lkml.org 
[lkml]   [2020]   [Mar]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[Patch v5 6/6] arm64: dts: qcom: Indicate rpmhpd hosts a power domain that can be used as a warming device.
Date
RPMh hosts mx power domain that can be used to warm up the SoC.  Indicate
this by using #cooling-cells property.

Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org>
---

v3->v4:
- Removed subnode to indicate that mx power domain is a warming
device. Instead #cooling-cells is used as a power domain
provider property to indicate if the provider hosts a power
domain that can be used as a warming device.

arch/arm64/boot/dts/qcom/sdm845.dtsi | 1 +
1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index fe35d37a11cc..0d878b2ca351 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -3703,6 +3703,7 @@
rpmhpd: power-controller {
compatible = "qcom,sdm845-rpmhpd";
#power-domain-cells = <1>;
+ #cooling-cells = <2>;
operating-points-v2 = <&rpmhpd_opp_table>;

rpmhpd_opp_table: opp-table {
--
2.20.1
\
 
 \ /
  Last update: 2020-03-20 02:42    [W:0.380 / U:2.500 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site