lkml.org 
[lkml]   [2020]   [Mar]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v5 10/13] powerpc/ptrace: split out ADV_DEBUG_REGS related functions.
Date
Christophe Leroy <christophe.leroy@c-s.fr> writes:
> Move ADV_DEBUG_REGS functions out of ptrace.c, into
> ptrace-adv.c and ptrace-noadv.c
>
> Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
> ---
> v4: Leave hw_breakpoint.h for ptrace.c
> ---
> arch/powerpc/kernel/ptrace/Makefile | 4 +
> arch/powerpc/kernel/ptrace/ptrace-adv.c | 468 ++++++++++++++++
> arch/powerpc/kernel/ptrace/ptrace-decl.h | 5 +
> arch/powerpc/kernel/ptrace/ptrace-noadv.c | 236 ++++++++
> arch/powerpc/kernel/ptrace/ptrace.c | 650 ----------------------
> 5 files changed, 713 insertions(+), 650 deletions(-)
> create mode 100644 arch/powerpc/kernel/ptrace/ptrace-adv.c
> create mode 100644 arch/powerpc/kernel/ptrace/ptrace-noadv.c

This is somehow breaking the ptrace-hwbreak selftest on Power8:

test: ptrace-hwbreak
tags: git_version:v5.6-rc6-892-g7a285a6067d6
PTRACE_SET_DEBUGREG, WO, len: 1: Ok
PTRACE_SET_DEBUGREG, WO, len: 2: Ok
PTRACE_SET_DEBUGREG, WO, len: 4: Ok
PTRACE_SET_DEBUGREG, WO, len: 8: Ok
PTRACE_SET_DEBUGREG, RO, len: 1: Ok
PTRACE_SET_DEBUGREG, RO, len: 2: Ok
PTRACE_SET_DEBUGREG, RO, len: 4: Ok
PTRACE_SET_DEBUGREG, RO, len: 8: Ok
PTRACE_SET_DEBUGREG, RW, len: 1: Ok
PTRACE_SET_DEBUGREG, RW, len: 2: Ok
PTRACE_SET_DEBUGREG, RW, len: 4: Ok
PTRACE_SET_DEBUGREG, RW, len: 8: Ok
PPC_PTRACE_SETHWDEBUG, MODE_EXACT, WO, len: 1: Ok
PPC_PTRACE_SETHWDEBUG, MODE_EXACT, RO, len: 1: Ok
PPC_PTRACE_SETHWDEBUG, MODE_EXACT, RW, len: 1: Ok
PPC_PTRACE_SETHWDEBUG, MODE_RANGE, DW ALIGNED, WO, len: 6: Ok
PPC_PTRACE_SETHWDEBUG, MODE_RANGE, DW ALIGNED, RO, len: 6: Ok
PPC_PTRACE_SETHWDEBUG, MODE_RANGE, DW ALIGNED, RW, len: 6: Ok
PPC_PTRACE_SETHWDEBUG, MODE_RANGE, DW UNALIGNED, WO, len: 6: Ok
PPC_PTRACE_SETHWDEBUG, MODE_RANGE, DW UNALIGNED, RO, len: 6: Fail
failure: ptrace-hwbreak

I haven't had time to work out why yet.

cheers

> diff --git a/arch/powerpc/kernel/ptrace/Makefile b/arch/powerpc/kernel/ptrace/Makefile
> index 7addc5994bb9..e9d97c2d063e 100644
> --- a/arch/powerpc/kernel/ptrace/Makefile
> +++ b/arch/powerpc/kernel/ptrace/Makefile
> @@ -14,3 +14,7 @@ endif
> obj-$(CONFIG_ALTIVEC) += ptrace-altivec.o
> obj-$(CONFIG_SPE) += ptrace-spe.o
> obj-$(CONFIG_PPC_TRANSACTIONAL_MEM) += ptrace-tm.o
> +obj-$(CONFIG_PPC_ADV_DEBUG_REGS) += ptrace-adv.o
> +ifneq ($(CONFIG_PPC_ADV_DEBUG_REGS),y)
> +obj-y += ptrace-noadv.o
> +endif
> diff --git a/arch/powerpc/kernel/ptrace/ptrace-adv.c b/arch/powerpc/kernel/ptrace/ptrace-adv.c
> new file mode 100644
> index 000000000000..eebcd41edc3d
> --- /dev/null
> +++ b/arch/powerpc/kernel/ptrace/ptrace-adv.c
> @@ -0,0 +1,468 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +
> +#include <linux/regset.h>
> +#include <linux/hw_breakpoint.h>
> +
> +#include "ptrace-decl.h"
> +
> +void user_enable_single_step(struct task_struct *task)
> +{
> + struct pt_regs *regs = task->thread.regs;
> +
> + if (regs != NULL) {
> + task->thread.debug.dbcr0 &= ~DBCR0_BT;
> + task->thread.debug.dbcr0 |= DBCR0_IDM | DBCR0_IC;
> + regs->msr |= MSR_DE;
> + }
> + set_tsk_thread_flag(task, TIF_SINGLESTEP);
> +}
> +
> +void user_enable_block_step(struct task_struct *task)
> +{
> + struct pt_regs *regs = task->thread.regs;
> +
> + if (regs != NULL) {
> + task->thread.debug.dbcr0 &= ~DBCR0_IC;
> + task->thread.debug.dbcr0 = DBCR0_IDM | DBCR0_BT;
> + regs->msr |= MSR_DE;
> + }
> + set_tsk_thread_flag(task, TIF_SINGLESTEP);
> +}
> +
> +void user_disable_single_step(struct task_struct *task)
> +{
> + struct pt_regs *regs = task->thread.regs;
> +
> + if (regs != NULL) {
> + /*
> + * The logic to disable single stepping should be as
> + * simple as turning off the Instruction Complete flag.
> + * And, after doing so, if all debug flags are off, turn
> + * off DBCR0(IDM) and MSR(DE) .... Torez
> + */
> + task->thread.debug.dbcr0 &= ~(DBCR0_IC | DBCR0_BT);
> + /*
> + * Test to see if any of the DBCR_ACTIVE_EVENTS bits are set.
> + */
> + if (!DBCR_ACTIVE_EVENTS(task->thread.debug.dbcr0,
> + task->thread.debug.dbcr1)) {
> + /*
> + * All debug events were off.....
> + */
> + task->thread.debug.dbcr0 &= ~DBCR0_IDM;
> + regs->msr &= ~MSR_DE;
> + }
> + }
> + clear_tsk_thread_flag(task, TIF_SINGLESTEP);
> +}
> +
> +int ptrace_set_debugreg(struct task_struct *task, unsigned long addr, unsigned long data)
> +{
> +#ifdef CONFIG_HAVE_HW_BREAKPOINT
> + int ret;
> + struct thread_struct *thread = &task->thread;
> + struct perf_event *bp;
> + struct perf_event_attr attr;
> +#endif /* CONFIG_HAVE_HW_BREAKPOINT */
> +
> + /* For ppc64 we support one DABR and no IABR's at the moment (ppc64).
> + * For embedded processors we support one DAC and no IAC's at the
> + * moment.
> + */
> + if (addr > 0)
> + return -EINVAL;
> +
> + /* The bottom 3 bits in dabr are flags */
> + if ((data & ~0x7UL) >= TASK_SIZE)
> + return -EIO;
> +
> + /* As described above, it was assumed 3 bits were passed with the data
> + * address, but we will assume only the mode bits will be passed
> + * as to not cause alignment restrictions for DAC-based processors.
