lkml.org 
[lkml]   [2020]   [Mar]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 0/4] Add XHCI, EHCI and OHCI support for Broadcom STB SoS's
On Fri, Mar 13, 2020 at 10:15:41AM -0400, Al Cooper wrote:
> This adds support for the XHCI, EHCI and OHCI host controllers found
> in Broadcom STB SoC's. These drivers depend on getting access to the
> new Broadcom STB USB PHY driver through a device-tree phandle and
> will fail if the driver is not available.

Hint to the future:

scripts/get_maintainer.pl --git --git-min-percent=67 ...

>
> Al Cooper (4):
> dt-bindings: Add Broadcom STB USB support
> usb: xhci: xhci-plat: Add support for Broadcom STB SoC's
> usb: ehci: Add new EHCI driver for Broadcom STB SoC's
> usb: host: Add ability to build new Broadcom STB USB drivers
>
> .../bindings/usb/brcm,bcm7445-ehci.yaml | 60 ++++
> .../devicetree/bindings/usb/usb-xhci.txt | 1 +
> MAINTAINERS | 9 +
> drivers/usb/host/Kconfig | 20 ++
> drivers/usb/host/Makefile | 20 +-
> drivers/usb/host/ehci-brcm.c | 288 ++++++++++++++++++
> drivers/usb/host/xhci-brcm.c | 16 +
> drivers/usb/host/xhci-brcm.h | 16 +
> drivers/usb/host/xhci-plat.c | 11 +
> 9 files changed, 435 insertions(+), 6 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/usb/brcm,bcm7445-ehci.yaml
> create mode 100644 drivers/usb/host/ehci-brcm.c
> create mode 100644 drivers/usb/host/xhci-brcm.c
> create mode 100644 drivers/usb/host/xhci-brcm.h
>
> --
> 2.17.1
>

--
With Best Regards,
Andy Shevchenko


\
 
 \ /
  Last update: 2020-03-13 17:18    [W:0.140 / U:1.404 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site