lkml.org 
[lkml]   [2020]   [Mar]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 2/4] dt-bindings: display: bridge: add it66121 bindings
Hi Neil,

On Fri, Mar 13, 2020 at 03:12:13PM +0100, Neil Armstrong wrote:
> On 13/03/2020 14:40, Laurent Pinchart wrote:
> > On Wed, Mar 11, 2020 at 01:51:33PM +0100, Phong LE wrote:
> >> Add the ITE bridge HDMI it66121 bindings.
> >>
> >> Signed-off-by: Phong LE <ple@baylibre.com>
> >> ---
> >> .../bindings/display/bridge/ite,it66121.yaml | 98 +++++++++++++++++++
> >> 1 file changed, 98 insertions(+)
> >> create mode 100644 Documentation/devicetree/bindings/display/bridge/ite,it66121.yaml
> >>
> >> diff --git a/Documentation/devicetree/bindings/display/bridge/ite,it66121.yaml b/Documentation/devicetree/bindings/display/bridge/ite,it66121.yaml
> >> new file mode 100644
> >> index 000000000000..1717e880d130
> >> --- /dev/null
> >> +++ b/Documentation/devicetree/bindings/display/bridge/ite,it66121.yaml
> >> @@ -0,0 +1,98 @@
> >> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> >> +%YAML 1.2
> >> +---
> >> +$id: http://devicetree.org/schemas/display/bridge/ite,it66121.yaml#
> >> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> >> +
> >> +title: ITE it66121 HDMI bridge Device Tree Bindings
> >> +
> >> +maintainers:
> >> + - Phong LE <ple@baylibre.com>
> >> + - Neil Armstrong <narmstrong@baylibre.com>
> >> +
> >> +description: |
> >> + The IT66121 is a high-performance and low-power single channel HDMI
> >> + transmitter, fully compliant with HDMI 1.3a, HDCP 1.2 and backward compatible
> >> + to DVI 1.0 specifications.
> >> +
> >> +properties:
> >> + compatible:
> >> + const: ite,it66121
> >> +
> >> + reg:
> >> + maxItems: 1
> >> + description: base I2C address of the device
> >> +
> >> + reset-gpios:
> >> + maxItems: 1
> >> + description: GPIO connected to active low reset
> >> +
> >> + vrf12-supply:
> >> + maxItems: 1
> >> + description: Regulator for 1.2V analog core power.
> >> +
> >> + vcn33-supply:
> >> + maxItems: 1
> >> + description: Regulator for 3.3V digital core power.
> >> +
> >> + vcn18-supply:
> >> + maxItems: 1
> >> + description: Regulator for 1.8V IO core power.
> >> +
> >> + interrupts:
> >> + maxItems: 1
> >> +
> >> + pclk-dual-edge:
> >> + maxItems: 1
> >> + description: enable pclk dual edge mode.
> >
> > I'm having a bit of trouble understanding how this operates. Looking at
> > the driver code the property is only taken into account to calculate the
> > maximum allowed frequency. How is the IT66121 configured for single vs.
> > dual pixel clock edge mode ?
>
> Dual edge mode is Dual-Data-Rate mode, the normal mode is MEDIA_BUS_FMT_RGB888_1X24 and dual edge is
> MEDIA_BUS_FMT_RGB888_2X12_LE (or MEDIA_BUS_FMT_RGB888_2X12_BE, not sure) on a single clock period.
>
> This should be negociated at runtime, but the bus width should be specified somewhere to select
> one of the modes.

How about replacing this property by bus-width to report the connected
bus width ? It should then become an endpoint property.

> >> +
> >> + port:
> >> + type: object
> >> +
> >> + properties:
> >> + endpoint:
> >> + type: object
> >> + description: |
> >> + Input endpoints of the bridge.
> >> +
> >> + required:
> >> + - endpoint
> >
> > You should have two ports, one for the bridge input, and one for the
> > bridge output.
> >
> >> +
> >> +required:
> >> + - compatible
> >> + - reg
> >> + - reset-gpios
> >> + - vrf12-supply
> >> + - vcn33-supply
> >> + - vcn18-supply
> >> + - interrupts
> >> + - port
> >> +
> >> +additionalProperties: false
> >> +
> >> +examples:
> >> + - |
> >> + i2c6 {
> >> + #address-cells = <1>;
> >> + #size-cells = <0>;
> >> +
> >> + it66121hdmitx: it66121hdmitx@4c {
> >> + compatible = "ite,it66121";
> >> + pinctrl-names = "default";
> >> + pinctrl-0 = <&ite_pins_default>;
> >> + vcn33-supply = <&mt6358_vcn33_wifi_reg>;
> >> + vcn18-supply = <&mt6358_vcn18_reg>;
> >> + vrf12-supply = <&mt6358_vrf12_reg>;
> >> + reset-gpios = <&pio 160 1 /* GPIO_ACTIVE_LOW */>;
> >> + interrupt-parent = <&pio>;
> >> + interrupts = <4 8 /* IRQ_TYPE_LEVEL_LOW */>;
> >> + reg = <0x4c>;
> >> + pclk-dual-edge;
> >> +
> >> + port {
> >> + it66121_in: endpoint {
> >> + remote-endpoint = <&display_out>;
> >> + };
> >> + };
> >> + };
> >> + };

--
Regards,

Laurent Pinchart

\
 
 \ /
  Last update: 2020-03-13 15:18    [W:0.057 / U:10.660 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site