> + */
> +
> + /* DAC's hold the whole address without any mode flags */
> + task->thread.debug.dac1 = data & ~0x3UL;
> +
> + if (task->thread.debug.dac1 == 0) {
> + dbcr_dac(task) &= ~(DBCR_DAC1R | DBCR_DAC1W);
> + if (!DBCR_ACTIVE_EVENTS(task->thread.debug.dbcr0,
> + task->thread.debug.dbcr1)) {
> + task->thread.regs->msr &= ~MSR_DE;
> + task->thread.debug.dbcr0 &= ~DBCR0_IDM;
> + }
> + return 0;
> + }
> +
> + /* Read or Write bits must be set */
> +
> + if (!(data & 0x3UL))
> + return -EINVAL;
> +
> + /* Set the Internal Debugging flag (IDM bit 1) for the DBCR0 register */
> + task->thread.debug.dbcr0 |= DBCR0_IDM;
> +
> + /* Check for write and read flags and set DBCR0 accordingly */
> + dbcr_dac(task) &= ~(DBCR_DAC1R | DBCR_DAC1W);
> + if (data & 0x1UL)
> + dbcr_dac(task) |= DBCR_DAC1R;
> + if (data & 0x2UL)
> + dbcr_dac(task) |= DBCR_DAC1W;
> + task->thread.regs->msr |= MSR_DE;
> + return 0;
> +}
> +
> +static long set_instruction_bp(struct task_struct *child,
> + struct ppc_hw_breakpoint *bp_info)
> +{
> + int slot;
> + int slot1_in_use = ((child->thread.debug.dbcr0 & DBCR0_IAC1) != 0);
> + int slot2_in_use = ((child->thread.debug.dbcr0 & DBCR0_IAC2) != 0);
> + int slot3_in_use = ((child->thread.debug.dbcr0 & DBCR0_IAC3) != 0);
> + int slot4_in_use = ((child->thread.debug.dbcr0 & DBCR0_IAC4) != 0);
> +
> + if (dbcr_iac_range(child) & DBCR_IAC12MODE)
> + slot2_in_use = 1;
> + if (dbcr_iac_range(child) & DBCR_IAC34MODE)
> + slot4_in_use = 1;
> +
> + if (bp_info->addr >= TASK_SIZE)
> + return -EIO;
> +
> + if (bp_info->addr_mode != PPC_BREAKPOINT_MODE_EXACT) {
> + /* Make sure range is valid. */
> + if (bp_info->addr2 >= TASK_SIZE)
> + return -EIO;
> +
> + /* We need a pair of IAC regsisters */
> + if (!slot1_in_use && !slot2_in_use) {
> + slot = 1;
> + child->thread.debug.iac1 = bp_info->addr;
> + child->thread.debug.iac2 = bp_info->addr2;
> + child->thread.debug.dbcr0 |= DBCR0_IAC1;
> + if (bp_info->addr_mode ==
> + PPC_BREAKPOINT_MODE_RANGE_EXCLUSIVE)
> + dbcr_iac_range(child) |= DBCR_IAC12X;
> + else
> + dbcr_iac_range(child) |= DBCR_IAC12I;
> +#if CONFIG_PPC_ADV_DEBUG_IACS > 2
> + } else if ((!slot3_in_use) && (!slot4_in_use)) {
> + slot = 3;
> + child->thread.debug.iac3 = bp_info->addr;
> + child->thread.debug.iac4 = bp_info->addr2;
> + child->thread.debug.dbcr0 |= DBCR0_IAC3;
> + if (bp_info->addr_mode ==
> + PPC_BREAKPOINT_MODE_RANGE_EXCLUSIVE)
> + dbcr_iac_range(child) |= DBCR_IAC34X;
> + else
> + dbcr_iac_range(child) |= DBCR_IAC34I;
> +#endif
> + } else {
> + return -ENOSPC;
> + }
> + } else {
> + /* We only need one. If possible leave a pair free in
> + * case a range is needed later
> + */
> + if (!slot1_in_use) {
> + /*
> + * Don't use iac1 if iac1-iac2 are free and either
> + * iac3 or iac4 (but not both) are free
> + */
> + if (slot2_in_use || slot3_in_use == slot4_in_use) {
> + slot = 1;
> + child->thread.debug.iac1 = bp_info->addr;
> + child->thread.debug.dbcr0 |= DBCR0_IAC1;
> + goto out;
> + }
> + }
> + if (!slot2_in_use) {
> + slot = 2;
> + child->thread.debug.iac2 = bp_info->addr;
> + child->thread.debug.dbcr0 |= DBCR0_IAC2;
> +#if CONFIG_PPC_ADV_DEBUG_IACS > 2
> + } else if (!slot3_in_use) {
> + slot = 3;
> + child->thread.debug.iac3 = bp_info->addr;
> + child->thread.debug.dbcr0 |= DBCR0_IAC3;
> + } else if (!slot4_in_use) {
> + slot = 4;
> + child->thread.debug.iac4 = bp_info->addr;
> + child->thread.debug.dbcr0 |= DBCR0_IAC4;
> +#endif
> + } else {
> + return -ENOSPC;
> + }
> + }
> +out:
> + child->thread.debug.dbcr0 |= DBCR0_IDM;
> + child->thread.regs->msr |= MSR_DE;
> +
> + return slot;
> +}
> +
> +static int del_instruction_bp(struct task_struct *child, int slot)
> +{
> + switch (slot) {
> + case 1:
> + if ((child->thread.debug.dbcr0 & DBCR0_IAC1) == 0)
> + return -ENOENT;
> +
> + if (dbcr_iac_range(child) & DBCR_IAC12MODE) {
> + /* address range - clear slots 1 & 2 */
> + child->thread.debug.iac2 = 0;
> + dbcr_iac_range(child) &= ~DBCR_IAC12MODE;
> + }
> + child->thread.debug.iac1 = 0;
> + child->thread.debug.dbcr0 &= ~DBCR0_IAC1;
> + break;
> + case 2:
> + if ((child->thread.debug.dbcr0 & DBCR0_IAC2) == 0)
> + return -ENOENT;
> +
> + if (dbcr_iac_range(child) & DBCR_IAC12MODE)
> + /* used in a range */
> + return -EINVAL;
> + child->thread.debug.iac2 = 0;
> + child->thread.debug.dbcr0 &= ~DBCR0_IAC2;
> + break;
> +#if CONFIG_PPC_ADV_DEBUG_IACS > 2
> + case 3:
> + if ((child->thread.debug.dbcr0 & DBCR0_IAC3) == 0)
> + return -ENOENT;
> +
> + if (dbcr_iac_range(child) & DBCR_IAC34MODE) {
> + /* address range - clear slots 3 & 4 */
> + child->thread.debug.iac4 = 0;
> + dbcr_iac_range(child) &= ~DBCR_IAC34MODE;
> + }
> + child->thread.debug.iac3 = 0;
> + child->thread.debug.dbcr0 &= ~DBCR0_IAC3;
> + break;
> + case 4:
> + if ((child->thread.debug.dbcr0 & DBCR0_IAC4) == 0)
> + return -ENOENT;
> +
> + if (dbcr_iac_range(child) & DBCR_IAC34MODE)
> + /* Used in a range */
> + return -EINVAL;
> + child->thread.debug.iac4 = 0;
> + child->thread.debug.dbcr0 &= ~DBCR0_IAC4;
> + break;
> +#endif
> + default:
> + return -EINVAL;
> + }
> + return 0;
> +}
> +
> +static int set_dac(struct task_struct *child, struct ppc_hw_breakpoint *bp_info)
> +{
> + int byte_enable =
> + (bp_info->condition_mode >> PPC_BREAKPOINT_CONDITION_BE_SHIFT)
> + & 0xf;
> + int condition_mode =
> + bp_info->condition_mode & PPC_BREAKPOINT_CONDITION_MODE;
> + int slot;
> +
> + if (byte_enable && condition_mode == 0)
> + return -EINVAL;
> +
> + if (bp_info->addr >= TASK_SIZE)
> + return -EIO;
> +
> + if ((dbcr_dac(child) & (DBCR_DAC1R | DBCR_DAC1W)) == 0) {
> + slot = 1;
> + if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_READ)
> + dbcr_dac(child) |= DBCR_DAC1R;
> + if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_WRITE)
> + dbcr_dac(child) |= DBCR_DAC1W;
> + child->thread.debug.dac1 = (unsigned long)bp_info->addr;
