lkml.org 
[lkml]   [2020]   [Mar]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
SubjectRe: [PATCH] media: Refactor configuration options
From
Date
Hello Mauro,

Thanks for your prompt reply!

On Sat, 2020-03-21 at 11:35 +0100, Mauro Carvalho Chehab wrote:
> Em Sat, 21 Mar 2020 03:41:27 -0300
> Ezequiel Garcia <ezequiel@collabora.com> escreveu:
>
> > The Media subsystem has a set of configuration options
> > that control the visibility of other options, the
> > latter group associated to device driver enablement.
> >
> > In other words, it currently has two levels:
> > "support" options and "driver enablement" options.
> >
> > The "support" configuration options currently are:
> >
> > * Analog TV support
> > * Digital TV support
> > * Camera and grabbers support
> > * AM/FM radio support
> > * HDMI CEC support
> > * SDR support
> >
> > The "device driver enablement" options are:
> >
> > * USB devices
> > * PCI devices
> > * Platform-specific devices
> > * Memory-to-memory devices
> > * DVB devices
> > * CEC devices
> > * SDR devices
> > * ...
> >
> > In order to simplify the above, refactor the media configuration,
> > mostly by dropping the "support" options, which don't seem to
> > be really required.
> >
> > In other words, the following are removed: MEDIA_ANALOG_TV_SUPPORT,
> > MEDIA_DIGITAL_TV_SUPPORT, MEDIA_CAMERA_SUPPORT, MEDIA_RADIO_SUPPORT,
> > MEDIA_CEC_SUPPORT and MEDIA_SDR_SUPPORT.
> >
> > As a result, the configuration is now simplified. Users
> > will find USB capture devices under "Media USB Adapters",
> > or CEC adapters under "CEC platform devices", without
> > the need to enable any other "support" options.
>
> Nack.
>

Well, at least I got your attention on this topic :-)

> Those *_SUPPORT options were added to make life easier for users.
> There are too many things to be customized for a poor user to
> select the right options. So, from an end-user's perspective,
> what he really wants is:
>

Do you think end-user's configure their own kernel?

I was under the assumption an end-user would use
a distribution kernel. And distributions would take care
of packaging what end-users need.

> "let me enable my TV card
> or:
> "I want to enable camera support"
>
> They usually don't know what driver supports it, nor what are
> the other drivers that should be enabled behind the scenes.
>
> Those options helps the users to reduce the amount of options
> for them to identify what they really bother, instead of
> presenting thousands of options they would need.
>
> Now, if you, instead, add some patch that would allow them
> to do something like:
>
> make board=<usb id> / make board=<pci id>
>
> Then this would be very welcomed.
>

Hm, I see.

So, another option is to clean memory-to-memory devices
(codecs). There are no end-users for these devices,
and they aren't really "Cameras/video grabbers".

I am not sure why we've added them under CAMERA_SUPPORT.
I'd love to get rid of at least that dependency.

diff --git a/drivers/media/mc/Kconfig b/drivers/media/mc/Kconfig
index 3b9795cfcb36..9382e35211ca 100644
--- a/drivers/media/mc/Kconfig
+++ b/drivers/media/mc/Kconfig
@@ -5,7 +5,6 @@

config MEDIA_CONTROLLER
bool "Media Controller API"
- depends on MEDIA_CAMERA_SUPPORT || MEDIA_ANALOG_TV_SUPPORT || MEDIA_DIGITAL_TV_SUPPORT
help
Enable the media controller API used to query media devices internal
topology and configure it dynamically.
diff --git a/drivers/media/platform/Kconfig b/drivers/media/platform/Kconfig
index f65e98d3adf2..dc5869dac5dc 100644
--- a/drivers/media/platform/Kconfig
+++ b/drivers/media/platform/Kconfig
@@ -5,7 +5,6 @@

menuconfig V4L_PLATFORM_DRIVERS
bool "V4L platform devices"
- depends on MEDIA_CAMERA_SUPPORT
help
Say Y here to enable support for platform-specific V4L drivers.

