lkml.org 
[lkml]   [2020]   [Mar]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRE: [PATCH v2 2/2] scsi: ufs-mediatek: add error recovery for suspend and resume
From
Date
Hi Avri,

On Fri, 2020-03-27 at 09:23 +0000, Avri Altman wrote:
> >
> > Once fail happens during suspend and resume flow if the desired low
> > power link state is H8, link recovery is required for MediaTek UFS
> > controller.
> >
> > For resume flow, since power and clocks are already enabled before
> > invoking vendor's resume callback, simply using ufshcd_link_recovery()
> > inside callback is fine.
> >
> > For suspend flow, the device power enters low power mode or is disabled
> > before suspend callback, thus ufshcd_link_recovery() can not be directly
> > used in callback. To leverage host reset flow during ufshcd_suspend(),
> > set link as off state enforcedly
> Not sure this is a proper English, but I'm not sure.
>
> to let ufshcd_host_reset_and_restore()
> > be executed by ufshcd_suspend().

Thanks for your review! I will fix this sentence in next version.

Stanley Chu
\
 
 \ /
  Last update: 2020-03-27 10:55    [W:0.060 / U:2.296 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site