lkml.org 
[lkml]   [2020]   [Mar]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [v1 2/3] media: ov8856: Add devicetree support
On Wed, Mar 11, 2020 at 02:32:30PM +0100, Robert Foss wrote:
> Hey Sakari,
>
> On Wed, 11 Mar 2020 at 12:49, Sakari Ailus <sakari.ailus@iki.fi> wrote:
> >
> > Hi Robert,
> >
> > On Tue, Mar 10, 2020 at 04:55:20PM +0100, Robert Foss wrote:
> > > Hi Andy,
> > >
> > > On Tue, 10 Mar 2020 at 15:26, Andy Shevchenko
> > > <andriy.shevchenko@linux.intel.com> wrote:
> > > >
> > > > On Tue, Mar 10, 2020 at 02:46:02PM +0100, Robert Foss wrote:
> > > > > Add devicetree match table, and enable ov8856_probe()
> > > > > to initialize power, clocks and reset pins.
> > > >
> > > > ...
> > > >
> > > > > +#define OV8856_NUM_SUPPLIES ARRAY_SIZE(ov8856_supply_names)
> > > >
> > > > Use ARRAY_SIZE() directly.
> > >
> > > Ack.
> > >
> > > >
> > > > Have you seen Sakari's comments?
> > > > Sakari, do I have déją vu or you indeed commented this driver?
> > >
> > > Yes, I may have missed some part of it, so please tell me if I have.
> > >
> > > There is a patchset floating around that implements a larger chunk of
> > > functionality,
> > > including a couple of new modes. This is based on that series.
> >
> > Please see earlier comments given against an earlier variant of this set.
> > They're on LMML.
> >
> > >
> > > >
> > > > ...
> > > >
> > > > > + gpiod_set_value_cansleep(ov8856->n_shutdn_gpio, GPIOD_OUT_LOW);
> > > >
> > > > > + gpiod_set_value_cansleep(ov8856->n_shutdn_gpio, GPIOD_OUT_HIGH);
> > > >
> > > > Yes, seems this one is inverted.
> > > >
> > > > ...
> > > >
> > > > > +{
> > > > > + gpiod_set_value_cansleep(ov8856->n_shutdn_gpio, GPIOD_OUT_LOW);
> > > > > + regulator_bulk_disable(OV8856_NUM_SUPPLIES, ov8856->supplies);
> > > > > + clk_disable_unprepare(ov8856->xvclk);
> > > > > +}
> > > > > +
> > > > > +
> > > >
> > > > One blank line is enough.
> > > >
> > > > ...
> > > >
> > > > > + ov8856->xvclk = devm_clk_get(&client->dev, "xvclk");
> > > > > + if (IS_ERR(ov8856->xvclk)) {
> > > > > + dev_err(&client->dev, "failed to get xvclk\n");
> > > > > + return -EINVAL;
> > > > > + }
> > > >
> > > > Previously it worked without clock provider, now you make a dependency.
> > > >
> > > > This won't work.
> > >
> > > So the ideal behavior would be to only use the xclk if it is provided?
> >
> > See e.g. the smiapp driver on how to do this so it continues to work on
> > ACPI.
>
> Thanks for the pointer!
>
> >
> > I think it'd be also appropriate to add the usleep() after lifting reset
> > only if the reset GPIO is defined for the device.
>
> Ack

On second thought, that probably applies if any of the resources needed for
powering the device on are defined. It could be that there's no reset GPIO
but a regulator is still there, in which case a delay is needed.

--
Sakari Ailus

\
 
 \ /
  Last update: 2020-03-11 17:18    [W:0.049 / U:1.040 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site