lkml.org 
[lkml]   [2020]   [Mar]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 15/18] arm64: dts: freescale: sl28: enable sl28cpld
Date
Add the board management controller node.

Signed-off-by: Michael Walle <michael@walle.cc>
---
.../freescale/fsl-ls1028a-kontron-sl28.dts | 87 +++++++++++++++++++
1 file changed, 87 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts
index 1648a04ea79f..b74d9ac0c388 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts
@@ -8,6 +8,7 @@

/dts-v1/;
#include "fsl-ls1028a.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>

/ {
model = "Kontron SMARC-sAL28";
@@ -165,6 +166,92 @@
reg = <0x32>;
};

+ sl28cpld: sl28cpld@4a {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "kontron,sl28cpld";
+ reg = <0x4a>;
+ interrupts-extended = <&gpio2 6 IRQ_TYPE_EDGE_FALLING>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ cpld_gpio0: gpio@0 {
+ compatible = "kontron,sl28cpld-gpio";
+ reg = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-line-names =
+ "GPIO0_CAM0_PWR_N", "GPIO1_CAM1_PWR_N",
+ "GPIO2_CAM0_RST_N", "GPIO3_CAM1_RST_N",
+ "GPIO4_HDA_RST_N", "GPIO5_PWM_OUT",
+ "GPIO6_TACHIN", "GPIO7";
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ cpld_gpio1: gpio@1 {
+ compatible = "kontron,sl28cpld-gpio";
+ reg = <1>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-line-names =
+ "GPIO8", "GPIO9", "GPIO10", "GPIO11",
+ "", "", "", "";
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ cpld_gpo: gpo {
+ compatible = "kontron,sl28cpld-gpo";
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-line-names =
+ "LCD0 voltage enable",
+ "LCD0 backlight enable",
+ "eMMC reset", "LVDS bridge reset",
+ "LVDS bridge power-down",
+ "SDIO power enable",
+ "", "";
+ };
+
+ cpld_gpi: gpi {
+ compatible = "kontron,sl28cpld-gpi";
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-line-names =
+ "Power button", "Force recovery", "Sleep",
+ "Battery low", "Lid state", "Charging",
+ "Charger present", "";
+ };
+
+ hwmon {
+ compatible = "kontron,sl28cpld-fan";
+ };
+
+ pwm0: pwm@0 {
+ #pwm-cells = <2>;
+ compatible = "kontron,sl28cpld-pwm";
+ reg = <0>;
+ };
+
+ pwm1: pwm@1 {
+ #pwm-cells = <2>;
+ compatible = "kontron,sl28cpld-pwm";
+ reg = <1>;
+ };
+
+ watchdog {
+ compatible = "kontron,sl28cpld-wdt";
+ };
+ };
+
eeprom@50 {
compatible = "atmel,24c32";
reg = <0x50>;
--
2.20.1
\
 
 \ /
  Last update: 2020-03-17 21:52    [W:0.200 / U:0.072 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site