lkml.org 
[lkml]   [2020]   [Mar]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH v2] drm/prime: fix extracting of the DMA addresses from a scatterlist
Date
>-----Original Message-----
>From: Marek Szyprowski <m.szyprowski@samsung.com>
>Sent: Friday, March 27, 2020 12:21 PM
>To: dri-devel@lists.freedesktop.org; linux-samsung-soc@vger.kernel.org;
>linux-kernel@vger.kernel.org
>Cc: Marek Szyprowski <m.szyprowski@samsung.com>;
>stable@vger.kernel.org; Bartlomiej Zolnierkiewicz
><b.zolnierkie@samsung.com>; Maarten Lankhorst
><maarten.lankhorst@linux.intel.com>; Maxime Ripard
><mripard@kernel.org>; Thomas Zimmermann <tzimmermann@suse.de>;
>David Airlie <airlied@linux.ie>; Daniel Vetter <daniel@ffwll.ch>; Alex Deucher
><alexander.deucher@amd.com>; Shane Francis <bigbeeshane@gmail.com>;
>Ruhl, Michael J <michael.j.ruhl@intel.com>
>Subject: [PATCH v2] drm/prime: fix extracting of the DMA addresses from a
>scatterlist
>
>Scatterlist elements contains both pages and DMA addresses, but one
>should not assume 1:1 relation between them. The sg->length is the size
>of the physical memory chunk described by the sg->page, while
>sg_dma_len(sg) is the size of the DMA (IO virtual) chunk described by
>the sg_dma_address(sg).
>
>The proper way of extracting both: pages and DMA addresses of the whole
>buffer described by a scatterlist it to iterate independently over the
>sg->pages/sg->length and sg_dma_address(sg)/sg_dma_len(sg) entries.
>
>Fixes: 42e67b479eab ("drm/prime: use dma length macro when mapping sg")
>Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
>Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
>---
> drivers/gpu/drm/drm_prime.c | 37 +++++++++++++++++++++++++-----------
>-
> 1 file changed, 25 insertions(+), 12 deletions(-)
>
>diff --git a/drivers/gpu/drm/drm_prime.c b/drivers/gpu/drm/drm_prime.c
>index 1de2cde2277c..282774e469ac 100644
>--- a/drivers/gpu/drm/drm_prime.c
>+++ b/drivers/gpu/drm/drm_prime.c
>@@ -962,27 +962,40 @@ int drm_prime_sg_to_page_addr_arrays(struct
>sg_table *sgt, struct page **pages,
> unsigned count;
> struct scatterlist *sg;
> struct page *page;
>- u32 len, index;
>+ u32 page_len, page_index;
> dma_addr_t addr;
>+ u32 dma_len, dma_index;
>
>- index = 0;
>+ /*
>+ * Scatterlist elements contains both pages and DMA addresses, but
>+ * one shoud not assume 1:1 relation between them. The sg->length
>is
>+ * the size of the physical memory chunk described by the sg->page,
>+ * while sg_dma_len(sg) is the size of the DMA (IO virtual) chunk
>+ * described by the sg_dma_address(sg).
>+ */

Is there an example of what the scatterlist would look like in this case?

Does each SG entry always have the page and dma info? or could you have
entries that have page information only, and entries that have dma info only?

If the same entry has different size info (page_len = PAGE_SIZE,
dma_len = 4 * PAGE_SIZE?), are we guaranteed that the arrays (page and addrs) have
been sized correctly?

Just trying to get my head wrapped around this.

Thanks,

Mike

>+ page_index = 0;
>+ dma_index = 0;
> for_each_sg(sgt->sgl, sg, sgt->nents, count) {
>- len = sg_dma_len(sg);
>+ page_len = sg->length;
> page = sg_page(sg);
>+ dma_len = sg_dma_len(sg);
> addr = sg_dma_address(sg);
>
>- while (len > 0) {
>- if (WARN_ON(index >= max_entries))
>+ while (pages && page_len > 0) {
>+ if (WARN_ON(page_index >= max_entries))
> return -1;
>- if (pages)
>- pages[index] = page;
>- if (addrs)
>- addrs[index] = addr;
>-
>+ pages[page_index] = page;
> page++;
>+ page_len -= PAGE_SIZE;
>+ page_index++;
>+ }
>+ while (addrs && dma_len > 0) {
>+ if (WARN_ON(dma_index >= max_entries))
>+ return -1;
>+ addrs[dma_index] = addr;
> addr += PAGE_SIZE;
>- len -= PAGE_SIZE;
>- index++;
>+ dma_len -= PAGE_SIZE;
>+ dma_index++;
> }
> }
> return 0;
>--
>2.17.1

\
 
 \ /
  Last update: 2020-03-27 19:32    [W:0.140 / U:3.908 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site