lkml.org 
[lkml]   [2020]   [Mar]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [v1 2/3] media: ov8856: Add devicetree support
Hi Robert,

On Tue, Mar 10, 2020 at 04:55:20PM +0100, Robert Foss wrote:
> Hi Andy,
>
> On Tue, 10 Mar 2020 at 15:26, Andy Shevchenko
> <andriy.shevchenko@linux.intel.com> wrote:
> >
> > On Tue, Mar 10, 2020 at 02:46:02PM +0100, Robert Foss wrote:
> > > Add devicetree match table, and enable ov8856_probe()
> > > to initialize power, clocks and reset pins.
> >
> > ...
> >
> > > +#define OV8856_NUM_SUPPLIES ARRAY_SIZE(ov8856_supply_names)
> >
> > Use ARRAY_SIZE() directly.
>
> Ack.
>
> >
> > Have you seen Sakari's comments?
> > Sakari, do I have déją vu or you indeed commented this driver?
>
> Yes, I may have missed some part of it, so please tell me if I have.
>
> There is a patchset floating around that implements a larger chunk of
> functionality,
> including a couple of new modes. This is based on that series.

Please see earlier comments given against an earlier variant of this set.
They're on LMML.

>
> >
> > ...
> >
> > > + gpiod_set_value_cansleep(ov8856->n_shutdn_gpio, GPIOD_OUT_LOW);
> >
> > > + gpiod_set_value_cansleep(ov8856->n_shutdn_gpio, GPIOD_OUT_HIGH);
> >
> > Yes, seems this one is inverted.
> >
> > ...
> >
> > > +{
> > > + gpiod_set_value_cansleep(ov8856->n_shutdn_gpio, GPIOD_OUT_LOW);
> > > + regulator_bulk_disable(OV8856_NUM_SUPPLIES, ov8856->supplies);
> > > + clk_disable_unprepare(ov8856->xvclk);
> > > +}
> > > +
> > > +
> >
> > One blank line is enough.
> >
> > ...
> >
> > > + ov8856->xvclk = devm_clk_get(&client->dev, "xvclk");
> > > + if (IS_ERR(ov8856->xvclk)) {
> > > + dev_err(&client->dev, "failed to get xvclk\n");
> > > + return -EINVAL;
> > > + }
> >
> > Previously it worked without clock provider, now you make a dependency.
> >
> > This won't work.
>
> So the ideal behavior would be to only use the xclk if it is provided?

See e.g. the smiapp driver on how to do this so it continues to work on
ACPI.

I think it'd be also appropriate to add the usleep() after lifting reset
only if the reset GPIO is defined for the device.

Also do consider dropping some people from the distribution. For many this
is just noise.

--
Kind regards,

Sakari Ailus

\
 
 \ /
  Last update: 2020-03-11 12:50    [W:0.061 / U:1.096 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site