lkml.org 
[lkml]   [2020]   [Mar]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 17/18] arm64: dts: freescale: sl28: enable LED support
Date
Now that we have support for GPIO lines of the SMARC connector, enable
LED support on the KBox A-230-LS. There are two LEDs without fixed
functions, one is yellow and one is green. Unfortunately, it is just one
multi-color LED, thus while it is possible to enable both at the same
time it is hard to tell the difference between "yellow only" and "yellow
and green".

Signed-off-by: Michael Walle <michael@walle.cc>
---
.../fsl-ls1028a-kontron-kbox-a-230-ls.dts | 14 ++++++++++++++
1 file changed, 14 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts
index 4b4cc6a1573d..d4ca12b140b4 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts
@@ -16,6 +16,20 @@
model = "Kontron KBox A-230-LS";
compatible = "kontron,kbox-a-230-ls", "kontron,sl28-var4",
"kontron,sl28", "fsl,ls1028a";
+
+ leds {
+ compatible = "gpio-leds";
+
+ user_yellow {
+ label = "s1914:yellow:user";
+ gpios = <&cpld_gpio0 0 0>;
+ };
+
+ user_green {
+ label = "s1914:green:user";
+ gpios = <&cpld_gpio1 3 0>;
+ };
+ };
};

&enetc_mdio_pf3 {
--
2.20.1
\
 
 \ /
  Last update: 2020-03-17 21:51    [W:0.351 / U:0.920 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site