> +#if CONFIG_PPC_ADV_DEBUG_DVCS > 0
> + if (byte_enable) {
> + child->thread.debug.dvc1 =
> + (unsigned long)bp_info->condition_value;
> + child->thread.debug.dbcr2 |=
> + ((byte_enable << DBCR2_DVC1BE_SHIFT) |
> + (condition_mode << DBCR2_DVC1M_SHIFT));
> + }
> +#endif
> +#ifdef CONFIG_PPC_ADV_DEBUG_DAC_RANGE
> + } else if (child->thread.debug.dbcr2 & DBCR2_DAC12MODE) {
> + /* Both dac1 and dac2 are part of a range */
> + return -ENOSPC;
> +#endif
> + } else if ((dbcr_dac(child) & (DBCR_DAC2R | DBCR_DAC2W)) == 0) {
> + slot = 2;
> + if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_READ)
> + dbcr_dac(child) |= DBCR_DAC2R;
> + if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_WRITE)
> + dbcr_dac(child) |= DBCR_DAC2W;
> + child->thread.debug.dac2 = (unsigned long)bp_info->addr;
> +#if CONFIG_PPC_ADV_DEBUG_DVCS > 0
> + if (byte_enable) {
> + child->thread.debug.dvc2 =
> + (unsigned long)bp_info->condition_value;
> + child->thread.debug.dbcr2 |=
> + ((byte_enable << DBCR2_DVC2BE_SHIFT) |
> + (condition_mode << DBCR2_DVC2M_SHIFT));
> + }
> +#endif
> + } else {
> + return -ENOSPC;
> + }
> + child->thread.debug.dbcr0 |= DBCR0_IDM;
> + child->thread.regs->msr |= MSR_DE;
> +
> + return slot + 4;
> +}
> +
> +static int del_dac(struct task_struct *child, int slot)
> +{
> + if (slot == 1) {
> + if ((dbcr_dac(child) & (DBCR_DAC1R | DBCR_DAC1W)) == 0)
> + return -ENOENT;
> +
> + child->thread.debug.dac1 = 0;
> + dbcr_dac(child) &= ~(DBCR_DAC1R | DBCR_DAC1W);
> +#ifdef CONFIG_PPC_ADV_DEBUG_DAC_RANGE
> + if (child->thread.debug.dbcr2 & DBCR2_DAC12MODE) {
> + child->thread.debug.dac2 = 0;
> + child->thread.debug.dbcr2 &= ~DBCR2_DAC12MODE;
> + }
> + child->thread.debug.dbcr2 &= ~(DBCR2_DVC1M | DBCR2_DVC1BE);
> +#endif
> +#if CONFIG_PPC_ADV_DEBUG_DVCS > 0
> + child->thread.debug.dvc1 = 0;
> +#endif
> + } else if (slot == 2) {
> + if ((dbcr_dac(child) & (DBCR_DAC2R | DBCR_DAC2W)) == 0)
> + return -ENOENT;
> +
> +#ifdef CONFIG_PPC_ADV_DEBUG_DAC_RANGE
> + if (child->thread.debug.dbcr2 & DBCR2_DAC12MODE)
> + /* Part of a range */
> + return -EINVAL;
> + child->thread.debug.dbcr2 &= ~(DBCR2_DVC2M | DBCR2_DVC2BE);
> +#endif
> +#if CONFIG_PPC_ADV_DEBUG_DVCS > 0
> + child->thread.debug.dvc2 = 0;
> +#endif
> + child->thread.debug.dac2 = 0;
> + dbcr_dac(child) &= ~(DBCR_DAC2R | DBCR_DAC2W);
> + } else {
> + return -EINVAL;
> + }
> +
> + return 0;
> +}
> +
> +#ifdef CONFIG_PPC_ADV_DEBUG_DAC_RANGE
> +static int set_dac_range(struct task_struct *child,
> + struct ppc_hw_breakpoint *bp_info)
> +{
> + int mode = bp_info->addr_mode & PPC_BREAKPOINT_MODE_MASK;
> +
> + /* We don't allow range watchpoints to be used with DVC */
> + if (bp_info->condition_mode)
> + return -EINVAL;
> +
> + /*
> + * Best effort to verify the address range. The user/supervisor bits
> + * prevent trapping in kernel space, but let's fail on an obvious bad
> + * range. The simple test on the mask is not fool-proof, and any
> + * exclusive range will spill over into kernel space.
> + */
> + if (bp_info->addr >= TASK_SIZE)
> + return -EIO;
> + if (mode == PPC_BREAKPOINT_MODE_MASK) {
> + /*
> + * dac2 is a bitmask. Don't allow a mask that makes a
> + * kernel space address from a valid dac1 value
> + */
> + if (~((unsigned long)bp_info->addr2) >= TASK_SIZE)
> + return -EIO;
> + } else {
> + /*
> + * For range breakpoints, addr2 must also be a valid address
> + */
> + if (bp_info->addr2 >= TASK_SIZE)
> + return -EIO;
> + }
> +
> + if (child->thread.debug.dbcr0 &
> + (DBCR0_DAC1R | DBCR0_DAC1W | DBCR0_DAC2R | DBCR0_DAC2W))
> + return -ENOSPC;
> +
> + if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_READ)
> + child->thread.debug.dbcr0 |= (DBCR0_DAC1R | DBCR0_IDM);
> + if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_WRITE)
> + child->thread.debug.dbcr0 |= (DBCR0_DAC1W | DBCR0_IDM);
> + child->thread.debug.dac1 = bp_info->addr;
> + child->thread.debug.dac2 = bp_info->addr2;
> + if (mode == PPC_BREAKPOINT_MODE_RANGE_INCLUSIVE)
> + child->thread.debug.dbcr2 |= DBCR2_DAC12M;
> + else if (mode == PPC_BREAKPOINT_MODE_RANGE_EXCLUSIVE)
> + child->thread.debug.dbcr2 |= DBCR2_DAC12MX;
> + else /* PPC_BREAKPOINT_MODE_MASK */
> + child->thread.debug.dbcr2 |= DBCR2_DAC12MM;
> + child->thread.regs->msr |= MSR_DE;
> +
> + return 5;
> +}
> +#endif /* CONFIG_PPC_ADV_DEBUG_DAC_RANGE */
> +
> +long ppc_set_hwdebug(struct task_struct *child, struct ppc_hw_breakpoint *bp_info)
> +{
> + if (bp_info->version != 1)
> + return -ENOTSUPP;
> + /*
> + * Check for invalid flags and combinations
> + */
> + if (bp_info->trigger_type == 0 ||
> + (bp_info->trigger_type & ~(PPC_BREAKPOINT_TRIGGER_EXECUTE |
> + PPC_BREAKPOINT_TRIGGER_RW)) ||
> + (bp_info->addr_mode & ~PPC_BREAKPOINT_MODE_MASK) ||
> + (bp_info->condition_mode &
> + ~(PPC_BREAKPOINT_CONDITION_MODE |
> + PPC_BREAKPOINT_CONDITION_BE_ALL)))
> + return -EINVAL;
> +#if CONFIG_PPC_ADV_DEBUG_DVCS == 0
> + if (bp_info->condition_mode != PPC_BREAKPOINT_CONDITION_NONE)
> + return -EINVAL;
> +#endif
> +
> + if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_EXECUTE) {
> + if (bp_info->trigger_type != PPC_BREAKPOINT_TRIGGER_EXECUTE ||
> + bp_info->condition_mode != PPC_BREAKPOINT_CONDITION_NONE)
> + return -EINVAL;
> + return set_instruction_bp(child, bp_info);
> + }
> + if (bp_info->addr_mode == PPC_BREAKPOINT_MODE_EXACT)
> + return set_dac(child, bp_info);
> +
> +#ifdef CONFIG_PPC_ADV_DEBUG_DAC_RANGE
> + return set_dac_range(child, bp_info);
> +#else
> + return -EINVAL;
> +#endif
> +}
> +
> +long ppc_del_hwdebug(struct task_struct *child, long data)
> +{
> + int rc;
> +
> + if (data <= 4)
> + rc = del_instruction_bp(child, (int)data);
> + else
> + rc = del_dac(child, (int)data - 4);
> +
> + if (!rc) {
> + if (!DBCR_ACTIVE_EVENTS(child->thread.debug.dbcr0,
> + child->thread.debug.dbcr1)) {