@@ -43,7 +42,6 @@ config VIDEO_ASPEED

config VIDEO_SH_VOU
tristate "SuperH VOU video output driver"
- depends on MEDIA_CAMERA_SUPPORT
depends on VIDEO_DEV && I2C
depends on ARCH_SHMOBILE || COMPILE_TEST
select VIDEOBUF2_DMA_CONTIG
@@ -165,7 +163,6 @@ endif # V4L_PLATFORM_DRIVERS
menuconfig V4L_MEM2MEM_DRIVERS
bool "Memory-to-memory multimedia devices"
depends on VIDEO_V4L2
- depends on MEDIA_CAMERA_SUPPORT
help
Say Y here to enable selecting drivers for V4L devices that
use system memory for both source and destination buffers, as opposed
@@ -522,7 +519,6 @@ config VIDEO_TI_CSC

menuconfig V4L_TEST_DRIVERS
bool "Media test drivers"
- depends on MEDIA_CAMERA_SUPPORT

if V4L_TEST_DRIVERS

Cheers,
Ezequiel

> > Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
> > ---
> > drivers/media/Kconfig | 61 ----------------------------
> > drivers/media/dvb-frontends/Kconfig | 2 +-
> > drivers/media/i2c/Kconfig | 14 +------
> > drivers/media/i2c/m5mols/Kconfig | 1 -
> > drivers/media/i2c/smiapp/Kconfig | 1 -
> > drivers/media/mc/Kconfig | 1 -
> > drivers/media/pci/Kconfig | 18 ++------
> > drivers/media/pci/bt8xx/Kconfig | 1 -
> > drivers/media/platform/Kconfig | 7 ----
> > drivers/media/radio/Kconfig | 1 -
> > drivers/media/tuners/Kconfig | 8 ++--
> > drivers/media/usb/Kconfig | 29 ++++---------
> > drivers/media/usb/dvb-usb-v2/Kconfig | 2 +-
> > drivers/media/usb/em28xx/Kconfig | 4 +-
> > drivers/media/usb/go7007/Kconfig | 2 +-
> > sound/pci/Kconfig | 2 -
> > 16 files changed, 20 insertions(+), 134 deletions(-)
> >
> > diff --git a/drivers/media/Kconfig b/drivers/media/Kconfig
> > index 9dfea5c4b6ab..fcbf265a92cd 100644
> > --- a/drivers/media/Kconfig
> > +++ b/drivers/media/Kconfig
> > @@ -30,63 +30,6 @@ comment "Multimedia core support"
> > #
> > # Multimedia support - automatically enable V4L2 and DVB core
> > #
> > -config MEDIA_CAMERA_SUPPORT
> > - bool "Cameras/video grabbers support"
> > - help
> > - Enable support for webcams and video grabbers.
> > -
> > - Say Y when you have a webcam or a video capture grabber board.
> > -
> > -config MEDIA_ANALOG_TV_SUPPORT
> > - bool "Analog TV support"
> > - help
> > - Enable analog TV support.
> > -
> > - Say Y when you have a TV board with analog support or with a
> > - hybrid analog/digital TV chipset.
> > -
> > - Note: There are several DVB cards that are based on chips that
> > - support both analog and digital TV. Disabling this option
> > - will disable support for them.
> > -
> > -config MEDIA_DIGITAL_TV_SUPPORT
> > - bool "Digital TV support"
> > - help
> > - Enable digital TV support.
> > -
> > - Say Y when you have a board with digital support or a board with
> > - hybrid digital TV and analog TV.
> > -
> > -config MEDIA_RADIO_SUPPORT
> > - bool "AM/FM radio receivers/transmitters support"
> > - help
> > - Enable AM/FM radio support.
> > -
> > - Additional info and docs are available on the web at
> > - <https://linuxtv.org>
> > -
> > - Say Y when you have a board with radio support.
> > -
