lkml.org 
[lkml]   [2020]   [Mar]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] net: phy: dp83867: w/a for fld detect threshold bootstrapping issue
Date
When the DP83867 PHY is strapped to enable Fast Link Drop (FLD) feature
STRAP_STS2.STRAP_ FLD (reg 0x006F bit 10), the Energy Lost Threshold for
FLD Energy Lost Mode FLD_THR_CFG.ENERGY_LOST_FLD_THR (reg 0x002e bits 2:0)
will be defaulted to 0x2. This may cause the phy link to be unstable. The
new DP83867 DM recommends to always restore ENERGY_LOST_FLD_THR to 0x1.

Hence, restore default value of FLD_THR_CFG.ENERGY_LOST_FLD_THR to 0x1 when
FLD is enabled by bootstrapping as recommended by DM.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
---
drivers/net/phy/dp83867.c | 21 ++++++++++++++++++++-
1 file changed, 20 insertions(+), 1 deletion(-)

diff --git a/drivers/net/phy/dp83867.c b/drivers/net/phy/dp83867.c
index 13f7f2d5a2ea..b55e3c0403ed 100644
--- a/drivers/net/phy/dp83867.c
+++ b/drivers/net/phy/dp83867.c
@@ -30,7 +30,8 @@
#define DP83867_CTRL 0x1f

/* Extended Registers */
-#define DP83867_CFG4 0x0031
+#define DP83867_FLD_THR_CFG 0x002e
+#define DP83867_CFG4 0x0031
#define DP83867_CFG4_SGMII_ANEG_MASK (BIT(5) | BIT(6))
#define DP83867_CFG4_SGMII_ANEG_TIMER_11MS (3 << 5)
#define DP83867_CFG4_SGMII_ANEG_TIMER_800US (2 << 5)
@@ -93,6 +94,7 @@
#define DP83867_STRAP_STS2_CLK_SKEW_RX_MASK GENMASK(2, 0)
#define DP83867_STRAP_STS2_CLK_SKEW_RX_SHIFT 0
#define DP83867_STRAP_STS2_CLK_SKEW_NONE BIT(2)
+#define DP83867_STRAP_STS2_STRAP_FLD BIT(10)

/* PHY CTRL bits */
#define DP83867_PHYCR_TX_FIFO_DEPTH_SHIFT 14
@@ -145,6 +147,9 @@
/* CFG4 bits */
#define DP83867_CFG4_PORT_MIRROR_EN BIT(0)

+/* FLD_THR_CFG */
+#define DP83867_FLD_THR_CFG_ENERGY_LOST_THR_MASK 0x7
+
enum {
DP83867_PORT_MIRROING_KEEP,
DP83867_PORT_MIRROING_EN,
@@ -622,6 +627,20 @@ static int dp83867_config_init(struct phy_device *phydev)
phy_clear_bits_mmd(phydev, DP83867_DEVADDR, DP83867_CFG4,
BIT(7));

+ bs = phy_read_mmd(phydev, DP83867_DEVADDR, DP83867_STRAP_STS2);
+ if (bs & DP83867_STRAP_STS2_STRAP_FLD) {
+ /* When using strap to enable FLD, the ENERGY_LOST_FLD_THR will
+ * be set to 0x2. This may causes the PHY link to be unstable -
+ * the default value 0x1 need to be restored.
+ */
+ ret = phy_modify_mmd(phydev, DP83867_DEVADDR,
+ DP83867_FLD_THR_CFG,
+ DP83867_FLD_THR_CFG_ENERGY_LOST_THR_MASK,
+ 0x1);
+ if (ret)
+ return ret;
+ }
+
if (phy_interface_is_rgmii(phydev) ||
phydev->interface == PHY_INTERFACE_MODE_SGMII) {
val = phy_read(phydev, MII_DP83867_PHYCTRL);
--
2.17.1
\
 
 \ /
  Last update: 2020-03-17 19:05    [W:0.050 / U:1.100 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site