> + child->thread.debug.dbcr0 &= ~DBCR0_IDM;
> + child->thread.regs->msr &= ~MSR_DE;
> + }
> + }
> + return rc;
> +}
> diff --git a/arch/powerpc/kernel/ptrace/ptrace-decl.h b/arch/powerpc/kernel/ptrace/ptrace-decl.h
> index e12f6615fc1d..bdba09a87aea 100644
> --- a/arch/powerpc/kernel/ptrace/ptrace-decl.h
> +++ b/arch/powerpc/kernel/ptrace/ptrace-decl.h
> @@ -174,3 +174,8 @@ int tm_cgpr32_set(struct task_struct *target, const struct user_regset *regset,
> /* ptrace-view */
>
> extern const struct user_regset_view user_ppc_native_view;
> +
> +/* ptrace-(no)adv */
> +int ptrace_set_debugreg(struct task_struct *task, unsigned long addr, unsigned long data);
> +long ppc_set_hwdebug(struct task_struct *child, struct ppc_hw_breakpoint *bp_info);
> +long ppc_del_hwdebug(struct task_struct *child, long data);
> diff --git a/arch/powerpc/kernel/ptrace/ptrace-noadv.c b/arch/powerpc/kernel/ptrace/ptrace-noadv.c
> new file mode 100644
> index 000000000000..cf05fadba0d5
> --- /dev/null
> +++ b/arch/powerpc/kernel/ptrace/ptrace-noadv.c
> @@ -0,0 +1,236 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +
> +#include <linux/regset.h>
> +#include <linux/hw_breakpoint.h>
> +
> +#include <asm/debug.h>
> +
> +#include "ptrace-decl.h"
> +
> +void user_enable_single_step(struct task_struct *task)
> +{
> + struct pt_regs *regs = task->thread.regs;
> +
> + if (regs != NULL) {
> + regs->msr &= ~MSR_BE;
> + regs->msr |= MSR_SE;
> + }
> + set_tsk_thread_flag(task, TIF_SINGLESTEP);
> +}
> +
> +void user_enable_block_step(struct task_struct *task)
> +{
> + struct pt_regs *regs = task->thread.regs;
> +
> + if (regs != NULL) {
> + regs->msr &= ~MSR_SE;
> + regs->msr |= MSR_BE;
> + }
> + set_tsk_thread_flag(task, TIF_SINGLESTEP);
> +}
> +
> +void user_disable_single_step(struct task_struct *task)
> +{
> + struct pt_regs *regs = task->thread.regs;
> +
> + if (regs != NULL)
> + regs->msr &= ~(MSR_SE | MSR_BE);
> +
> + clear_tsk_thread_flag(task, TIF_SINGLESTEP);
> +}
> +
> +int ptrace_set_debugreg(struct task_struct *task, unsigned long addr, unsigned long data)
> +{
> +#ifdef CONFIG_HAVE_HW_BREAKPOINT
> + int ret;
> + struct thread_struct *thread = &task->thread;
> + struct perf_event *bp;
> + struct perf_event_attr attr;
> +#endif /* CONFIG_HAVE_HW_BREAKPOINT */
> + bool set_bp = true;
> + struct arch_hw_breakpoint hw_brk;
> +
> + /* For ppc64 we support one DABR and no IABR's at the moment (ppc64).
> + * For embedded processors we support one DAC and no IAC's at the
> + * moment.
> + */
> + if (addr > 0)
> + return -EINVAL;
> +
> + /* The bottom 3 bits in dabr are flags */
> + if ((data & ~0x7UL) >= TASK_SIZE)
> + return -EIO;
> +
> + /* For processors using DABR (i.e. 970), the bottom 3 bits are flags.
> + * It was assumed, on previous implementations, that 3 bits were
> + * passed together with the data address, fitting the design of the
> + * DABR register, as follows:
> + *
> + * bit 0: Read flag
> + * bit 1: Write flag
> + * bit 2: Breakpoint translation
> + *
> + * Thus, we use them here as so.
> + */
> +
> + /* Ensure breakpoint translation bit is set */
> + if (data && !(data & HW_BRK_TYPE_TRANSLATE))
> + return -EIO;
> + hw_brk.address = data & (~HW_BRK_TYPE_DABR);
> + hw_brk.type = (data & HW_BRK_TYPE_DABR) | HW_BRK_TYPE_PRIV_ALL;
> + hw_brk.len = DABR_MAX_LEN;
> + hw_brk.hw_len = DABR_MAX_LEN;
> + set_bp = (data) && (hw_brk.type & HW_BRK_TYPE_RDWR);
> +#ifdef CONFIG_HAVE_HW_BREAKPOINT
> + bp = thread->ptrace_bps[0];
> + if (!set_bp) {
> + if (bp) {
> + unregister_hw_breakpoint(bp);
> + thread->ptrace_bps[0] = NULL;
> + }
> + return 0;
> + }
> + if (bp) {
> + attr = bp->attr;
> + attr.bp_addr = hw_brk.address;
> + attr.bp_len = DABR_MAX_LEN;
> + arch_bp_generic_fields(hw_brk.type, &attr.bp_type);
> +
> + /* Enable breakpoint */
> + attr.disabled = false;
> +
> + ret = modify_user_hw_breakpoint(bp, &attr);
> + if (ret)
> + return ret;
> +
> + thread->ptrace_bps[0] = bp;
> + thread->hw_brk = hw_brk;
> + return 0;
> + }
> +
> + /* Create a new breakpoint request if one doesn't exist already */
> + hw_breakpoint_init(&attr);
> + attr.bp_addr = hw_brk.address;
> + attr.bp_len = DABR_MAX_LEN;
> + arch_bp_generic_fields(hw_brk.type,
> + &attr.bp_type);
> +
> + thread->ptrace_bps[0] = bp = register_user_hw_breakpoint(&attr,
> + ptrace_triggered, NULL, task);
> + if (IS_ERR(bp)) {
> + thread->ptrace_bps[0] = NULL;
> + return PTR_ERR(bp);
> + }
> +
> +#else /* !CONFIG_HAVE_HW_BREAKPOINT */
> + if (set_bp && (!ppc_breakpoint_available()))
> + return -ENODEV;
> +#endif /* CONFIG_HAVE_HW_BREAKPOINT */
> + task->thread.hw_brk = hw_brk;
> + return 0;
> +}
> +
> +long ppc_set_hwdebug(struct task_struct *child, struct ppc_hw_breakpoint *bp_info)
> +{
> +#ifdef CONFIG_HAVE_HW_BREAKPOINT
> + int len = 0;
> + struct thread_struct *thread = &child->thread;
> + struct perf_event *bp;
> + struct perf_event_attr attr;
> +#endif /* CONFIG_HAVE_HW_BREAKPOINT */
> + struct arch_hw_breakpoint brk;
> +
> + if (bp_info->version != 1)
> + return -ENOTSUPP;
> + /*
> + * We only support one data breakpoint
> + */
> + if ((bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_RW) == 0 ||
> + (bp_info->trigger_type & ~PPC_BREAKPOINT_TRIGGER_RW) != 0 ||
> + bp_info->condition_mode != PPC_BREAKPOINT_CONDITION_NONE)
> + return -EINVAL;
> +
> + if ((unsigned long)bp_info->addr >= TASK_SIZE)
> + return -EIO;
> +
> + brk.address = bp_info->addr & ~7UL;
> + brk.type = HW_BRK_TYPE_TRANSLATE;
> + brk.len = DABR_MAX_LEN;
> + if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_READ)
> + brk.type |= HW_BRK_TYPE_READ;
> + if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_WRITE)
> + brk.type |= HW_BRK_TYPE_WRITE;
> +#ifdef CONFIG_HAVE_HW_BREAKPOINT
> + /*
> + * Check if the request is for 'range' breakpoints. We can
> + * support it if range < 8 bytes.
