lkml.org 
[lkml]   [2020]   [Mar]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 08/18] watchdog: add support for sl28cpld watchdog
Date
This adds support for the watchdog of the sl28cpld board management
controller. This is part of a multi-function device driver.

Signed-off-by: Michael Walle <michael@walle.cc>
---
drivers/watchdog/Kconfig | 11 ++
drivers/watchdog/Makefile | 1 +
drivers/watchdog/sl28cpld_wdt.c | 238 ++++++++++++++++++++++++++++++++
3 files changed, 250 insertions(+)
create mode 100644 drivers/watchdog/sl28cpld_wdt.c

diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 9ea2b43d4b01..c78b90ccc8cf 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -340,6 +340,17 @@ config MLX_WDT
To compile this driver as a module, choose M here: the
module will be called mlx-wdt.

+config SL28CPLD_WATCHDOG
+ tristate "Kontron sl28 watchdog"
+ depends on MFD_SL28CPLD
+ select WATCHDOG_CORE
+ help
+ Say Y here to include support for the watchdog timer
+ on the Kontron sl28 CPLD.
+
+ To compile this driver as a module, choose M here: the
+ module will be called sl28cpld_wdt.
+
# ALPHA Architecture

# ARM Architecture
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index 2ee352bf3372..060e2f895fe8 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -223,3 +223,4 @@ obj-$(CONFIG_MENF21BMC_WATCHDOG) += menf21bmc_wdt.o
obj-$(CONFIG_MENZ069_WATCHDOG) += menz69_wdt.o
obj-$(CONFIG_RAVE_SP_WATCHDOG) += rave-sp-wdt.o
obj-$(CONFIG_STPMIC1_WATCHDOG) += stpmic1_wdt.o
+obj-$(CONFIG_SL28CPLD_WATCHDOG) += sl28cpld_wdt.o
diff --git a/drivers/watchdog/sl28cpld_wdt.c b/drivers/watchdog/sl28cpld_wdt.c
new file mode 100644
index 000000000000..5927b7ad0be4
--- /dev/null
+++ b/drivers/watchdog/sl28cpld_wdt.c
@@ -0,0 +1,238 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * SMARC-sAL28 Watchdog driver.
+ *
+ * Copyright 2019 Kontron Europe GmbH
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/regmap.h>
+#include <linux/platform_device.h>
+#include <linux/watchdog.h>
+
+/*
+ * Watchdog timer block registers.
+ */
+#define SL28CPLD_WDT_CTRL 0
+#define WDT_CTRL_EN BIT(0)
+#define WDT_CTRL_LOCK BIT(2)
+#define SL28CPLD_WDT_TIMEOUT 1
+#define SL28CPLD_WDT_KICK 2
+#define WDT_KICK_VALUE 0x6b
+#define SL28CPLD_WDT_COUNT 3
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
+ __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+static int timeout;
+module_param(timeout, int, 0);
+MODULE_PARM_DESC(timeout, "Initial watchdog timeout in seconds");
+
+struct sl28cpld_wdt {
+ struct watchdog_device wdd;
+ struct regmap *regmap;
+ u32 offset;
+};
+
+static int sl28cpld_wdt_ping(struct watchdog_device *wdd)
+{
+ struct sl28cpld_wdt *wdt = watchdog_get_drvdata(wdd);
+
+ return regmap_write(wdt->regmap, wdt->offset + SL28CPLD_WDT_KICK,
+ WDT_KICK_VALUE);
+}
+
+static int sl28cpld_wdt_start(struct watchdog_device *wdd)
+{
+ struct sl28cpld_wdt *wdt = watchdog_get_drvdata(wdd);
+ unsigned int val;
+
+ val = WDT_CTRL_EN;
+ if (nowayout)
+ val |= WDT_CTRL_LOCK;
+
+ return regmap_update_bits(wdt->regmap, wdt->offset + SL28CPLD_WDT_CTRL,
+ val, val);
+}
+
+static int sl28cpld_wdt_stop(struct watchdog_device *wdd)
+{
+ struct sl28cpld_wdt *wdt = watchdog_get_drvdata(wdd);
+
+ return regmap_update_bits(wdt->regmap, wdt->offset + SL28CPLD_WDT_CTRL,
+ WDT_CTRL_EN, 0);
+}
+
+static unsigned int sl28cpld_wdt_status(struct watchdog_device *wdd)
+{
+ struct sl28cpld_wdt *wdt = watchdog_get_drvdata(wdd);
+ unsigned int status;
+ int ret;
+
+ ret = regmap_read(wdt->regmap, wdt->offset + SL28CPLD_WDT_CTRL,
+ &status);
+ if (ret < 0)
+ return 0;
+
+ /* is the watchdog timer running? */
+ return (status & WDT_CTRL_EN) << WDOG_ACTIVE;
+}
+
+static unsigned int sl28cpld_wdt_get_timeleft(struct watchdog_device *wdd)
