[lkml]   [2020]   [Mar]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH 0/7] clocksource: Add NVIDIA Tegra186 timers support
From: Thierry Reding <>

This set of patches adds the device tree bindings and a simplified
driver for the timers found on Tegra186 and later SoCs. The driver
itself currently only implements a single watchdog, which in turn
relies on the counter provided by one of the timers. The timers
themselves are not used at the moment because the SoC also has an
architected timer and there's currently no use for the additional
timers provided by this hardware block.

I suggest that patches 1 & 2 go through the clocksource tree, while
I can carry the DTS changes in the Tegra tree for v5.8.


Thierry Reding (7):
dt-bindings: timer: Add bindings for NVIDIA Tegra186 timers
clocksource: Add Tegra186 timers support
arm64: tegra: Order nodes by unit-address on Tegra194
arm64: tegra: Add native timer support on Tegra186
arm64: tegra: Enable native timers on Jetson TX2
arm64: tegra: Add native timer support on Tegra194
arm64: tegra: Enable native timers on Jetson AGX Xavier

.../bindings/timer/nvidia,tegra186-timer.yaml | 55 +++
.../arm64/boot/dts/nvidia/tegra186-p3310.dtsi | 4 +
arch/arm64/boot/dts/nvidia/tegra186.dtsi | 16 +
.../arm64/boot/dts/nvidia/tegra194-p2888.dtsi | 4 +
arch/arm64/boot/dts/nvidia/tegra194.dtsi | 81 ++--
drivers/clocksource/Kconfig | 8 +
drivers/clocksource/Makefile | 1 +
drivers/clocksource/timer-tegra186.c | 377 ++++++++++++++++++
8 files changed, 514 insertions(+), 32 deletions(-)
create mode 100644 Documentation/devicetree/bindings/timer/nvidia,tegra186-timer.yaml
create mode 100644 drivers/clocksource/timer-tegra186.c


 \ /
  Last update: 2020-03-20 14:35    [W:0.081 / U:4.804 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site