> > - Note: There are several TV cards that are based on chips that
> > - support radio reception. Disabling this option will
> > - disable support for them.
> > -
> > -config MEDIA_SDR_SUPPORT
> > - bool "Software defined radio support"
> > - help
> > - Enable software defined radio support.
> > -
> > - Say Y when you have a software defined radio device.
> > -
> > -config MEDIA_CEC_SUPPORT
> > - bool "HDMI CEC support"
> > - help
> > - Enable support for HDMI CEC (Consumer Electronics Control),
> > - which is an optional HDMI feature.
> > -
> > - Say Y when you have an HDMI receiver, transmitter or a USB CEC
> > - adapter that supports HDMI CEC.
> > -
> > source "drivers/media/cec/Kconfig"
> >
> > source "drivers/media/mc/Kconfig"
> > @@ -99,7 +42,6 @@ source "drivers/media/mc/Kconfig"
> > config VIDEO_DEV
> > tristate
> > depends on MEDIA_SUPPORT
> > - depends on MEDIA_CAMERA_SUPPORT || MEDIA_ANALOG_TV_SUPPORT || MEDIA_RADIO_SUPPORT || MEDIA_SDR_SUPPORT
> > default y
> >
> > config VIDEO_V4L2_SUBDEV_API
> > @@ -121,7 +63,6 @@ source "drivers/media/v4l2-core/Kconfig"
> > config DVB_CORE
> > tristate
> > depends on MEDIA_SUPPORT
> > - depends on MEDIA_DIGITAL_TV_SUPPORT
> > depends on (I2C || I2C=n)
> > default y
> > select CRC32
> > @@ -186,7 +127,6 @@ comment "Media ancillary drivers (tuners, sensors, i2c, spi, frontends)"
> >
> > config MEDIA_SUBDRV_AUTOSELECT
> > bool "Autoselect ancillary drivers (tuners, sensors, i2c, spi, frontends)"
> > - depends on MEDIA_ANALOG_TV_SUPPORT || MEDIA_DIGITAL_TV_SUPPORT || MEDIA_CAMERA_SUPPORT || MEDIA_SDR_SUPPORT
> > depends on HAS_IOMEM
> > select I2C
> > select I2C_MUX
> > @@ -214,7 +154,6 @@ config MEDIA_HIDE_ANCILLARY_SUBDRV
> >
> > config MEDIA_ATTACH
> > bool
> > - depends on MEDIA_ANALOG_TV_SUPPORT || MEDIA_DIGITAL_TV_SUPPORT || MEDIA_RADIO_SUPPORT
> > depends on MODULES
> > default MODULES
> >
> > diff --git a/drivers/media/dvb-frontends/Kconfig b/drivers/media/dvb-frontends/Kconfig
> > index a29e9ddf9c82..832f66b91459 100644
> > --- a/drivers/media/dvb-frontends/Kconfig
> > +++ b/drivers/media/dvb-frontends/Kconfig
> > @@ -518,7 +518,7 @@ config DVB_RTL2832
> >
> > config DVB_RTL2832_SDR
> > tristate "Realtek RTL2832 SDR"
> > - depends on DVB_CORE && I2C && I2C_MUX && VIDEO_V4L2 && MEDIA_SDR_SUPPORT && USB
> > + depends on DVB_CORE && I2C && I2C_MUX && VIDEO_V4L2 && USB
> > select DVB_RTL2832
> > select VIDEOBUF2_VMALLOC
> > default m if !MEDIA_SUBDRV_AUTOSELECT
> > diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
> > index 125d596c13dd..92e51c288321 100644
> > --- a/drivers/media/i2c/Kconfig
> > +++ b/drivers/media/i2c/Kconfig
> > @@ -568,8 +568,6 @@ config VIDEO_APTINA_PLL
> > config VIDEO_SMIAPP_PLL
> > tristate
> >
> > -if MEDIA_CAMERA_SUPPORT
> > -
> > config VIDEO_HI556
> > tristate "Hynix Hi-556 sensor support"
> > depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
> > @@ -1007,12 +1005,9 @@ config VIDEO_S5C73M3
> > help
> > This is a V4L2 sensor driver for Samsung S5C73M3
