Messages in this thread Patch in this message |  | | From | afzal mohammed <> | Subject | [PATCH v4 1/5] ARM: ep93xx: Replace setup_irq() by request_irq() | Date | Fri, 27 Mar 2020 18:11:43 +0530 |
| |
request_irq() is preferred over setup_irq(). Invocations of setup_irq() occur after memory allocators are ready.
Per tglx[1], setup_irq() existed in olden days when allocators were not ready by the time early interrupts were initialized.
Hence replace setup_irq() by request_irq().
[1] https://lkml.kernel.org/r/alpine.DEB.2.20.1710191609480.1971@nanos
Signed-off-by: afzal mohammed <afzal.mohd.ma@gmail.com> Acked-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> ---
v4: * Add received tags
v3: * Split out from series, also create subarch level patch as Thomas suggested to take it thr' respective maintainers * Modify string displayed in case of error as suggested by Thomas * Re-arrange code as required to improve readability * Remove irrelevant parts from commit message & improve v2: * Replace pr_err("request_irq() on %s failed" by pr_err("%s: request_irq() failed" * Commit message massage
arch/arm/mach-ep93xx/timer-ep93xx.c | 14 ++++++-------- 1 file changed, 6 insertions(+), 8 deletions(-)
diff --git a/arch/arm/mach-ep93xx/timer-ep93xx.c b/arch/arm/mach-ep93xx/timer-ep93xx.c index de998830f534..dd4b164d1831 100644 --- a/arch/arm/mach-ep93xx/timer-ep93xx.c +++ b/arch/arm/mach-ep93xx/timer-ep93xx.c @@ -117,15 +117,11 @@ static irqreturn_t ep93xx_timer_interrupt(int irq, void *dev_id) return IRQ_HANDLED; } -static struct irqaction ep93xx_timer_irq = { - .name = "ep93xx timer", - .flags = IRQF_TIMER | IRQF_IRQPOLL, - .handler = ep93xx_timer_interrupt, - .dev_id = &ep93xx_clockevent, -}; - void __init ep93xx_timer_init(void) { + int irq = IRQ_EP93XX_TIMER3; + unsigned long flags = IRQF_TIMER | IRQF_IRQPOLL; + /* Enable and register clocksource and sched_clock on timer 4 */ writel(EP93XX_TIMER4_VALUE_HIGH_ENABLE, EP93XX_TIMER4_VALUE_HIGH); @@ -136,7 +132,9 @@ void __init ep93xx_timer_init(void) EP93XX_TIMER4_RATE); /* Set up clockevent on timer 3 */ - setup_irq(IRQ_EP93XX_TIMER3, &ep93xx_timer_irq); + if (request_irq(irq, ep93xx_timer_interrupt, flags, "ep93xx timer", + &ep93xx_clockevent)) + pr_err("Failed to request irq %d (ep93xx timer)\n", irq); clockevents_config_and_register(&ep93xx_clockevent, EP93XX_TIMER123_RATE, 1, -- 2.25.1
|  |