+{
+ struct sl28cpld_wdt *wdt = watchdog_get_drvdata(wdd);
+ int ret;
+ unsigned int val;
+
+ ret = regmap_read(wdt->regmap, wdt->offset + SL28CPLD_WDT_COUNT, &val);
+ if (ret < 0)
+ return 0;
+
+ return val;
+}
+
+static int sl28cpld_wdt_set_timeout(struct watchdog_device *wdd,
+ unsigned int timeout)
+{
+ int ret;
+ struct sl28cpld_wdt *wdt = watchdog_get_drvdata(wdd);
+
+ ret = regmap_write(wdt->regmap, wdt->offset + SL28CPLD_WDT_TIMEOUT,
+ timeout);
+ if (ret == 0)
+ wdd->timeout = timeout;
+
+ return ret;
+}
+
+static const struct watchdog_info sl28cpld_wdt_info = {
+ .options = WDIOF_MAGICCLOSE | WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
+ .identity = "SMARC-sAL28 CPLD watchdog",
+};
+
+static struct watchdog_ops sl28cpld_wdt_ops = {
+ .owner = THIS_MODULE,
+ .start = sl28cpld_wdt_start,
+ .stop = sl28cpld_wdt_stop,
+ .status = sl28cpld_wdt_status,
+ .ping = sl28cpld_wdt_ping,
+ .set_timeout = sl28cpld_wdt_set_timeout,
+ .get_timeleft = sl28cpld_wdt_get_timeleft,
+};
+
+static int sl28cpld_wdt_locked(struct sl28cpld_wdt *wdt)
+{
+ unsigned int val;
+ int ret;
+
+ ret = regmap_read(wdt->regmap, wdt->offset + SL28CPLD_WDT_CTRL, &val);
+ if (ret < 0)
+ return ret;
+
+ return val & WDT_CTRL_LOCK;
+}
+
+static int sl28cpld_wdt_probe(struct platform_device *pdev)
+{
+ struct sl28cpld_wdt *wdt;
+ struct watchdog_device *wdd;
+ struct resource *res;
+ unsigned int val;
+ int ret;
+
+ wdt = devm_kzalloc(&pdev->dev, sizeof(*wdt), GFP_KERNEL);
+ if (!wdt)
+ return -ENOMEM;
+
+ if (!pdev->dev.parent)
+ return -ENODEV;
+
+ wdt->regmap = dev_get_regmap(pdev->dev.parent, NULL);
+ if (!wdt->regmap)
+ return -ENODEV;
+
+ res = platform_get_resource(pdev, IORESOURCE_REG, 0);
+ if (res == NULL)
+ return -EINVAL;
+ wdt->offset = res->start;
+
+ /* initialize struct watchdog_device */
+ wdd = &wdt->wdd;
+ wdd->parent = &pdev->dev;
+ wdd->info = &sl28cpld_wdt_info;
+ wdd->ops = &sl28cpld_wdt_ops;
+ wdd->min_timeout = 1;
+ wdd->max_timeout = 255;
+
+ watchdog_set_drvdata(wdd, wdt);
+
+ /* if the watchdog is locked, we set nowayout to true */
+ ret = sl28cpld_wdt_locked(wdt);
+ if (ret < 0)
+ return ret;
+ if (ret)
+ nowayout = true;
+ watchdog_set_nowayout(wdd, nowayout);
+
+ /*
+ * Initial timeout value, can either be set by kernel parameter or by
+ * the device tree. If both are not given the current value is used.
+ */
+ watchdog_init_timeout(wdd, timeout, &pdev->dev);
+ if (wdd->timeout) {
+ sl28cpld_wdt_set_timeout(wdd, wdd->timeout);
+ } else {
+ ret = regmap_read(wdt->regmap,
+ wdt->offset + SL28CPLD_WDT_TIMEOUT, &val);
+ if (ret < 0)
+ return ret;
+ wdd->timeout = val;
+ }
+
+ ret = watchdog_register_device(wdd);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "failed to register watchdog device\n");
+ return ret;
+ }
+
+ platform_set_drvdata(pdev, wdt);
+
+ dev_info(&pdev->dev, "CPLD watchdog: initial timeout %d sec%s\n",
+ wdd->timeout, nowayout ? ", nowayout" : "");
+
+ return 0;
+}
+
+static int sl28cpld_wdt_remove(struct platform_device *pdev)
+{
+ struct sl28cpld_wdt *wdt = platform_get_drvdata(pdev);
+
+ watchdog_unregister_device(&wdt->wdd);
+
+ return 0;
+}
+
+static void sl28cpld_wdt_shutdown(struct platform_device *pdev)
+{
+ struct sl28cpld_wdt *wdt = platform_get_drvdata(pdev);
+
+ sl28cpld_wdt_stop(&wdt->wdd);
+}
+
+static struct platform_driver sl28cpld_wdt_driver = {
+ .probe = sl28cpld_wdt_probe,
+ .remove = sl28cpld_wdt_remove,
+ .shutdown = sl28cpld_wdt_shutdown,
+ .driver = {
+ .name = "sl28cpld-wdt",
+ },
+};
+module_platform_driver(sl28cpld_wdt_driver);
+
+MODULE_DESCRIPTION("sl28cpld Watchdog Driver");
+MODULE_LICENSE("GPL");
--
2.20.1
\
 
 \ /
  Last update: 2020-03-17 21:51    [W:0.143 / U:0.448 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site