> > 8 Mpixel camera.
> > -endif
> >
> > comment "Lens drivers"
> >
> > -if MEDIA_CAMERA_SUPPORT
> > -
> > config VIDEO_AD5820
> > tristate "AD5820 lens voice coil support"
> > depends on GPIOLIB && I2C && VIDEO_V4L2 && MEDIA_CONTROLLER
> > @@ -1050,12 +1045,8 @@ config VIDEO_DW9807_VCM
> > capability. This is designed for linear control of
> > voice coil motors, controlled via I2C serial interface.
> >
> > -endif
> > -
> > comment "Flash devices"
> >
> > -if MEDIA_CAMERA_SUPPORT
> > -
> > config VIDEO_ADP1653
> > tristate "ADP1653 flash support"
> > depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER
> > @@ -1079,8 +1070,6 @@ config VIDEO_LM3646
> > This is a driver for the lm3646 dual flash controllers. It controls
> > flash, torch LEDs.
> >
> > -endif
> > -
> > comment "Video improvement chips"
> >
> > config VIDEO_UPD64031A
> > @@ -1123,7 +1112,7 @@ comment "SDR tuner chips"
> >
> > config SDR_MAX2175
> > tristate "Maxim 2175 RF to Bits tuner"
> > - depends on VIDEO_V4L2 && MEDIA_SDR_SUPPORT && I2C
> > + depends on VIDEO_V4L2 && I2C
> > select REGMAP_I2C
> > help
> > Support for Maxim 2175 tuner. It is an advanced analog/digital
> > @@ -1169,7 +1158,6 @@ config VIDEO_I2C
> > config VIDEO_ST_MIPID02
> > tristate "STMicroelectronics MIPID02 CSI-2 to PARALLEL bridge"
> > depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
> > - depends on MEDIA_CAMERA_SUPPORT
> > select V4L2_FWNODE
> > help
> > Support for STMicroelectronics MIPID02 CSI-2 to PARALLEL bridge.
> > diff --git a/drivers/media/i2c/m5mols/Kconfig b/drivers/media/i2c/m5mols/Kconfig
> > index e573482f269f..91c0dafc7668 100644
> > --- a/drivers/media/i2c/m5mols/Kconfig
> > +++ b/drivers/media/i2c/m5mols/Kconfig
> > @@ -2,6 +2,5 @@
> > config VIDEO_M5MOLS
> > tristate "Fujitsu M-5MOLS 8MP sensor support"
> > depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
> > - depends on MEDIA_CAMERA_SUPPORT
> > help
> > This driver supports Fujitsu M-5MOLS camera sensor with ISP
> > diff --git a/drivers/media/i2c/smiapp/Kconfig b/drivers/media/i2c/smiapp/Kconfig
> > index fcaa7f9494a8..a2f5775dfcac 100644
> > --- a/drivers/media/i2c/smiapp/Kconfig
> > +++ b/drivers/media/i2c/smiapp/Kconfig
> > @@ -2,7 +2,6 @@
> > config VIDEO_SMIAPP
> > tristate "SMIA++/SMIA sensor support"
> > depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API && HAVE_CLK
> > - depends on MEDIA_CAMERA_SUPPORT
> > select VIDEO_SMIAPP_PLL
> > select V4L2_FWNODE
> > help
> > diff --git a/drivers/media/mc/Kconfig b/drivers/media/mc/Kconfig
> > index 3b9795cfcb36..9382e35211ca 100644
> > --- a/drivers/media/mc/Kconfig
> > +++ b/drivers/media/mc/Kconfig
> > @@ -5,7 +5,6 @@
> >
> > config MEDIA_CONTROLLER
> > bool "Media Controller API"
> > - depends on MEDIA_CAMERA_SUPPORT || MEDIA_ANALOG_TV_SUPPORT || MEDIA_DIGITAL_TV_SUPPORT
> > help
> > Enable the media controller API used to query media devices internal
> > topology and configure it dynamically.
> > diff --git a/drivers/media/pci/Kconfig b/drivers/media/pci/Kconfig
