[lkml]   [2020]   [Mar]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH v6 0/3] Add support for CellWise cw2015 fuel gauge
This patchset adds support for the CellWise cw2015 fuel gauge.

The CellWise cw2015 fuel gauge is a shuntless, single-cell Li-Ion fuel
gauge. It is used in the pine64 Pinebook Pro laptop.

This is v6 of the patchset. This version fixes binding issues found
by Rob.

I've kept the cellwise,battery-profile property in the device tree. Its
content describes characteristics of the battery built into a device. The
exact format is unknown and not publicly documented. It is likely
comprised of some key parameters of the battery (chemistry, voltages,
design capacity) and parameters for tuning the internal state of charge
approximation function.
Since v2 CellWise has confirmed to me that the only way to obtain the
profile blob is to mail them batteries for testing. Thus we will need to
keep that property.

In general I'm not 100 % sure about my json-schema binding for the gauge.
It is my first time ever writing a json-schema binding and I'm not sure
whether properties like power-supplies or monitored-battery need to be
added to a separate, common schema for power supplies or not.

Best Regards,

Tobias Schramm

* Change subject to "Add support for CellWise cw2015 fuel gauge"
* Rewrite bindings as json-schema
* Use default power-supplies handling
* Use regmap for register access
* Use standard simple-battery node
* Replace printk/pr_* by dev_{dbg,info,warn,err}
* Use cancel_delayed_work_sync in remove
* General code cleanup
* Incorporate review by Andy
* Add cellwise vendor prefix
* Rename cellwise,bat-config-info property to cellwise,battery-profile
* Remove most state of charge post-processing
* Use fwnode interface
* General code cleanup
* Lots of code style fixes
* Implement additional changes requested by Andy
* Use fwnode inline wrappers
* Clean up waiting for gauge
* Minor code style fixes
* Clean up includes
* Handle errors during device property parsing
* Refactor device property parsing
* Replace i2c->probe by i2c->probe_new
* More code style fixes
* Fix bindings according to review by Rob

Tobias Schramm (3):
dt-bindings: Document cellwise vendor-prefix
dt-bindings: power: supply: add cw2015_battery bindings
power: supply: add CellWise cw2015 fuel gauge driver

.../bindings/power/supply/cw2015_battery.yaml | 82 ++
.../devicetree/bindings/vendor-prefixes.yaml | 2 +
drivers/power/supply/Kconfig | 11 +
drivers/power/supply/Makefile | 1 +
drivers/power/supply/cw2015_battery.c | 749 ++++++++++++++++++
6 files changed, 851 insertions(+)
create mode 100644 Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml
create mode 100644 drivers/power/supply/cw2015_battery.c


 \ /
  Last update: 2020-03-21 13:54    [W:0.037 / U:0.948 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site