lkml.org 
[lkml]   [2020]   [Mar]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 0/4] Add XHCI, EHCI and OHCI support for Broadcom STB SoS's
On Fri, Mar 13, 2020 at 12:18 PM Andy Shevchenko
<andriy.shevchenko@linux.intel.com> wrote:
>
> On Fri, Mar 13, 2020 at 10:15:41AM -0400, Al Cooper wrote:
> > This adds support for the XHCI, EHCI and OHCI host controllers found
> > in Broadcom STB SoC's. These drivers depend on getting access to the
> > new Broadcom STB USB PHY driver through a device-tree phandle and
> > will fail if the driver is not available.
>
> Hint to the future:
>
> scripts/get_maintainer.pl --git --git-min-percent=67 ...

Thanks, I'll use that in the future.

>
> >
> > Al Cooper (4):
> > dt-bindings: Add Broadcom STB USB support
> > usb: xhci: xhci-plat: Add support for Broadcom STB SoC's
> > usb: ehci: Add new EHCI driver for Broadcom STB SoC's
> > usb: host: Add ability to build new Broadcom STB USB drivers
> >
> > .../bindings/usb/brcm,bcm7445-ehci.yaml | 60 ++++
> > .../devicetree/bindings/usb/usb-xhci.txt | 1 +
> > MAINTAINERS | 9 +
> > drivers/usb/host/Kconfig | 20 ++
> > drivers/usb/host/Makefile | 20 +-
> > drivers/usb/host/ehci-brcm.c | 288 ++++++++++++++++++
> > drivers/usb/host/xhci-brcm.c | 16 +
> > drivers/usb/host/xhci-brcm.h | 16 +
> > drivers/usb/host/xhci-plat.c | 11 +
> > 9 files changed, 435 insertions(+), 6 deletions(-)
> > create mode 100644 Documentation/devicetree/bindings/usb/brcm,bcm7445-ehci.yaml
> > create mode 100644 drivers/usb/host/ehci-brcm.c
> > create mode 100644 drivers/usb/host/xhci-brcm.c
> > create mode 100644 drivers/usb/host/xhci-brcm.h
> >
> > --
> > 2.17.1
> >
>
> --
> With Best Regards,
> Andy Shevchenko
>
>

\
 
 \ /
  Last update: 2020-03-27 21:23    [W:0.095 / U:0.916 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site