> + */
> + if (bp_info->addr_mode == PPC_BREAKPOINT_MODE_RANGE_INCLUSIVE)
> + len = bp_info->addr2 - bp_info->addr;
> + else if (bp_info->addr_mode == PPC_BREAKPOINT_MODE_EXACT)
> + len = 1;
> + else
> + return -EINVAL;
> + bp = thread->ptrace_bps[0];
> + if (bp)
> + return -ENOSPC;
> +
> + /* Create a new breakpoint request if one doesn't exist already */
> + hw_breakpoint_init(&attr);
> + attr.bp_addr = (unsigned long)bp_info->addr & ~HW_BREAKPOINT_ALIGN;
> + attr.bp_len = len;
> + arch_bp_generic_fields(brk.type, &attr.bp_type);
> +
> + bp = register_user_hw_breakpoint(&attr, ptrace_triggered, NULL, child);
> + thread->ptrace_bps[0] = bp;
> + if (IS_ERR(bp)) {
> + thread->ptrace_bps[0] = NULL;
> + return PTR_ERR(bp);
> + }
> +
> + return 1;
> +#endif /* CONFIG_HAVE_HW_BREAKPOINT */
> +
> + if (bp_info->addr_mode != PPC_BREAKPOINT_MODE_EXACT)
> + return -EINVAL;
> +
> + if (child->thread.hw_brk.address)
> + return -ENOSPC;
> +
> + if (!ppc_breakpoint_available())
> + return -ENODEV;
> +
> + child->thread.hw_brk = brk;
> +
> + return 1;
> +}
> +
> +long ppc_del_hwdebug(struct task_struct *child, long data)
> +{
> +#ifdef CONFIG_HAVE_HW_BREAKPOINT
> + int ret = 0;
> + struct thread_struct *thread = &child->thread;
> + struct perf_event *bp;
> +#endif /* CONFIG_HAVE_HW_BREAKPOINT */
> + if (data != 1)
> + return -EINVAL;
> +
> +#ifdef CONFIG_HAVE_HW_BREAKPOINT
> + bp = thread->ptrace_bps[0];
> + if (bp) {
> + unregister_hw_breakpoint(bp);
> + thread->ptrace_bps[0] = NULL;
> + } else {
> + ret = -ENOENT;
> + }
> + return ret;
> +#else /* CONFIG_HAVE_HW_BREAKPOINT */
> + if (child->thread.hw_brk.address == 0)
> + return -ENOENT;
> +
> + child->thread.hw_brk.address = 0;
> + child->thread.hw_brk.type = 0;
> +#endif /* CONFIG_HAVE_HW_BREAKPOINT */
> +
> + return 0;
> +}
> diff --git a/arch/powerpc/kernel/ptrace/ptrace.c b/arch/powerpc/kernel/ptrace/ptrace.c
> index 95e66dad32e0..48e095e88a2f 100644
> --- a/arch/powerpc/kernel/ptrace/ptrace.c
> +++ b/arch/powerpc/kernel/ptrace/ptrace.c
> @@ -31,71 +31,6 @@
>
> #include "ptrace-decl.h"
>
> -void user_enable_single_step(struct task_struct *task)
> -{
> - struct pt_regs *regs = task->thread.regs;
> -
> - if (regs != NULL) {
> -#ifdef CONFIG_PPC_ADV_DEBUG_REGS
> - task->thread.debug.dbcr0 &= ~DBCR0_BT;
> - task->thread.debug.dbcr0 |= DBCR0_IDM | DBCR0_IC;
> - regs->msr |= MSR_DE;
> -#else
> - regs->msr &= ~MSR_BE;
> - regs->msr |= MSR_SE;
> -#endif
> - }
> - set_tsk_thread_flag(task, TIF_SINGLESTEP);
> -}
> -
> -void user_enable_block_step(struct task_struct *task)
> -{
> - struct pt_regs *regs = task->thread.regs;
> -
> - if (regs != NULL) {
> -#ifdef CONFIG_PPC_ADV_DEBUG_REGS
> - task->thread.debug.dbcr0 &= ~DBCR0_IC;
> - task->thread.debug.dbcr0 = DBCR0_IDM | DBCR0_BT;
> - regs->msr |= MSR_DE;
> -#else
> - regs->msr &= ~MSR_SE;
> - regs->msr |= MSR_BE;
> -#endif
> - }
> - set_tsk_thread_flag(task, TIF_SINGLESTEP);
> -}
> -
> -void user_disable_single_step(struct task_struct *task)
> -{
> - struct pt_regs *regs = task->thread.regs;
> -
> - if (regs != NULL) {
> -#ifdef CONFIG_PPC_ADV_DEBUG_REGS
> - /*
> - * The logic to disable single stepping should be as
> - * simple as turning off the Instruction Complete flag.
> - * And, after doing so, if all debug flags are off, turn
> - * off DBCR0(IDM) and MSR(DE) .... Torez
> - */
> - task->thread.debug.dbcr0 &= ~(DBCR0_IC|DBCR0_BT);
> - /*
> - * Test to see if any of the DBCR_ACTIVE_EVENTS bits are set.
> - */
> - if (!DBCR_ACTIVE_EVENTS(task->thread.debug.dbcr0,
> - task->thread.debug.dbcr1)) {
> - /*
> - * All debug events were off.....
> - */
> - task->thread.debug.dbcr0 &= ~DBCR0_IDM;
> - regs->msr &= ~MSR_DE;
> - }
> -#else
> - regs->msr &= ~(MSR_SE | MSR_BE);
> -#endif
> - }
> - clear_tsk_thread_flag(task, TIF_SINGLESTEP);
> -}
> -
> #ifdef CONFIG_HAVE_HW_BREAKPOINT
> void ptrace_triggered(struct perf_event *bp,
> struct perf_sample_data *data, struct pt_regs *regs)
> @@ -114,138 +49,6 @@ void ptrace_triggered(struct perf_event *bp,
> }
> #endif /* CONFIG_HAVE_HW_BREAKPOINT */
>
> -static int ptrace_set_debugreg(struct task_struct *task, unsigned long addr,
> - unsigned long data)
> -{
> -#ifdef CONFIG_HAVE_HW_BREAKPOINT
> - int ret;
> - struct thread_struct *thread = &(task->thread);
> - struct perf_event *bp;
> - struct perf_event_attr attr;
> -#endif /* CONFIG_HAVE_HW_BREAKPOINT */
> -#ifndef CONFIG_PPC_ADV_DEBUG_REGS
> - bool set_bp = true;
> - struct arch_hw_breakpoint hw_brk;
> -#endif
> -
> - /* For ppc64 we support one DABR and no IABR's at the moment (ppc64).
> - * For embedded processors we support one DAC and no IAC's at the
> - * moment.
> - */
> - if (addr > 0)
> - return -EINVAL;
> -
> - /* The bottom 3 bits in dabr are flags */
> - if ((data & ~0x7UL) >= TASK_SIZE)
> - return -EIO;
> -
> -#ifndef CONFIG_PPC_ADV_DEBUG_REGS
> - /* For processors using DABR (i.e. 970), the bottom 3 bits are flags.
> - * It was assumed, on previous implementations, that 3 bits were
> - * passed together with the data address, fitting the design of the
> - * DABR register, as follows:
> - *
> - * bit 0: Read flag
> - * bit 1: Write flag
> - * bit 2: Breakpoint translation
> - *
> - * Thus, we use them here as so.
