lkml.org 
[lkml]   [2020]   [Mar]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 16/42] docs: scsi: convert g_NCR5380.txt to ReST
On Mon, 2 Mar 2020, Mauro Carvalho Chehab wrote:

> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Acked-by: Finn Thain <fthain@telegraphics.com.au>

> ---
> .../scsi/{g_NCR5380.txt => g_NCR5380.rst} | 89 ++++++++++++-------
> Documentation/scsi/index.rst | 1 +
> Documentation/scsi/scsi-parameters.txt | 6 +-
> MAINTAINERS | 2 +-
> drivers/scsi/g_NCR5380.c | 2 +-
> 5 files changed, 63 insertions(+), 37 deletions(-)
> rename Documentation/scsi/{g_NCR5380.txt => g_NCR5380.rst} (41%)
>
> diff --git a/Documentation/scsi/g_NCR5380.txt b/Documentation/scsi/g_NCR5380.rst
> similarity index 41%
> rename from Documentation/scsi/g_NCR5380.txt
> rename to Documentation/scsi/g_NCR5380.rst
> index 37b1967a00a9..a282059fec43 100644
> --- a/Documentation/scsi/g_NCR5380.txt
> +++ b/Documentation/scsi/g_NCR5380.rst
> @@ -1,7 +1,13 @@
> -README file for the Linux g_NCR5380 driver.
> +.. SPDX-License-Identifier: GPL-2.0
> +.. include:: <isonum.txt>
>
> -(c) 1993 Drew Eckhard
> -NCR53c400 extensions (c) 1994,1995,1996 Kevin Lentin
> +==========================================
> +README file for the Linux g_NCR5380 driver
> +==========================================
> +
> +Copyright |copy| 1993 Drew Eckhard
> +
> +NCR53c400 extensions Copyright |copy| 1994,1995,1996 Kevin Lentin
>
> This file documents the NCR53c400 extensions by Kevin Lentin and some
> enhancements to the NCR5380 core.
> @@ -26,43 +32,62 @@ time. More info to come in the future.
> This driver works as a module.
> When included as a module, parameters can be passed on the insmod/modprobe
> command line:
> +
> + ============= ===============================================================
> irq=xx[,...] the interrupt(s)
> base=xx[,...] the port or base address(es) (for port or memory mapped, resp.)
> card=xx[,...] card type(s):
> - 0 = NCR5380,
> - 1 = NCR53C400,
> - 2 = NCR53C400A,
> - 3 = Domex Technology Corp 3181E (DTC3181E)
> - 4 = Hewlett Packard C2502
> +
> + == ======================================
> + 0 NCR5380,
> + 1 NCR53C400,
> + 2 NCR53C400A,
> + 3 Domex Technology Corp 3181E (DTC3181E)
> + 4 Hewlett Packard C2502
> + == ======================================
> + ============= ===============================================================
>
> These old-style parameters can support only one card:
> - ncr_irq=xx the interrupt
> - ncr_addr=xx the port or base address (for port or memory
> - mapped, resp.)
> - ncr_5380=1 to set up for a NCR5380 board
> - ncr_53c400=1 to set up for a NCR53C400 board
> +
> + ============= =================================================
> + ncr_irq=xx the interrupt
> + ncr_addr=xx the port or base address (for port or memory
> + mapped, resp.)
> + ncr_5380=1 to set up for a NCR5380 board
> + ncr_53c400=1 to set up for a NCR53C400 board
> ncr_53c400a=1 to set up for a NCR53C400A board
> - dtc_3181e=1 to set up for a Domex Technology Corp 3181E board
> - hp_c2502=1 to set up for a Hewlett Packard C2502 board
> -
> -E.g. Trantor T130B in its default configuration:
> -modprobe g_NCR5380 irq=5 base=0x350 card=1
> -or alternatively, using the old syntax,
> -modprobe g_NCR5380 ncr_irq=5 ncr_addr=0x350 ncr_53c400=1
> -
> -E.g. a port mapped NCR5380 board, driver to probe for IRQ:
> -modprobe g_NCR5380 base=0x350 card=0
