lkml.org 
[lkml]   [2020]   [Mar]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH] usb: xhci: Error enumerating USB TV Tuner
Thanks!

Al

On Wed, Mar 11, 2020 at 3:28 AM Mathias Nyman
<mathias.nyman@linux.intel.com> wrote:
>
> On 10.3.2020 20.34, Alan Cooper wrote:
> > On Mon, Mar 9, 2020 at 8:19 AM Mathias Nyman
> > <mathias.nyman@linux.intel.com> wrote:
> >>
> >> On 6.3.2020 18.06, Al Cooper wrote:
> >>> Unable to complete the enumeration of a USB TV Tuner device.
> >>>
> >>> Per XHCI spec (4.6.5), the EP state field of the input context shall
> >>> be cleared for a set address command. In the special case of an FS
> >>> device that has "MaxPacketSize0 = 8", the Linux XHCI driver does
> >>> not do this before evaluating the context. With an XHCI controller
> >>> that checks the EP state field for parameter context error this
> >>> causes a problem in cases such as the device getting reset again
> >>> after enumeration.
> >>>
> >>> When that field is cleared, the problem does not occur.
> >>>
> >>> This was found and fixed by Sasi Kumar.
> >>>
> >>> Signed-off-by: Al Cooper <alcooperx@gmail.com>
> >>> ---
> >>> drivers/usb/host/xhci.c | 1 +
> >>> 1 file changed, 1 insertion(+)
> >>>
> >>> diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
> >>> index dbac0fa9748d..5f034e143082 100644
> >>> --- a/drivers/usb/host/xhci.c
> >>> +++ b/drivers/usb/host/xhci.c
> >>> @@ -1428,6 +1428,7 @@ static int xhci_check_maxpacket(struct xhci_hcd *xhci, unsigned int slot_id,
> >>> xhci->devs[slot_id]->out_ctx, ep_index);
> >>>
> >>> ep_ctx = xhci_get_ep_ctx(xhci, command->in_ctx, ep_index);
> >>> + ep_ctx->ep_info &= cpu_to_le32(~EP_STATE_MASK);/* must clear */
> >>> ep_ctx->ep_info2 &= cpu_to_le32(~MAX_PACKET_MASK);
> >>> ep_ctx->ep_info2 |= cpu_to_le32(MAX_PACKET(max_packet_size));
> >>>
> >>>
> >>
> >> Thanks, nice catch.
> >>
> >> If you agree I'd like to change the the subject of this patch to something like:
> >> "xhci: Fix enumeration issue when setting actual max packet size for FS devices"
> >>
> >> While looking at this it seems that the current EP_STATE_MASK is not correct either.
> >> It should be 0x7 instead of 0xf.
> >>
> >
> > Agree on both points.
> > Should I re-send a v2?
> >
>
> No need, I can make those changes
>
> -Mathias

\
 
 \ /
  Last update: 2020-03-11 12:41    [W:0.068 / U:0.268 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site