> > index dcb3719f440e..3d2cc135acd6 100644
> > --- a/drivers/media/pci/Kconfig
> > +++ b/drivers/media/pci/Kconfig
> > @@ -9,25 +9,20 @@ menuconfig MEDIA_PCI_SUPPORT
> >
> > if MEDIA_PCI_SUPPORT
> >
> > -if MEDIA_CAMERA_SUPPORT
> > - comment "Media capture support"
> > +comment "Media capture support"
> > source "drivers/media/pci/meye/Kconfig"
> > source "drivers/media/pci/solo6x10/Kconfig"
> > source "drivers/media/pci/sta2x11/Kconfig"
> > source "drivers/media/pci/tw5864/Kconfig"
> > source "drivers/media/pci/tw68/Kconfig"
> > source "drivers/media/pci/tw686x/Kconfig"
> > -endif
> >
> > -if MEDIA_ANALOG_TV_SUPPORT
> > - comment "Media capture/analog TV support"
> > +comment "Media capture/analog TV support"
> > source "drivers/media/pci/ivtv/Kconfig"
> > source "drivers/media/pci/saa7146/Kconfig"
> > source "drivers/media/pci/dt3155/Kconfig"
> > -endif
> >
> > -if MEDIA_ANALOG_TV_SUPPORT || MEDIA_DIGITAL_TV_SUPPORT
> > - comment "Media capture/analog/hybrid TV support"
> > +comment "Media capture/analog/hybrid TV support"
> > source "drivers/media/pci/cx18/Kconfig"
> > source "drivers/media/pci/cx23885/Kconfig"
> > source "drivers/media/pci/cx25821/Kconfig"
> > @@ -37,10 +32,7 @@ source "drivers/media/pci/saa7134/Kconfig"
> > source "drivers/media/pci/saa7164/Kconfig"
> > source "drivers/media/pci/cobalt/Kconfig"
> >
> > -endif
> > -
> > -if MEDIA_DIGITAL_TV_SUPPORT
> > - comment "Media digital TV PCI Adapters"
> > +comment "Media digital TV PCI Adapters"
> > source "drivers/media/pci/ttpci/Kconfig"
> > source "drivers/media/pci/b2c2/Kconfig"
> > source "drivers/media/pci/pluto2/Kconfig"
> > @@ -52,8 +44,6 @@ source "drivers/media/pci/ngene/Kconfig"
> > source "drivers/media/pci/ddbridge/Kconfig"
> > source "drivers/media/pci/smipcie/Kconfig"
> > source "drivers/media/pci/netup_unidvb/Kconfig"
> > -endif
> > -
> > source "drivers/media/pci/intel/ipu3/Kconfig"
> >
> > endif #MEDIA_PCI_SUPPORT
> > diff --git a/drivers/media/pci/bt8xx/Kconfig b/drivers/media/pci/bt8xx/Kconfig
> > index 75d172a6f54c..a4522c35d606 100644
> > --- a/drivers/media/pci/bt8xx/Kconfig
> > +++ b/drivers/media/pci/bt8xx/Kconfig
> > @@ -5,7 +5,6 @@ config VIDEO_BT848
> > select I2C_ALGOBIT
> > select VIDEOBUF_DMA_SG
> > depends on RC_CORE
> > - depends on MEDIA_RADIO_SUPPORT
> > select VIDEO_TUNER
> > select VIDEO_TVEEPROM
> > select VIDEO_MSP3400 if MEDIA_SUBDRV_AUTOSELECT
> > diff --git a/drivers/media/platform/Kconfig b/drivers/media/platform/Kconfig
> > index e01bbb9dd1c1..6d48338e8100 100644
> > --- a/drivers/media/platform/Kconfig
> > +++ b/drivers/media/platform/Kconfig
> > @@ -5,7 +5,6 @@
> >
> > menuconfig V4L_PLATFORM_DRIVERS
> > bool "V4L platform devices"
> > - depends on MEDIA_CAMERA_SUPPORT
> > help
> > Say Y here to enable support for platform-specific V4L drivers.
> >
> > @@ -43,7 +42,6 @@ config VIDEO_ASPEED
> >
> > config VIDEO_SH_VOU
> > tristate "SuperH VOU video output driver"
> > - depends on MEDIA_CAMERA_SUPPORT
> > depends on VIDEO_DEV && I2C
