lkml.org 
[lkml]   [2020]   [Mar]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 3/4] usb: ehci: Add new EHCI driver for Broadcom STB SoC's
Andy,

I've addressed all you suggestions.
Thanks.

On Fri, Mar 13, 2020 at 11:08 AM Andy Shevchenko
<andriy.shevchenko@linux.intel.com> wrote:
>
> On Fri, Mar 13, 2020 at 10:15:44AM -0400, Al Cooper wrote:
> > Add a new EHCI driver for Broadcom STB SoC's. A new EHCI driver
> > was created instead of adding support to the existing ehci platform
> > driver because of the code required to workaround bugs in the EHCI
> > controller.
>
> I'm not sure this is the best approach, but I leave it to maintainers.
>
> By the way, can you list what exactly the difference to the (generic)
> ehci driver?
>
> ...
>
> > +#include <linux/acpi.h>
> > +#include <linux/clk.h>
> > +#include <linux/dma-mapping.h>
> > +#include <linux/err.h>
> > +#include <linux/kernel.h>
> > +#include <linux/io.h>
> > +#include <linux/module.h>
> > +#include <linux/of.h>
> > +#include <linux/platform_device.h>
>
> ...
>
> > +/* ehci_brcm_wait_for_sof
> > + * Wait for start of next microframe, then wait extra delay microseconds
> > + */
>
> Style is inconsistent even inside this file.
>
> > +static inline void ehci_brcm_wait_for_sof(struct ehci_hcd *ehci, u32 delay)
> > +{
> > + int frame_idx = ehci_readl(ehci, &ehci->regs->frame_index);
>
> This is not needed if you use do {} while approach.
>
> > +
>
> > + while (frame_idx == ehci_readl(ehci, &ehci->regs->frame_index))
> > + ;
>
> Busy loop without even power management taking into consideration?
>
> Infinite loop?
>
> > + udelay(delay);
> > +}
>
> ...
>
> > +static const struct ehci_driver_overrides brcm_overrides __initconst = {
> > +
>
> > + .reset = ehci_brcm_reset,
>
> Indentation issue.
>
> > + .extra_priv_size = sizeof(struct brcm_priv),
> > +};
>
> ...
>
> > +static int ehci_brcm_probe(struct platform_device *pdev)
> > +{
>
> > + irq = platform_get_irq(pdev, 0);
> > + if (irq < 0) {
>
> > + dev_err(&pdev->dev, "no irq provided");
>
> Duplicate with core message.
>
> > + return irq;
> > + }
>
> > + /* initialize hcd */
> > + hcd = usb_create_hcd(&ehci_brcm_hc_driver,
> > + &pdev->dev, dev_name(&pdev->dev));
>
> At least this one will look much better (and fit one line) when you introduce
>
> struct device *dev = &pdev->dev;
>
> in the definition block above.
>
> > + if (!hcd)
> > + return -ENOMEM;
>
> > + return err;
> > +}
>
> ...
>
> > +static struct platform_driver ehci_brcm_driver = {
> > + .probe = ehci_brcm_probe,
> > + .remove = ehci_brcm_remove,
> > + .shutdown = usb_hcd_platform_shutdown,
> > + .driver = {
>
> > + .owner = THIS_MODULE,
>
> Do we need this?
>
> > + .name = "ehci-brcm",
> > + .pm = &ehci_brcm_pm_ops,
> > + .of_match_table = brcm_ehci_of_match,
> > + }
> > +};
>
> --
> With Best Regards,
> Andy Shevchenko
>
>

\
 
 \ /
  Last update: 2020-03-27 21:28    [W:0.104 / U:0.528 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site