lkml.org 
[lkml]   [2020]   [Mar]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2] usb: gadget: aspeed: improve vhub port irq handling
Hi Ben,

On Wed, Mar 11, 2020 at 12:31:22PM +1100, Benjamin Herrenschmidt wrote:
> On Thu, 2020-03-05 at 15:47 -0800, rentao.bupt@gmail.com wrote:
> > From: Tao Ren <rentao.bupt@gmail.com>
> >
> > This patch evaluates vhub ports' irq mask before going through per-port
> > irq handling one by one, which helps to speed up irq handling in case
> > there is no port interrupt.
> >
> > Signed-off-by: Tao Ren <rentao.bupt@gmail.com>
> > ---
> > Changes in v2:
> > - use "for_each_set_bit" to speed up port irq handling.
> >
> > drivers/usb/gadget/udc/aspeed-vhub/core.c | 11 ++++++++---
> > drivers/usb/gadget/udc/aspeed-vhub/vhub.h | 8 +++-----
> > 2 files changed, 11 insertions(+), 8 deletions(-)
> >
> > diff --git a/drivers/usb/gadget/udc/aspeed-vhub/core.c b/drivers/usb/gadget/udc/aspeed-vhub/core.c
> > index f8d35dd60c34..af2dbd405361 100644
> > --- a/drivers/usb/gadget/udc/aspeed-vhub/core.c
> > +++ b/drivers/usb/gadget/udc/aspeed-vhub/core.c
> > @@ -134,11 +134,14 @@ static irqreturn_t ast_vhub_irq(int irq, void *data)
> > }
> >
> > /* Handle device interrupts */
> > - for (i = 0; i < vhub->max_ports; i++) {
> > - u32 dev_mask = VHUB_IRQ_DEVICE1 << i;
> > + if (istat & vhub->port_irq_mask) {
> > + int offset = VHUB_IRQ_DEV1_BIT;
> > + int size = VHUB_IRQ_DEV1_BIT + vhub->max_ports;
> >
> > - if (istat & dev_mask)
> > + for_each_set_bit_from(offset, (unsigned long *)&istat, size)
>
> That type cast is very bad. It will not work on big endian for example
> (yes this driver isn't used on big endian today but still).
>
> Please assign istat to an unsigned long (or make it unsigned long to
> begin with).

Thanks for pointing it out. Will fix it in v3.

Cheers,

Tao

\
 
 \ /
  Last update: 2020-03-12 01:10    [W:0.056 / U:0.480 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site