lkml.org 
[lkml]   [2020]   [Mar]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 16/42] docs: scsi: convert g_NCR5380.txt to ReST
Date
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
.../scsi/{g_NCR5380.txt => g_NCR5380.rst} | 89 ++++++++++++-------
Documentation/scsi/index.rst | 1 +
Documentation/scsi/scsi-parameters.txt | 6 +-
MAINTAINERS | 2 +-
drivers/scsi/g_NCR5380.c | 2 +-
5 files changed, 63 insertions(+), 37 deletions(-)
rename Documentation/scsi/{g_NCR5380.txt => g_NCR5380.rst} (41%)

diff --git a/Documentation/scsi/g_NCR5380.txt b/Documentation/scsi/g_NCR5380.rst
similarity index 41%
rename from Documentation/scsi/g_NCR5380.txt
rename to Documentation/scsi/g_NCR5380.rst
index 37b1967a00a9..a282059fec43 100644
--- a/Documentation/scsi/g_NCR5380.txt
+++ b/Documentation/scsi/g_NCR5380.rst
@@ -1,7 +1,13 @@
-README file for the Linux g_NCR5380 driver.
+.. SPDX-License-Identifier: GPL-2.0
+.. include:: <isonum.txt>

-(c) 1993 Drew Eckhard
-NCR53c400 extensions (c) 1994,1995,1996 Kevin Lentin
+==========================================
+README file for the Linux g_NCR5380 driver
+==========================================
+
+Copyright |copy| 1993 Drew Eckhard
+
+NCR53c400 extensions Copyright |copy| 1994,1995,1996 Kevin Lentin

This file documents the NCR53c400 extensions by Kevin Lentin and some
enhancements to the NCR5380 core.
@@ -26,43 +32,62 @@ time. More info to come in the future.
This driver works as a module.
When included as a module, parameters can be passed on the insmod/modprobe
command line:
+
+ ============= ===============================================================
irq=xx[,...] the interrupt(s)
base=xx[,...] the port or base address(es) (for port or memory mapped, resp.)
card=xx[,...] card type(s):
- 0 = NCR5380,
- 1 = NCR53C400,
- 2 = NCR53C400A,
- 3 = Domex Technology Corp 3181E (DTC3181E)
- 4 = Hewlett Packard C2502
+
+ == ======================================
+ 0 NCR5380,
+ 1 NCR53C400,
+ 2 NCR53C400A,
+ 3 Domex Technology Corp 3181E (DTC3181E)
+ 4 Hewlett Packard C2502
+ == ======================================
+ ============= ===============================================================

These old-style parameters can support only one card:
- ncr_irq=xx the interrupt
- ncr_addr=xx the port or base address (for port or memory
- mapped, resp.)
- ncr_5380=1 to set up for a NCR5380 board
- ncr_53c400=1 to set up for a NCR53C400 board
+
+ ============= =================================================
+ ncr_irq=xx the interrupt
+ ncr_addr=xx the port or base address (for port or memory
+ mapped, resp.)
+ ncr_5380=1 to set up for a NCR5380 board
+ ncr_53c400=1 to set up for a NCR53C400 board
ncr_53c400a=1 to set up for a NCR53C400A board
- dtc_3181e=1 to set up for a Domex Technology Corp 3181E board
- hp_c2502=1 to set up for a Hewlett Packard C2502 board
-
-E.g. Trantor T130B in its default configuration:
-modprobe g_NCR5380 irq=5 base=0x350 card=1
-or alternatively, using the old syntax,
-modprobe g_NCR5380 ncr_irq=5 ncr_addr=0x350 ncr_53c400=1
-
-E.g. a port mapped NCR5380 board, driver to probe for IRQ:
-modprobe g_NCR5380 base=0x350 card=0
-or alternatively,
-modprobe g_NCR5380 ncr_addr=0x350 ncr_5380=1
-
-E.g. a memory mapped NCR53C400 board with no IRQ:
-modprobe g_NCR5380 irq=255 base=0xc8000 card=1
-or alternatively,
-modprobe g_NCR5380 ncr_irq=255 ncr_addr=0xc8000 ncr_53c400=1
+ dtc_3181e=1 to set up for a Domex Technology Corp 3181E board
+ hp_c2502=1 to set up for a Hewlett Packard C2502 board
+ ============= =================================================
+
+E.g. Trantor T130B in its default configuration::
+
+ modprobe g_NCR5380 irq=5 base=0x350 card=1
+
+or alternatively, using the old syntax::
+
+ modprobe g_NCR5380 ncr_irq=5 ncr_addr=0x350 ncr_53c400=1
+
+E.g. a port mapped NCR5380 board, driver to probe for IRQ::
+
+ modprobe g_NCR5380 base=0x350 card=0
+
+or alternatively::
+
+ modprobe g_NCR5380 ncr_addr=0x350 ncr_5380=1
+
+E.g. a memory mapped NCR53C400 board with no IRQ::
+
+ modprobe g_NCR5380 irq=255 base=0xc8000 card=1
+
+or alternatively::
+
+ modprobe g_NCR5380 ncr_irq=255 ncr_addr=0xc8000 ncr_53c400=1

