lkml.org 
[lkml]   [2020]   [Mar]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 35/42] docs: scsi: convert smartpqi.txt to ReST
Date
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
Documentation/scsi/index.rst | 1 +
.../scsi/{smartpqi.txt => smartpqi.rst} | 52 +++++++++----------
MAINTAINERS | 2 +-
drivers/scsi/smartpqi/Kconfig | 2 +-
4 files changed, 28 insertions(+), 29 deletions(-)
rename Documentation/scsi/{smartpqi.txt => smartpqi.rst} (67%)

diff --git a/Documentation/scsi/index.rst b/Documentation/scsi/index.rst
index 6805e157b6e8..ff98919faed7 100644
--- a/Documentation/scsi/index.rst
+++ b/Documentation/scsi/index.rst
@@ -39,5 +39,6 @@ Linux SCSI Subsystem
scsi-parameters
scsi
sd-parameters
+ smartpqi

scsi_transport_srp/figures
diff --git a/Documentation/scsi/smartpqi.txt b/Documentation/scsi/smartpqi.rst
similarity index 67%
rename from Documentation/scsi/smartpqi.txt
rename to Documentation/scsi/smartpqi.rst
index df129f55ace5..a7de27352c6f 100644
--- a/Documentation/scsi/smartpqi.txt
+++ b/Documentation/scsi/smartpqi.rst
@@ -1,6 +1,8 @@
+.. SPDX-License-Identifier: GPL-2.0

+=====================================
SMARTPQI - Microsemi Smart PQI Driver
------------------------------------------
+=====================================

This file describes the smartpqi SCSI driver for Microsemi
(http://www.microsemi.com) PQI controllers. The smartpqi driver
@@ -16,20 +18,21 @@ For Microsemi smartpqi controller support, enable the smartpqi driver
when configuring the kernel.

For more information on the PQI Queuing Interface, please see:
-http://www.t10.org/drafts.htm
-http://www.t10.org/members/w_pqi2.htm

-Supported devices:
-------------------
+- http://www.t10.org/drafts.htm
+- http://www.t10.org/members/w_pqi2.htm
+
+Supported devices
+=================
<Controller names to be added as they become publicly available.>

smartpqi specific entries in /sys
------------------------------
+=================================

- smartpqi host attributes:
- -------------------------
- /sys/class/scsi_host/host*/rescan
- /sys/class/scsi_host/host*/driver_version
+smartpqi host attributes
+------------------------
+ - /sys/class/scsi_host/host*/rescan
+ - /sys/class/scsi_host/host*/driver_version

The host rescan attribute is a write only attribute. Writing to this
attribute will trigger the driver to scan for new, changed, or removed
@@ -37,12 +40,13 @@ smartpqi specific entries in /sys

The version attribute is read-only and will return the driver version
and the controller firmware version.
- For example:
+ For example::
+
driver: 0.9.13-370
firmware: 0.01-522

- smartpqi sas device attributes
- ------------------------------
+smartpqi sas device attributes
+------------------------------
HBA devices are added to the SAS transport layer. These attributes are
automatically added by the SAS transport layer.

@@ -50,31 +54,25 @@ smartpqi specific entries in /sys
/sys/class/sas_device/end_device-X:X/enclosure_identifier
/sys/class/sas_device/end_device-X:X/scsi_target_id

-smartpqi specific ioctls:
--------------------------
+smartpqi specific ioctls
+========================

For compatibility with applications written for the cciss protocol.

- CCISS_DEREGDISK
- CCISS_REGNEWDISK
- CCISS_REGNEWD
-
- The above three ioctls all do exactly the same thing, which is to cause the driver
- to rescan for new devices. This does exactly the same thing as writing to the
- smartpqi specific host "rescan" attribute.
+ CCISS_DEREGDISK, CCISS_REGNEWDISK, CCISS_REGNEWD
+ The above three ioctls all do exactly the same thing, which is to cause the driver
+ to rescan for new devices. This does exactly the same thing as writing to the
+ smartpqi specific host "rescan" attribute.

CCISS_GETPCIINFO
-
Returns PCI domain, bus, device and function and "board ID" (PCI subsystem ID).

CCISS_GETDRIVVER
+ Returns driver version in three bytes encoded as::

- Returns driver version in three bytes encoded as:
- (DRIVER_MAJOR << 28) | (DRIVER_MINOR << 24) | (DRIVER_RELEASE << 16) | DRIVER_REVISION;
+ (DRIVER_MAJOR << 28) | (DRIVER_MINOR << 24) | (DRIVER_RELEASE << 16) | DRIVER_REVISION;

CCISS_PASSTHRU
-
Allows "BMIC" and "CISS" commands to be passed through to the Smart Storage Array.
These are used extensively by the SSA Array Configuration Utility, SNMP storage
agents, etc.
-
diff --git a/MAINTAINERS b/MAINTAINERS
index 776de9c5b404..f27c24d82c0f 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -11153,7 +11153,7 @@ F: drivers/scsi/smartpqi/Kconfig
F: drivers/scsi/smartpqi/Makefile
F: include/linux/cciss*.h
F: include/uapi/linux/cciss*.h
-F: Documentation/scsi/smartpqi.txt
+F: Documentation/scsi/smartpqi.rst

MICROSEMI ETHERNET SWITCH DRIVER
M: Alexandre Belloni <alexandre.belloni@bootlin.com>
diff --git a/drivers/scsi/smartpqi/Kconfig b/drivers/scsi/smartpqi/Kconfig
index bc6506884e3b..d3311c014863 100644
--- a/drivers/scsi/smartpqi/Kconfig
+++ b/drivers/scsi/smartpqi/Kconfig
@@ -53,4 +53,4 @@ config SCSI_SMARTPQI
Note: the aacraid driver will not manage a smartpqi
controller. You need to enable smartpqi for smartpqi
controllers. For more information, please see
- Documentation/scsi/smartpqi.txt
+ Documentation/scsi/smartpqi.rst
--
2.21.1
\
 
 \ /
  Last update: 2020-03-02 09:17    [W:0.487 / U:2.052 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site