> > depends on ARCH_SHMOBILE || COMPILE_TEST
> > select VIDEOBUF2_DMA_CONTIG
> > @@ -165,7 +163,6 @@ endif # V4L_PLATFORM_DRIVERS
> > menuconfig V4L_MEM2MEM_DRIVERS
> > bool "Memory-to-memory multimedia devices"
> > depends on VIDEO_V4L2
> > - depends on MEDIA_CAMERA_SUPPORT
> > help
> > Say Y here to enable selecting drivers for V4L devices that
> > use system memory for both source and destination buffers, as opposed
> > @@ -534,7 +531,6 @@ config VIDEO_TI_CSC
> >
> > menuconfig V4L_TEST_DRIVERS
> > bool "Media test drivers"
> > - depends on MEDIA_CAMERA_SUPPORT
> >
> > if V4L_TEST_DRIVERS
> >
> > @@ -557,7 +553,6 @@ endif #V4L_TEST_DRIVERS
> >
> > menuconfig DVB_PLATFORM_DRIVERS
> > bool "DVB platform devices"
> > - depends on MEDIA_DIGITAL_TV_SUPPORT
> > help
> > Say Y here to enable support for platform-specific Digital TV drivers.
> >
> > @@ -567,7 +562,6 @@ endif #DVB_PLATFORM_DRIVERS
> >
> > menuconfig CEC_PLATFORM_DRIVERS
> > bool "CEC platform devices"
> > - depends on MEDIA_CEC_SUPPORT
> >
> > if CEC_PLATFORM_DRIVERS
> >
> > @@ -692,7 +686,6 @@ endif #CEC_PLATFORM_DRIVERS
> >
> > menuconfig SDR_PLATFORM_DRIVERS
> > bool "SDR platform devices"
> > - depends on MEDIA_SDR_SUPPORT
> > help
> > Say Y here to enable support for platform-specific SDR Drivers.
> >
> > diff --git a/drivers/media/radio/Kconfig b/drivers/media/radio/Kconfig
> > index eb79d99787bd..e19ba6ab6e48 100644
> > --- a/drivers/media/radio/Kconfig
> > +++ b/drivers/media/radio/Kconfig
> > @@ -6,7 +6,6 @@
> > menuconfig RADIO_ADAPTERS
> > bool "Radio Adapters"
> > depends on VIDEO_V4L2
> > - depends on MEDIA_RADIO_SUPPORT
> > default y
> > help
> > Say Y here to enable selecting AM/FM radio adapters.
> > diff --git a/drivers/media/tuners/Kconfig b/drivers/media/tuners/Kconfig
> > index e104bb7766e1..7af7ff174eea 100644
> > --- a/drivers/media/tuners/Kconfig
> > +++ b/drivers/media/tuners/Kconfig
> > @@ -2,26 +2,24 @@
> > # Analog TV tuners, auto-loaded via tuner.ko
> > config MEDIA_TUNER
> > tristate
> > - depends on (MEDIA_ANALOG_TV_SUPPORT || MEDIA_DIGITAL_TV_SUPPORT || MEDIA_RADIO_SUPPORT || MEDIA_SDR_SUPPORT) && I2C
> > + depends on I2C
> > default y
> > select MEDIA_TUNER_XC2028 if MEDIA_SUBDRV_AUTOSELECT
> > select MEDIA_TUNER_XC5000 if MEDIA_SUBDRV_AUTOSELECT
> > select MEDIA_TUNER_XC4000 if MEDIA_SUBDRV_AUTOSELECT
> > select MEDIA_TUNER_MT20XX if MEDIA_SUBDRV_AUTOSELECT
> > select MEDIA_TUNER_TDA8290 if MEDIA_SUBDRV_AUTOSELECT
> > - select MEDIA_TUNER_TEA5761 if MEDIA_SUBDRV_AUTOSELECT && MEDIA_RADIO_SUPPORT
> > - select MEDIA_TUNER_TEA5767 if MEDIA_SUBDRV_AUTOSELECT && MEDIA_RADIO_SUPPORT
> > + select MEDIA_TUNER_TEA5761 if MEDIA_SUBDRV_AUTOSELECT
> > + select MEDIA_TUNER_TEA5767 if MEDIA_SUBDRV_AUTOSELECT
> > select MEDIA_TUNER_SIMPLE if MEDIA_SUBDRV_AUTOSELECT
> > select MEDIA_TUNER_TDA9887 if MEDIA_SUBDRV_AUTOSELECT
> > select MEDIA_TUNER_MC44S803 if MEDIA_SUBDRV_AUTOSELECT
> >
> > comment "Tuner drivers hidden by 'Autoselect ancillary drivers'"