E.g. two cards, DTC3181 (in non-PnP mode) at 0x240 with no IRQ
-and HP C2502 at 0x300 with IRQ 7:
-modprobe g_NCR5380 irq=0,7 base=0x240,0x300 card=3,4
+and HP C2502 at 0x300 with IRQ 7::
+
+ modprobe g_NCR5380 irq=0,7 base=0x240,0x300 card=3,4

Kevin Lentin
K.Lentin@cs.monash.edu.au
diff --git a/Documentation/scsi/index.rst b/Documentation/scsi/index.rst
index aad8359357e6..4b577c9e804e 100644
--- a/Documentation/scsi/index.rst
+++ b/Documentation/scsi/index.rst
@@ -20,5 +20,6 @@ Linux SCSI Subsystem
dc395x
dpti
FlashPoint
+ g_NCR5380

scsi_transport_srp/figures
diff --git a/Documentation/scsi/scsi-parameters.txt b/Documentation/scsi/scsi-parameters.txt
index 266fd3b2398a..864bbf7f737b 100644
--- a/Documentation/scsi/scsi-parameters.txt
+++ b/Documentation/scsi/scsi-parameters.txt
@@ -57,13 +57,13 @@ parameters may be changed at runtime by the command
See header of drivers/scsi/NCR_D700.c.

ncr5380= [HW,SCSI]
- See Documentation/scsi/g_NCR5380.txt.
+ See Documentation/scsi/g_NCR5380.rst.

ncr53c400= [HW,SCSI]
- See Documentation/scsi/g_NCR5380.txt.
+ See Documentation/scsi/g_NCR5380.rst.

ncr53c400a= [HW,SCSI]
- See Documentation/scsi/g_NCR5380.txt.
+ See Documentation/scsi/g_NCR5380.rst.

ncr53c8xx= [HW,SCSI]

diff --git a/MAINTAINERS b/MAINTAINERS
index 1e2ab816fe66..451a3f67d23a 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -11533,7 +11533,7 @@ M: Finn Thain <fthain@telegraphics.com.au>
M: Michael Schmitz <schmitzmic@gmail.com>
L: linux-scsi@vger.kernel.org
S: Maintained
-F: Documentation/scsi/g_NCR5380.txt
+F: Documentation/scsi/g_NCR5380.rst
F: drivers/scsi/NCR5380.*
F: drivers/scsi/arm/cumana_1.c
F: drivers/scsi/arm/oak.c
diff --git a/drivers/scsi/g_NCR5380.c b/drivers/scsi/g_NCR5380.c
index 2ab774e62e40..2cc676e3df6a 100644
--- a/drivers/scsi/g_NCR5380.c
+++ b/drivers/scsi/g_NCR5380.c
@@ -20,7 +20,7 @@
* Added ISAPNP support for DTC436 adapters,
* Thomas Sailer, sailer@ife.ee.ethz.ch
*
- * See Documentation/scsi/g_NCR5380.txt for more info.
+ * See Documentation/scsi/g_NCR5380.rst for more info.
*/

#include <asm/io.h>
--
2.21.1
\
 
 \ /
  Last update: 2020-03-02 09:19    [W:0.155 / U:1.576 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site