> - */
> -
> - /* Ensure breakpoint translation bit is set */
> - if (data && !(data & HW_BRK_TYPE_TRANSLATE))
> - return -EIO;
> - hw_brk.address = data & (~HW_BRK_TYPE_DABR);
> - hw_brk.type = (data & HW_BRK_TYPE_DABR) | HW_BRK_TYPE_PRIV_ALL;
> - hw_brk.len = DABR_MAX_LEN;
> - hw_brk.hw_len = DABR_MAX_LEN;
> - set_bp = (data) && (hw_brk.type & HW_BRK_TYPE_RDWR);
> -#ifdef CONFIG_HAVE_HW_BREAKPOINT
> - bp = thread->ptrace_bps[0];
> - if (!set_bp) {
> - if (bp) {
> - unregister_hw_breakpoint(bp);
> - thread->ptrace_bps[0] = NULL;
> - }
> - return 0;
> - }
> - if (bp) {
> - attr = bp->attr;
> - attr.bp_addr = hw_brk.address;
> - attr.bp_len = DABR_MAX_LEN;
> - arch_bp_generic_fields(hw_brk.type, &attr.bp_type);
> -
> - /* Enable breakpoint */
> - attr.disabled = false;
> -
> - ret = modify_user_hw_breakpoint(bp, &attr);
> - if (ret) {
> - return ret;
> - }
> - thread->ptrace_bps[0] = bp;
> - thread->hw_brk = hw_brk;
> - return 0;
> - }
> -
> - /* Create a new breakpoint request if one doesn't exist already */
> - hw_breakpoint_init(&attr);
> - attr.bp_addr = hw_brk.address;
> - attr.bp_len = DABR_MAX_LEN;
> - arch_bp_generic_fields(hw_brk.type,
> - &attr.bp_type);
> -
> - thread->ptrace_bps[0] = bp = register_user_hw_breakpoint(&attr,
> - ptrace_triggered, NULL, task);
> - if (IS_ERR(bp)) {
> - thread->ptrace_bps[0] = NULL;
> - return PTR_ERR(bp);
> - }
> -
> -#else /* !CONFIG_HAVE_HW_BREAKPOINT */
> - if (set_bp && (!ppc_breakpoint_available()))
> - return -ENODEV;
> -#endif /* CONFIG_HAVE_HW_BREAKPOINT */
> - task->thread.hw_brk = hw_brk;
> -#else /* CONFIG_PPC_ADV_DEBUG_REGS */
> - /* As described above, it was assumed 3 bits were passed with the data
> - * address, but we will assume only the mode bits will be passed
> - * as to not cause alignment restrictions for DAC-based processors.
> - */
> -
> - /* DAC's hold the whole address without any mode flags */
> - task->thread.debug.dac1 = data & ~0x3UL;
> -
> - if (task->thread.debug.dac1 == 0) {
> - dbcr_dac(task) &= ~(DBCR_DAC1R | DBCR_DAC1W);
> - if (!DBCR_ACTIVE_EVENTS(task->thread.debug.dbcr0,
> - task->thread.debug.dbcr1)) {
> - task->thread.regs->msr &= ~MSR_DE;
> - task->thread.debug.dbcr0 &= ~DBCR0_IDM;
> - }
> - return 0;
> - }
> -
> - /* Read or Write bits must be set */
> -
> - if (!(data & 0x3UL))
> - return -EINVAL;
> -
> - /* Set the Internal Debugging flag (IDM bit 1) for the DBCR0
> - register */
> - task->thread.debug.dbcr0 |= DBCR0_IDM;
> -
> - /* Check for write and read flags and set DBCR0
> - accordingly */
> - dbcr_dac(task) &= ~(DBCR_DAC1R|DBCR_DAC1W);
> - if (data & 0x1UL)
> - dbcr_dac(task) |= DBCR_DAC1R;
> - if (data & 0x2UL)
> - dbcr_dac(task) |= DBCR_DAC1W;
> - task->thread.regs->msr |= MSR_DE;
> -#endif /* CONFIG_PPC_ADV_DEBUG_REGS */
> - return 0;
> -}
> -
> /*
> * Called by kernel/ptrace.c when detaching..
> *
> @@ -257,459 +60,6 @@ void ptrace_disable(struct task_struct *child)
> user_disable_single_step(child);
> }
>
> -#ifdef CONFIG_PPC_ADV_DEBUG_REGS
> -static long set_instruction_bp(struct task_struct *child,
> - struct ppc_hw_breakpoint *bp_info)
> -{
> - int slot;
> - int slot1_in_use = ((child->thread.debug.dbcr0 & DBCR0_IAC1) != 0);
> - int slot2_in_use = ((child->thread.debug.dbcr0 & DBCR0_IAC2) != 0);
> - int slot3_in_use = ((child->thread.debug.dbcr0 & DBCR0_IAC3) != 0);
> - int slot4_in_use = ((child->thread.debug.dbcr0 & DBCR0_IAC4) != 0);
> -
> - if (dbcr_iac_range(child) & DBCR_IAC12MODE)
> - slot2_in_use = 1;
> - if (dbcr_iac_range(child) & DBCR_IAC34MODE)
> - slot4_in_use = 1;
> -
> - if (bp_info->addr >= TASK_SIZE)
> - return -EIO;
> -
> - if (bp_info->addr_mode != PPC_BREAKPOINT_MODE_EXACT) {
> -
> - /* Make sure range is valid. */
> - if (bp_info->addr2 >= TASK_SIZE)
> - return -EIO;
> -
> - /* We need a pair of IAC regsisters */
> - if ((!slot1_in_use) && (!slot2_in_use)) {
> - slot = 1;
> - child->thread.debug.iac1 = bp_info->addr;
> - child->thread.debug.iac2 = bp_info->addr2;
> - child->thread.debug.dbcr0 |= DBCR0_IAC1;
> - if (bp_info->addr_mode ==
> - PPC_BREAKPOINT_MODE_RANGE_EXCLUSIVE)
> - dbcr_iac_range(child) |= DBCR_IAC12X;
> - else
> - dbcr_iac_range(child) |= DBCR_IAC12I;
> -#if CONFIG_PPC_ADV_DEBUG_IACS > 2
> - } else if ((!slot3_in_use) && (!slot4_in_use)) {
> - slot = 3;
> - child->thread.debug.iac3 = bp_info->addr;
> - child->thread.debug.iac4 = bp_info->addr2;
> - child->thread.debug.dbcr0 |= DBCR0_IAC3;
> - if (bp_info->addr_mode ==
> - PPC_BREAKPOINT_MODE_RANGE_EXCLUSIVE)
> - dbcr_iac_range(child) |= DBCR_IAC34X;
> - else
> - dbcr_iac_range(child) |= DBCR_IAC34I;
> -#endif
> - } else
> - return -ENOSPC;
> - } else {
> - /* We only need one. If possible leave a pair free in
> - * case a range is needed later
> - */
> - if (!slot1_in_use) {
> - /*
> - * Don't use iac1 if iac1-iac2 are free and either
> - * iac3 or iac4 (but not both) are free
> - */
> - if (slot2_in_use || (slot3_in_use == slot4_in_use)) {
> - slot = 1;
> - child->thread.debug.iac1 = bp_info->addr;
> - child->thread.debug.dbcr0 |= DBCR0_IAC1;
> - goto out;
> - }
> - }
> - if (!slot2_in_use) {
> - slot = 2;
> - child->thread.debug.iac2 = bp_info->addr;
> - child->thread.debug.dbcr0 |= DBCR0_IAC2;
> -#if CONFIG_PPC_ADV_DEBUG_IACS > 2
> - } else if (!slot3_in_use) {
> - slot = 3;
> - child->thread.debug.iac3 = bp_info->addr;
> - child->thread.debug.dbcr0 |= DBCR0_IAC3;
> - } else if (!slot4_in_use) {
> - slot = 4;
> - child->thread.debug.iac4 = bp_info->addr;