> -or alternatively,
> -modprobe g_NCR5380 ncr_addr=0x350 ncr_5380=1
> -
> -E.g. a memory mapped NCR53C400 board with no IRQ:
> -modprobe g_NCR5380 irq=255 base=0xc8000 card=1
> -or alternatively,
> -modprobe g_NCR5380 ncr_irq=255 ncr_addr=0xc8000 ncr_53c400=1
> + dtc_3181e=1 to set up for a Domex Technology Corp 3181E board
> + hp_c2502=1 to set up for a Hewlett Packard C2502 board
> + ============= =================================================
> +
> +E.g. Trantor T130B in its default configuration::
> +
> + modprobe g_NCR5380 irq=5 base=0x350 card=1
> +
> +or alternatively, using the old syntax::
> +
> + modprobe g_NCR5380 ncr_irq=5 ncr_addr=0x350 ncr_53c400=1
> +
> +E.g. a port mapped NCR5380 board, driver to probe for IRQ::
> +
> + modprobe g_NCR5380 base=0x350 card=0
> +
> +or alternatively::
> +
> + modprobe g_NCR5380 ncr_addr=0x350 ncr_5380=1
> +
> +E.g. a memory mapped NCR53C400 board with no IRQ::
> +
> + modprobe g_NCR5380 irq=255 base=0xc8000 card=1
> +
> +or alternatively::
> +
> + modprobe g_NCR5380 ncr_irq=255 ncr_addr=0xc8000 ncr_53c400=1
>
> E.g. two cards, DTC3181 (in non-PnP mode) at 0x240 with no IRQ
> -and HP C2502 at 0x300 with IRQ 7:
> -modprobe g_NCR5380 irq=0,7 base=0x240,0x300 card=3,4
> +and HP C2502 at 0x300 with IRQ 7::
> +
> + modprobe g_NCR5380 irq=0,7 base=0x240,0x300 card=3,4
>
> Kevin Lentin
> K.Lentin@cs.monash.edu.au
> diff --git a/Documentation/scsi/index.rst b/Documentation/scsi/index.rst
> index aad8359357e6..4b577c9e804e 100644
> --- a/Documentation/scsi/index.rst
> +++ b/Documentation/scsi/index.rst
> @@ -20,5 +20,6 @@ Linux SCSI Subsystem
> dc395x
> dpti
> FlashPoint
> + g_NCR5380
>
> scsi_transport_srp/figures
> diff --git a/Documentation/scsi/scsi-parameters.txt b/Documentation/scsi/scsi-parameters.txt
> index 266fd3b2398a..864bbf7f737b 100644
> --- a/Documentation/scsi/scsi-parameters.txt
> +++ b/Documentation/scsi/scsi-parameters.txt
> @@ -57,13 +57,13 @@ parameters may be changed at runtime by the command
> See header of drivers/scsi/NCR_D700.c.
>
> ncr5380= [HW,SCSI]
> - See Documentation/scsi/g_NCR5380.txt.
> + See Documentation/scsi/g_NCR5380.rst.
>
> ncr53c400= [HW,SCSI]
> - See Documentation/scsi/g_NCR5380.txt.
> + See Documentation/scsi/g_NCR5380.rst.
>
> ncr53c400a= [HW,SCSI]
> - See Documentation/scsi/g_NCR5380.txt.
> + See Documentation/scsi/g_NCR5380.rst.
>
> ncr53c8xx= [HW,SCSI]
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 1e2ab816fe66..451a3f67d23a 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -11533,7 +11533,7 @@ M: Finn Thain <fthain@telegraphics.com.au>
> M: Michael Schmitz <schmitzmic@gmail.com>
> L: linux-scsi@vger.kernel.org
> S: Maintained
> -F: Documentation/scsi/g_NCR5380.txt
> +F: Documentation/scsi/g_NCR5380.rst
> F: drivers/scsi/NCR5380.*
> F: drivers/scsi/arm/cumana_1.c
> F: drivers/scsi/arm/oak.c
> diff --git a/drivers/scsi/g_NCR5380.c b/drivers/scsi/g_NCR5380.c
> index 2ab774e62e40..2cc676e3df6a 100644
> --- a/drivers/scsi/g_NCR5380.c
> +++ b/drivers/scsi/g_NCR5380.c
> @@ -20,7 +20,7 @@
> * Added ISAPNP support for DTC436 adapters,
> * Thomas Sailer, sailer@ife.ee.ethz.ch
> *
> - * See Documentation/scsi/g_NCR5380.txt for more info.
> + * See Documentation/scsi/g_NCR5380.rst for more info.
> */
>
> #include <asm/io.h>
>

\
 
 \ /
  Last update: 2020-03-03 01:22    [W:0.232 / U:2.236 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site