lkml.org 
[lkml]   [2020]   [Mar]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 7/7] usb: dwc3: qcom: Enable gpio-usb-conn based role-switching
Date
This patch adds the ability to receive a notification from the DRD code for
role-switch events and in doing so it introduces a disjunction between
gpio-usb-conn or extcon mode.

This is what we want to do, since the two methods are mutually exclusive.

Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Jack Pham <jackp@codeaurora.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: linux-usb@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
---
drivers/usb/dwc3/dwc3-qcom.c | 16 ++++++++++++++--
1 file changed, 14 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c
index 6f4b2b3cffce..f6a7ede5953e 100644
--- a/drivers/usb/dwc3/dwc3-qcom.c
+++ b/drivers/usb/dwc3/dwc3-qcom.c
@@ -571,6 +571,7 @@ static int dwc3_qcom_probe(struct platform_device *pdev)
struct device *dev = &pdev->dev;
struct dwc3_qcom *qcom;
struct resource *res, *parent_res = NULL;
+ struct dwc3 *dwc;
int ret, i;
bool ignore_pipe_clk;

@@ -669,8 +670,16 @@ static int dwc3_qcom_probe(struct platform_device *pdev)
if (qcom->mode == USB_DR_MODE_PERIPHERAL)
dwc3_qcom_vbus_overrride_enable(qcom, true);

- /* register extcon to override sw_vbus on Vbus change later */
- ret = dwc3_qcom_register_extcon(qcom);
+ if (dwc3_qcom_find_gpio_usb_connector(qcom->dwc3)) {
+ /* Using gpio-usb-conn register a notifier for VBUS */
+ dwc = platform_get_drvdata(qcom->dwc3);
+ qcom->vbus_nb.notifier_call = dwc3_qcom_vbus_notifier;
+ ret = dwc3_role_switch_notifier_register(dwc, &qcom->vbus_nb);
+ } else {
+ /* register extcon to override sw_vbus on Vbus change later */
+ ret = dwc3_qcom_register_extcon(qcom);
+ }
+
if (ret)
goto depopulate;

@@ -702,8 +711,11 @@ static int dwc3_qcom_remove(struct platform_device *pdev)
{
struct dwc3_qcom *qcom = platform_get_drvdata(pdev);
struct device *dev = &pdev->dev;
+ struct dwc3 *dwc = platform_get_drvdata(qcom->dwc3);
int i;

+ dwc3_role_switch_notifier_unregister(dwc, &qcom->vbus_nb);
+
of_platform_depopulate(dev);

for (i = qcom->num_clocks - 1; i >= 0; i--) {
--
2.25.1
\
 
 \ /
  Last update: 2020-03-11 20:16    [W:0.111 / U:0.148 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site