> - child->thread.debug.dbcr0 |= DBCR0_IAC4;
> -#endif
> - } else
> - return -ENOSPC;
> - }
> -out:
> - child->thread.debug.dbcr0 |= DBCR0_IDM;
> - child->thread.regs->msr |= MSR_DE;
> -
> - return slot;
> -}
> -
> -static int del_instruction_bp(struct task_struct *child, int slot)
> -{
> - switch (slot) {
> - case 1:
> - if ((child->thread.debug.dbcr0 & DBCR0_IAC1) == 0)
> - return -ENOENT;
> -
> - if (dbcr_iac_range(child) & DBCR_IAC12MODE) {
> - /* address range - clear slots 1 & 2 */
> - child->thread.debug.iac2 = 0;
> - dbcr_iac_range(child) &= ~DBCR_IAC12MODE;
> - }
> - child->thread.debug.iac1 = 0;
> - child->thread.debug.dbcr0 &= ~DBCR0_IAC1;
> - break;
> - case 2:
> - if ((child->thread.debug.dbcr0 & DBCR0_IAC2) == 0)
> - return -ENOENT;
> -
> - if (dbcr_iac_range(child) & DBCR_IAC12MODE)
> - /* used in a range */
> - return -EINVAL;
> - child->thread.debug.iac2 = 0;
> - child->thread.debug.dbcr0 &= ~DBCR0_IAC2;
> - break;
> -#if CONFIG_PPC_ADV_DEBUG_IACS > 2
> - case 3:
> - if ((child->thread.debug.dbcr0 & DBCR0_IAC3) == 0)
> - return -ENOENT;
> -
> - if (dbcr_iac_range(child) & DBCR_IAC34MODE) {
> - /* address range - clear slots 3 & 4 */
> - child->thread.debug.iac4 = 0;
> - dbcr_iac_range(child) &= ~DBCR_IAC34MODE;
> - }
> - child->thread.debug.iac3 = 0;
> - child->thread.debug.dbcr0 &= ~DBCR0_IAC3;
> - break;
> - case 4:
> - if ((child->thread.debug.dbcr0 & DBCR0_IAC4) == 0)
> - return -ENOENT;
> -
> - if (dbcr_iac_range(child) & DBCR_IAC34MODE)
> - /* Used in a range */
> - return -EINVAL;
> - child->thread.debug.iac4 = 0;
> - child->thread.debug.dbcr0 &= ~DBCR0_IAC4;
> - break;
> -#endif
> - default:
> - return -EINVAL;
> - }
> - return 0;
> -}
> -
> -static int set_dac(struct task_struct *child, struct ppc_hw_breakpoint *bp_info)
> -{
> - int byte_enable =
> - (bp_info->condition_mode >> PPC_BREAKPOINT_CONDITION_BE_SHIFT)
> - & 0xf;
> - int condition_mode =
> - bp_info->condition_mode & PPC_BREAKPOINT_CONDITION_MODE;
> - int slot;
> -
> - if (byte_enable && (condition_mode == 0))
> - return -EINVAL;
> -
> - if (bp_info->addr >= TASK_SIZE)
> - return -EIO;
> -
> - if ((dbcr_dac(child) & (DBCR_DAC1R | DBCR_DAC1W)) == 0) {
> - slot = 1;
> - if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_READ)
> - dbcr_dac(child) |= DBCR_DAC1R;
> - if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_WRITE)
> - dbcr_dac(child) |= DBCR_DAC1W;
> - child->thread.debug.dac1 = (unsigned long)bp_info->addr;
> -#if CONFIG_PPC_ADV_DEBUG_DVCS > 0
> - if (byte_enable) {
> - child->thread.debug.dvc1 =
> - (unsigned long)bp_info->condition_value;
> - child->thread.debug.dbcr2 |=
> - ((byte_enable << DBCR2_DVC1BE_SHIFT) |
> - (condition_mode << DBCR2_DVC1M_SHIFT));
> - }
> -#endif
> -#ifdef CONFIG_PPC_ADV_DEBUG_DAC_RANGE
> - } else if (child->thread.debug.dbcr2 & DBCR2_DAC12MODE) {
> - /* Both dac1 and dac2 are part of a range */
> - return -ENOSPC;
> -#endif
> - } else if ((dbcr_dac(child) & (DBCR_DAC2R | DBCR_DAC2W)) == 0) {
> - slot = 2;
> - if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_READ)
> - dbcr_dac(child) |= DBCR_DAC2R;
> - if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_WRITE)
> - dbcr_dac(child) |= DBCR_DAC2W;
> - child->thread.debug.dac2 = (unsigned long)bp_info->addr;
> -#if CONFIG_PPC_ADV_DEBUG_DVCS > 0
> - if (byte_enable) {
> - child->thread.debug.dvc2 =
> - (unsigned long)bp_info->condition_value;
> - child->thread.debug.dbcr2 |=
> - ((byte_enable << DBCR2_DVC2BE_SHIFT) |
> - (condition_mode << DBCR2_DVC2M_SHIFT));
> - }
> -#endif
> - } else
> - return -ENOSPC;
> - child->thread.debug.dbcr0 |= DBCR0_IDM;
> - child->thread.regs->msr |= MSR_DE;
> -
> - return slot + 4;
> -}
> -
> -static int del_dac(struct task_struct *child, int slot)
> -{
> - if (slot == 1) {
> - if ((dbcr_dac(child) & (DBCR_DAC1R | DBCR_DAC1W)) == 0)
> - return -ENOENT;
> -
> - child->thread.debug.dac1 = 0;
> - dbcr_dac(child) &= ~(DBCR_DAC1R | DBCR_DAC1W);
> -#ifdef CONFIG_PPC_ADV_DEBUG_DAC_RANGE
> - if (child->thread.debug.dbcr2 & DBCR2_DAC12MODE) {
> - child->thread.debug.dac2 = 0;
> - child->thread.debug.dbcr2 &= ~DBCR2_DAC12MODE;
> - }
> - child->thread.debug.dbcr2 &= ~(DBCR2_DVC1M | DBCR2_DVC1BE);
> -#endif
> -#if CONFIG_PPC_ADV_DEBUG_DVCS > 0
> - child->thread.debug.dvc1 = 0;
> -#endif
> - } else if (slot == 2) {
> - if ((dbcr_dac(child) & (DBCR_DAC2R | DBCR_DAC2W)) == 0)
> - return -ENOENT;
> -
> -#ifdef CONFIG_PPC_ADV_DEBUG_DAC_RANGE
> - if (child->thread.debug.dbcr2 & DBCR2_DAC12MODE)
> - /* Part of a range */
> - return -EINVAL;
> - child->thread.debug.dbcr2 &= ~(DBCR2_DVC2M | DBCR2_DVC2BE);
> -#endif
> -#if CONFIG_PPC_ADV_DEBUG_DVCS > 0
> - child->thread.debug.dvc2 = 0;
> -#endif
> - child->thread.debug.dac2 = 0;
> - dbcr_dac(child) &= ~(DBCR_DAC2R | DBCR_DAC2W);
> - } else
> - return -EINVAL;
> -
> - return 0;
> -}
> -#endif /* CONFIG_PPC_ADV_DEBUG_REGS */
> -
> -#ifdef CONFIG_PPC_ADV_DEBUG_DAC_RANGE
> -static int set_dac_range(struct task_struct *child,
> - struct ppc_hw_breakpoint *bp_info)
> -{
> - int mode = bp_info->addr_mode & PPC_BREAKPOINT_MODE_MASK;
> -
> - /* We don't allow range watchpoints to be used with DVC */
> - if (bp_info->condition_mode)
> - return -EINVAL;
> -
> - /*
> - * Best effort to verify the address range. The user/supervisor bits
> - * prevent trapping in kernel space, but let's fail on an obvious bad
> - * range. The simple test on the mask is not fool-proof, and any
> - * exclusive range will spill over into kernel space.