> > depends on MEDIA_HIDE_ANCILLARY_SUBDRV
> > - depends on MEDIA_ANALOG_TV_SUPPORT || MEDIA_DIGITAL_TV_SUPPORT || MEDIA_RADIO_SUPPORT || MEDIA_SDR_SUPPORT
> >
> > menu "Customize TV tuners"
> > visible if !MEDIA_HIDE_ANCILLARY_SUBDRV
> > - depends on MEDIA_ANALOG_TV_SUPPORT || MEDIA_DIGITAL_TV_SUPPORT || MEDIA_RADIO_SUPPORT || MEDIA_SDR_SUPPORT
> >
> > config MEDIA_TUNER_SIMPLE
> > tristate "Simple tuner support"
> > diff --git a/drivers/media/usb/Kconfig b/drivers/media/usb/Kconfig
> > index e678d3d11467..72c88b1add55 100644
> > --- a/drivers/media/usb/Kconfig
> > +++ b/drivers/media/usb/Kconfig
> > @@ -9,8 +9,7 @@ menuconfig MEDIA_USB_SUPPORT
> >
> > if MEDIA_USB_SUPPORT
> >
> > -if MEDIA_CAMERA_SUPPORT
> > - comment "Webcam devices"
> > +comment "Webcam devices"
> > source "drivers/media/usb/uvc/Kconfig"
> > source "drivers/media/usb/gspca/Kconfig"
> > source "drivers/media/usb/pwc/Kconfig"
> > @@ -19,26 +18,19 @@ source "drivers/media/usb/zr364xx/Kconfig"
> > source "drivers/media/usb/stkwebcam/Kconfig"
> > source "drivers/media/usb/s2255/Kconfig"
> > source "drivers/media/usb/usbtv/Kconfig"
> > -endif
> >
> > -if MEDIA_ANALOG_TV_SUPPORT
> > - comment "Analog TV USB devices"
> > +comment "Analog TV USB devices"
> > source "drivers/media/usb/pvrusb2/Kconfig"
> > source "drivers/media/usb/hdpvr/Kconfig"
> > source "drivers/media/usb/stk1160/Kconfig"
> > source "drivers/media/usb/go7007/Kconfig"
> > -endif
> >
> > -if (MEDIA_ANALOG_TV_SUPPORT || MEDIA_DIGITAL_TV_SUPPORT)
> > - comment "Analog/digital TV USB devices"
> > +comment "Analog/digital TV USB devices"
> > source "drivers/media/usb/au0828/Kconfig"
> > source "drivers/media/usb/cx231xx/Kconfig"
> > source "drivers/media/usb/tm6000/Kconfig"
> > -endif
> >
> > -
> > -if I2C && MEDIA_DIGITAL_TV_SUPPORT
> > - comment "Digital TV USB devices"
> > +comment "Digital TV USB devices"
> > source "drivers/media/usb/dvb-usb/Kconfig"
> > source "drivers/media/usb/dvb-usb-v2/Kconfig"
> > source "drivers/media/usb/ttusb-budget/Kconfig"
> > @@ -46,25 +38,18 @@ source "drivers/media/usb/ttusb-dec/Kconfig"
> > source "drivers/media/usb/siano/Kconfig"
> > source "drivers/media/usb/b2c2/Kconfig"
> > source "drivers/media/usb/as102/Kconfig"
> > -endif
> >
> > -if (MEDIA_CAMERA_SUPPORT || MEDIA_ANALOG_TV_SUPPORT || MEDIA_DIGITAL_TV_SUPPORT)
> > - comment "Webcam, TV (analog/digital) USB devices"
> > +comment "Webcam, TV (analog/digital) USB devices"
> > source "drivers/media/usb/em28xx/Kconfig"
> > -endif
> >
> > -if MEDIA_SDR_SUPPORT
> > - comment "Software defined radio USB devices"
> > +comment "Software defined radio USB devices"
> > source "drivers/media/usb/airspy/Kconfig"
> > source "drivers/media/usb/hackrf/Kconfig"
> > source "drivers/media/usb/msi2500/Kconfig"
> > -endif
> >
> > -if MEDIA_CEC_SUPPORT
> > - comment "USB HDMI CEC adapters"
> > +comment "USB HDMI CEC adapters"
> > source "drivers/media/usb/pulse8-cec/Kconfig"
> > source "drivers/media/usb/rainshadow-cec/Kconfig"
> > -endif
> >
> > endif #MEDIA_USB_SUPPORT
