lkml.org 
[lkml]   [2020]   [Mar]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
SubjectRe: [PATCH net] net: phy: Avoid multiple suspends
From
Date
On 11.03.2020 10:17, Geert Uytterhoeven wrote:
> On Tue, Mar 10, 2020 at 5:47 PM Florian Fainelli <f.fainelli@gmail.com> wrote:
>>
>> On 3/10/20 7:16 AM, Geert Uytterhoeven wrote:
>>> Hi Florian, David,
>>>
>>> On Mon, Feb 24, 2020 at 5:59 AM David Miller <davem@davemloft.net> wrote:
>>>> From: Florian Fainelli <f.fainelli@gmail.com>
>>>> Date: Thu, 20 Feb 2020 15:34:53 -0800
>>>>
>>>>> It is currently possible for a PHY device to be suspended as part of a
>>>>> network device driver's suspend call while it is still being attached to
>>>>> that net_device, either via phy_suspend() or implicitly via phy_stop().
>>>>>
>>>>> Later on, when the MDIO bus controller get suspended, we would attempt
>>>>> to suspend again the PHY because it is still attached to a network
>>>>> device.
>>>>>
>>>>> This is both a waste of time and creates an opportunity for improper
>>>>> clock/power management bugs to creep in.
>>>>>
>>>>> Fixes: 803dd9c77ac3 ("net: phy: avoid suspending twice a PHY")
>>>>> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
>>>>
>>>> Applied, and queued up for -stable, thanks Florian.
>>>
>>> This patch causes a regression on r8a73a4/ape6evm and sh73a0/kzm9g.
>>> After resume from s2ram, Ethernet no longer works:
>>>
>>> PM: suspend exit
>>> nfs: server aaa.bbb.ccc.ddd not responding, still trying
>>> ...
>>>
>>> Reverting commit 503ba7c6961034ff ("net: phy: Avoid multiple suspends")
>>> fixes the issue.
>>>
>>> On both boards, an SMSC LAN9220 is connected to a power-managed local
>>> bus.
>>>
>>> I added some debug code to check when the clock driving the local bus
>>> is stopped and started, but I see no difference before/after. Hence I
>>> suspect the Ethernet chip is no longer reinitialized after resume.
>>
>> Can you provide a complete log?
>
> With some debug info:
>
> SDHI0 Vcc: disabling
> PM: suspend entry (deep)
> Filesystems sync: 0.002 seconds
> Freezing user space processes ... (elapsed 0.001 seconds) done.
> OOM killer disabled.
> Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
> PM: ==== a3sp/ee120000.sd: stop
> PM: ==== a3sp/ee100000.sd: stop
> smsc911x 8000000.ethernet: smsc911x_suspend:2577
> smsc911x 8000000.ethernet: smsc911x_suspend:2579 running
> smsc911x 8000000.ethernet: smsc911x_suspend:2584
> PM: ==== a3sp/ee200000.mmc: stop
> PM: ==== c4/fec10000.bus: stop
> PM: ==== a3sp/e6c40000.serial: stop
> PM: ==== c5/e61f0000.thermal: stop
> PM: ==== c4/e61c0200.interrupt-controller: stop
> PM: == a3sp: power off
> rmobile_pd_power_down: a3sp
> Disabling non-boot CPUs ...
> PM: ==== c4/e61c0200.interrupt-controller: start
> PM: ==== c5/e61f0000.thermal: start
> PM: ==== a3sp/e6c40000.serial: start
> PM: ==== c4/fec10000.bus: start
> PM: ==== a3sp/ee200000.mmc: start
> smsc911x 8000000.ethernet: smsc911x_resume:2606
> smsc911x 8000000.ethernet: smsc911x_resume:2625 running
> PM: ==== a3sp/ee100000.sd: start
> OOM killer enabled.
> Restarting tasks ... done.
> PM: ==== a3sp/ee120000.sd: start
> PM: suspend exit
> nfs: server aaa.bbb.ccc.ddd not responding, still trying
> ...
>
> But no difference between the good and the bad case, except for the nfs
> failures.
>
>> Do you use the Generic PHY driver or a
>> specialized one?
>
> CONFIG_FIXED_PHY=y
> CONFIG_SMSC_PHY=y
>
> Just the smsc,lan9115 node, cfr. arch/arm/boot/dts/r8a73a4-ape6evm.dts
>
>> Do you have a way to dump the registers at the time of
>> failure and see if BMCR.PDOWN is still set somehow?
>
> Added a hook into "nfs: server not responding", which prints:
>
> MII_BMCR = 0x1900
>
> i.e. BMCR_PDOWN = 0x0800 is still set.
>
>> Does the following help:
>>
>> diff --git a/drivers/net/ethernet/smsc/smsc911x.c
>> b/drivers/net/ethernet/smsc/smsc911x.c
>> index 49a6a9167af4..df17190c76c0 100644
>> --- a/drivers/net/ethernet/smsc/smsc911x.c
>> +++ b/drivers/net/ethernet/smsc/smsc911x.c
>> @@ -2618,6 +2618,7 @@ static int smsc911x_resume(struct device *dev)
>> if (netif_running(ndev)) {
>> netif_device_attach(ndev);
>> netif_start_queue(ndev);
>> + phy_resume(dev->phydev);
>> }
>>
>
> Yes i does, after s/dev->/ndev->/.
> Thanks!
>

This seems to be a workaround. And the same issue we may have with
other drivers too. Could you please alternatively test the following?
It tackles the issue that mdio_bus_phy_may_suspend() is used in
suspend AND resume, and both calls may return different values.

With this patch we call mdio_bus_phy_may_suspend() only when
suspending, and let the phy_device store whether it was suspended
by MDIO bus PM.

diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 32a5ceddc..6d6c6a178 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -286,6 +286,8 @@ static int mdio_bus_phy_suspend(struct device *dev)
if (!mdio_bus_phy_may_suspend(phydev))
return 0;

+ phydev->suspended_by_mdio_bus = 1;
+
return phy_suspend(phydev);
}

@@ -294,9 +296,11 @@ static int mdio_bus_phy_resume(struct device *dev)
struct phy_device *phydev = to_phy_device(dev);
int ret;

- if (!mdio_bus_phy_may_suspend(phydev))
+ if (!phydev->suspended_by_mdio_bus)
goto no_resume;

+ phydev->suspended_by_mdio_bus = 0;
+
ret = phy_resume(phydev);
if (ret < 0)
return ret;
diff --git a/include/linux/phy.h b/include/linux/phy.h
index 8b299476b..118de9f5b 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -357,6 +357,7 @@ struct macsec_ops;
* is_gigabit_capable: Set to true if PHY supports 1000Mbps
* has_fixups: Set to true if this phy has fixups/quirks.
* suspended: Set to true if this phy has been suspended successfully.
+ * suspended_by_mdio_bus: Set to true if this phy was suspended by MDIO bus.
* sysfs_links: Internal boolean tracking sysfs symbolic links setup/removal.
* loopback_enabled: Set true if this phy has been loopbacked successfully.
* state: state of the PHY for management purposes
@@ -396,6 +397,7 @@ struct phy_device {
unsigned is_gigabit_capable:1;
unsigned has_fixups:1;
unsigned suspended:1;
+ unsigned suspended_by_mdio_bus:1;
unsigned sysfs_links:1;
unsigned loopback_enabled:1;

--
2.25.1





\
 
 \ /
  Last update: 2020-03-11 22:23    [W:0.150 / U:0.004 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site