lkml.org 
[lkml]   [2020]   [Mar]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH v5 5/6] unicore32: replace setup_irq() by request_irq()
request_irq() is preferred over setup_irq(). Invocations of setup_irq()
occur after memory allocators are ready.

Per tglx[1], setup_irq() existed in olden days when allocators were not
ready by the time early interrupts were initialized.

Hence replace setup_irq() by request_irq().

[1] https://lkml.kernel.org/r/alpine.DEB.2.20.1710191609480.1971@nanos

Signed-off-by: afzal mohammed <afzal.mohd.ma@gmail.com>
---

Link to v3, v2 & v1,
[v3] https://lkml.kernel.org/r/20200304005137.5523-1-afzal.mohd.ma@gmail.com
[v2] https://lkml.kernel.org/r/cover.1582471508.git.afzal.mohd.ma@gmail.com
[v1] https://lkml.kernel.org/r/cover.1581478323.git.afzal.mohd.ma@gmail.com

v5:
* No change
v4:
* Non-existent
v3:
* Split out from tree wide series, as Thomas suggested to get it thr'
respective maintainers
* Modify pr_err displayed in case of error
* Re-arrange code & choose pr_err args as required to improve readability
* Remove irrelevant parts from commit message & improve

v2:
* Replace pr_err("request_irq() on %s failed" by
pr_err("%s: request_irq() failed"
* Commit message massage

arch/unicore32/kernel/time.c | 11 +++--------
1 file changed, 3 insertions(+), 8 deletions(-)

diff --git a/arch/unicore32/kernel/time.c b/arch/unicore32/kernel/time.c
index 8b217a761bf0..c3a37edf4d40 100644
--- a/arch/unicore32/kernel/time.c
+++ b/arch/unicore32/kernel/time.c
@@ -72,13 +72,6 @@ static struct clocksource cksrc_puv3_oscr = {
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};

-static struct irqaction puv3_timer_irq = {
- .name = "ost0",
- .flags = IRQF_TIMER | IRQF_IRQPOLL,
- .handler = puv3_ost0_interrupt,
- .dev_id = &ckevt_puv3_osmr0,
-};
-
void __init time_init(void)
{
writel(0, OST_OIER); /* disable any timer interrupts */
@@ -94,7 +87,9 @@ void __init time_init(void)
ckevt_puv3_osmr0.min_delta_ticks = MIN_OSCR_DELTA * 2;
ckevt_puv3_osmr0.cpumask = cpumask_of(0);

- setup_irq(IRQ_TIMER0, &puv3_timer_irq);
+ if (request_irq(IRQ_TIMER0, puv3_ost0_interrupt,
+ IRQF_TIMER | IRQF_IRQPOLL, "ost0", &ckevt_puv3_osmr0))
+ pr_err("Failed to register ost0 interrupt\n");

clocksource_register_hz(&cksrc_puv3_oscr, CLOCK_TICK_RATE);
clockevents_register_device(&ckevt_puv3_osmr0);
--
2.25.1
\
 
 \ /
  Last update: 2020-03-27 17:13    [W:0.173 / U:2.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site