> > endif #USB
> > diff --git a/drivers/media/usb/dvb-usb-v2/Kconfig b/drivers/media/usb/dvb-usb-v2/Kconfig
> > index b21a4d413872..8ebda4361b65 100644
> > --- a/drivers/media/usb/dvb-usb-v2/Kconfig
> > +++ b/drivers/media/usb/dvb-usb-v2/Kconfig
> > @@ -137,7 +137,7 @@ config DVB_USB_RTL28XXU
> > select DVB_CXD2841ER if MEDIA_SUBDRV_AUTOSELECT
> > select DVB_RTL2830
> > select DVB_RTL2832
> > - select DVB_RTL2832_SDR if (MEDIA_SUBDRV_AUTOSELECT && MEDIA_SDR_SUPPORT)
> > + select DVB_RTL2832_SDR if MEDIA_SUBDRV_AUTOSELECT
> > select DVB_SI2168 if MEDIA_SUBDRV_AUTOSELECT
> > select MEDIA_TUNER_E4000 if MEDIA_SUBDRV_AUTOSELECT
> > select MEDIA_TUNER_FC0012 if MEDIA_SUBDRV_AUTOSELECT
> > diff --git a/drivers/media/usb/em28xx/Kconfig b/drivers/media/usb/em28xx/Kconfig
> > index f2031a933e54..7031d6e80304 100644
> > --- a/drivers/media/usb/em28xx/Kconfig
> > +++ b/drivers/media/usb/em28xx/Kconfig
> > @@ -12,8 +12,8 @@ config VIDEO_EM28XX_V4L2
> > select VIDEO_SAA711X if MEDIA_SUBDRV_AUTOSELECT
> > select VIDEO_TVP5150 if MEDIA_SUBDRV_AUTOSELECT
> > select VIDEO_MSP3400 if MEDIA_SUBDRV_AUTOSELECT
> > - select VIDEO_MT9V011 if MEDIA_SUBDRV_AUTOSELECT && MEDIA_CAMERA_SUPPORT
> > - select VIDEO_OV2640 if MEDIA_SUBDRV_AUTOSELECT && MEDIA_CAMERA_SUPPORT
> > + select VIDEO_MT9V011 if MEDIA_SUBDRV_AUTOSELECT
> > + select VIDEO_OV2640 if MEDIA_SUBDRV_AUTOSELECT
> > help
> > This is a video4linux driver for Empia 28xx based TV cards.
> >
> > diff --git a/drivers/media/usb/go7007/Kconfig b/drivers/media/usb/go7007/Kconfig
> > index 4ff79940ad8d..533e95375082 100644
> > --- a/drivers/media/usb/go7007/Kconfig
> > +++ b/drivers/media/usb/go7007/Kconfig
> > @@ -12,7 +12,7 @@ config VIDEO_GO7007
> > select VIDEO_TW2804 if MEDIA_SUBDRV_AUTOSELECT
> > select VIDEO_TW9903 if MEDIA_SUBDRV_AUTOSELECT
> > select VIDEO_TW9906 if MEDIA_SUBDRV_AUTOSELECT
> > - select VIDEO_OV7640 if MEDIA_SUBDRV_AUTOSELECT && MEDIA_CAMERA_SUPPORT
> > + select VIDEO_OV7640 if MEDIA_SUBDRV_AUTOSELECT
> > select VIDEO_UDA1342 if MEDIA_SUBDRV_AUTOSELECT
> > help
> > This is a video4linux driver for the WIS GO7007 MPEG
> > diff --git a/sound/pci/Kconfig b/sound/pci/Kconfig
> > index 93bc9bef7641..e68af4112505 100644
> > --- a/sound/pci/Kconfig
> > +++ b/sound/pci/Kconfig
> > @@ -557,7 +557,6 @@ config SND_ES1968_INPUT
> > config SND_ES1968_RADIO
> > bool "Enable TEA5757 radio tuner support for es1968"
> > depends on SND_ES1968
> > - depends on MEDIA_RADIO_SUPPORT
> > depends on VIDEO_V4L2=y || VIDEO_V4L2=SND_ES1968
> > select RADIO_ADAPTERS
> > select RADIO_TEA575X
> > @@ -581,7 +580,6 @@ config SND_FM801
> > config SND_FM801_TEA575X_BOOL
> > bool "ForteMedia FM801 + TEA5757 tuner"
> > depends on SND_FM801
> > - depends on MEDIA_RADIO_SUPPORT
> > depends on VIDEO_V4L2=y || VIDEO_V4L2=SND_FM801
> > select RADIO_ADAPTERS
> > select RADIO_TEA575X
>
>
> Thanks,
> Mauro


\
 
 \ /
  Last update: 2020-03-21 13:40    [W:0.071 / U:0.268 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site