> - */
> - if (bp_info->addr >= TASK_SIZE)
> - return -EIO;
> - if (mode == PPC_BREAKPOINT_MODE_MASK) {
> - /*
> - * dac2 is a bitmask. Don't allow a mask that makes a
> - * kernel space address from a valid dac1 value
> - */
> - if (~((unsigned long)bp_info->addr2) >= TASK_SIZE)
> - return -EIO;
> - } else {
> - /*
> - * For range breakpoints, addr2 must also be a valid address
> - */
> - if (bp_info->addr2 >= TASK_SIZE)
> - return -EIO;
> - }
> -
> - if (child->thread.debug.dbcr0 &
> - (DBCR0_DAC1R | DBCR0_DAC1W | DBCR0_DAC2R | DBCR0_DAC2W))
> - return -ENOSPC;
> -
> - if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_READ)
> - child->thread.debug.dbcr0 |= (DBCR0_DAC1R | DBCR0_IDM);
> - if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_WRITE)
> - child->thread.debug.dbcr0 |= (DBCR0_DAC1W | DBCR0_IDM);
> - child->thread.debug.dac1 = bp_info->addr;
> - child->thread.debug.dac2 = bp_info->addr2;
> - if (mode == PPC_BREAKPOINT_MODE_RANGE_INCLUSIVE)
> - child->thread.debug.dbcr2 |= DBCR2_DAC12M;
> - else if (mode == PPC_BREAKPOINT_MODE_RANGE_EXCLUSIVE)
> - child->thread.debug.dbcr2 |= DBCR2_DAC12MX;
> - else /* PPC_BREAKPOINT_MODE_MASK */
> - child->thread.debug.dbcr2 |= DBCR2_DAC12MM;
> - child->thread.regs->msr |= MSR_DE;
> -
> - return 5;
> -}
> -#endif /* CONFIG_PPC_ADV_DEBUG_DAC_RANGE */
> -
> -static long ppc_set_hwdebug(struct task_struct *child,
> - struct ppc_hw_breakpoint *bp_info)
> -{
> -#ifdef CONFIG_HAVE_HW_BREAKPOINT
> - int len = 0;
> - struct thread_struct *thread = &(child->thread);
> - struct perf_event *bp;
> - struct perf_event_attr attr;
> -#endif /* CONFIG_HAVE_HW_BREAKPOINT */
> -#ifndef CONFIG_PPC_ADV_DEBUG_REGS
> - struct arch_hw_breakpoint brk;
> -#endif
> -
> - if (bp_info->version != 1)
> - return -ENOTSUPP;
> -#ifdef CONFIG_PPC_ADV_DEBUG_REGS
> - /*
> - * Check for invalid flags and combinations
> - */
> - if ((bp_info->trigger_type == 0) ||
> - (bp_info->trigger_type & ~(PPC_BREAKPOINT_TRIGGER_EXECUTE |
> - PPC_BREAKPOINT_TRIGGER_RW)) ||
> - (bp_info->addr_mode & ~PPC_BREAKPOINT_MODE_MASK) ||
> - (bp_info->condition_mode &
> - ~(PPC_BREAKPOINT_CONDITION_MODE |
> - PPC_BREAKPOINT_CONDITION_BE_ALL)))
> - return -EINVAL;
> -#if CONFIG_PPC_ADV_DEBUG_DVCS == 0
> - if (bp_info->condition_mode != PPC_BREAKPOINT_CONDITION_NONE)
> - return -EINVAL;
> -#endif
> -
> - if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_EXECUTE) {
> - if ((bp_info->trigger_type != PPC_BREAKPOINT_TRIGGER_EXECUTE) ||
> - (bp_info->condition_mode != PPC_BREAKPOINT_CONDITION_NONE))
> - return -EINVAL;
> - return set_instruction_bp(child, bp_info);
> - }
> - if (bp_info->addr_mode == PPC_BREAKPOINT_MODE_EXACT)
> - return set_dac(child, bp_info);
> -
> -#ifdef CONFIG_PPC_ADV_DEBUG_DAC_RANGE
> - return set_dac_range(child, bp_info);
> -#else
> - return -EINVAL;
> -#endif
> -#else /* !CONFIG_PPC_ADV_DEBUG_DVCS */
> - /*
> - * We only support one data breakpoint
> - */
> - if ((bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_RW) == 0 ||
> - (bp_info->trigger_type & ~PPC_BREAKPOINT_TRIGGER_RW) != 0 ||
> - bp_info->condition_mode != PPC_BREAKPOINT_CONDITION_NONE)
> - return -EINVAL;
> -
> - if ((unsigned long)bp_info->addr >= TASK_SIZE)
> - return -EIO;
> -
> - brk.address = bp_info->addr & ~HW_BREAKPOINT_ALIGN;
> - brk.type = HW_BRK_TYPE_TRANSLATE;
> - brk.len = DABR_MAX_LEN;
> - if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_READ)
> - brk.type |= HW_BRK_TYPE_READ;
> - if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_WRITE)
> - brk.type |= HW_BRK_TYPE_WRITE;
> -#ifdef CONFIG_HAVE_HW_BREAKPOINT
> - if (bp_info->addr_mode == PPC_BREAKPOINT_MODE_RANGE_INCLUSIVE)
> - len = bp_info->addr2 - bp_info->addr;
> - else if (bp_info->addr_mode == PPC_BREAKPOINT_MODE_EXACT)
> - len = 1;
> - else
> - return -EINVAL;
> - bp = thread->ptrace_bps[0];
> - if (bp)
> - return -ENOSPC;
> -
> - /* Create a new breakpoint request if one doesn't exist already */
> - hw_breakpoint_init(&attr);
> - attr.bp_addr = (unsigned long)bp_info->addr;
> - attr.bp_len = len;
> - arch_bp_generic_fields(brk.type, &attr.bp_type);
> -
> - thread->ptrace_bps[0] = bp = register_user_hw_breakpoint(&attr,
> - ptrace_triggered, NULL, child);
> - if (IS_ERR(bp)) {
> - thread->ptrace_bps[0] = NULL;
> - return PTR_ERR(bp);
> - }
> -
> - return 1;
> -#endif /* CONFIG_HAVE_HW_BREAKPOINT */
> -
> - if (bp_info->addr_mode != PPC_BREAKPOINT_MODE_EXACT)
> - return -EINVAL;
> -
> - if (child->thread.hw_brk.address)
> - return -ENOSPC;
> -
> - if (!ppc_breakpoint_available())
> - return -ENODEV;
> -
> - child->thread.hw_brk = brk;
> -
> - return 1;
> -#endif /* !CONFIG_PPC_ADV_DEBUG_DVCS */
> -}
> -
> -static long ppc_del_hwdebug(struct task_struct *child, long data)
> -{
> -#ifdef CONFIG_HAVE_HW_BREAKPOINT
> - int ret = 0;
> - struct thread_struct *thread = &(child->thread);
> - struct perf_event *bp;
> -#endif /* CONFIG_HAVE_HW_BREAKPOINT */
> -#ifdef CONFIG_PPC_ADV_DEBUG_REGS
> - int rc;
> -
> - if (data <= 4)
> - rc = del_instruction_bp(child, (int)data);
> - else
> - rc = del_dac(child, (int)data - 4);
> -
> - if (!rc) {
> - if (!DBCR_ACTIVE_EVENTS(child->thread.debug.dbcr0,
> - child->thread.debug.dbcr1)) {
> - child->thread.debug.dbcr0 &= ~DBCR0_IDM;
> - child->thread.regs->msr &= ~MSR_DE;
> - }
> - }
> - return rc;
> -#else
> - if (data != 1)
> - return -EINVAL;
> -
> -#ifdef CONFIG_HAVE_HW_BREAKPOINT
> - bp = thread->ptrace_bps[0];
> - if (bp) {
> - unregister_hw_breakpoint(bp);
> - thread->ptrace_bps[0] = NULL;
> - } else
> - ret = -ENOENT;
> - return ret;
> -#else /* CONFIG_HAVE_HW_BREAKPOINT */
> - if (child->thread.hw_brk.address == 0)
> - return -ENOENT;
> -
> - child->thread.hw_brk.address = 0;
> - child->thread.hw_brk.type = 0;
> -#endif /* CONFIG_HAVE_HW_BREAKPOINT */
> -
> - return 0;
> -#endif
> -}
> -
> long arch_ptrace(struct task_struct *child, long request,
> unsigned long addr, unsigned long data)
> {
> --
> 2.25.0

\
 
 \ /
  Last update: 2020-03-20 03:13    [W:0.390 / U:0.532 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site