lkml.org 
[lkml]   [2020]   [Mar]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4.19 86/86] scsi: pm80xx: Fixed kernel panic during error recovery for SATA drive
Date
From: Deepak Ukey <deepak.ukey@microchip.com>

commit 196ba6629cf95e51403337235d09742fcdc3febd upstream.

Disabling the SATA drive interface cause kernel panic. When the drive
Interface is disabled, device should be deregistered after aborting all
pending I/Os. Also changed the port recovery timeout to 10000 ms for
PM8006 controller.

Signed-off-by: Deepak Ukey <deepak.ukey@microchip.com>
Signed-off-by: Viswas G <Viswas.G@microchip.com>
Reviewed-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
drivers/scsi/pm8001/pm8001_sas.c | 6 +++++-
drivers/scsi/pm8001/pm80xx_hwi.c | 2 +-
drivers/scsi/pm8001/pm80xx_hwi.h | 2 ++
3 files changed, 8 insertions(+), 2 deletions(-)

--- a/drivers/scsi/pm8001/pm8001_sas.c
+++ b/drivers/scsi/pm8001/pm8001_sas.c
@@ -866,6 +866,8 @@ static void pm8001_dev_gone_notify(struc
spin_unlock_irqrestore(&pm8001_ha->lock, flags);
pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev ,
dev, 1, 0);
+ while (pm8001_dev->running_req)
+ msleep(20);
spin_lock_irqsave(&pm8001_ha->lock, flags);
}
PM8001_CHIP_DISP->dereg_dev_req(pm8001_ha, device_id);
@@ -1238,8 +1240,10 @@ int pm8001_abort_task(struct sas_task *t
PM8001_MSG_DBG(pm8001_ha,
pm8001_printk("Waiting for Port reset\n"));
wait_for_completion(&completion_reset);
- if (phy->port_reset_status)
+ if (phy->port_reset_status) {
+ pm8001_dev_gone_notify(dev);
goto out;
+ }

/*
* 4. SATA Abort ALL
--- a/drivers/scsi/pm8001/pm80xx_hwi.c
+++ b/drivers/scsi/pm8001/pm80xx_hwi.c
@@ -604,7 +604,7 @@ static void update_main_config_table(str
pm8001_ha->main_cfg_tbl.pm80xx_tbl.port_recovery_timer &=
0x0000ffff;
pm8001_ha->main_cfg_tbl.pm80xx_tbl.port_recovery_timer |=
- 0x140000;
+ CHIP_8006_PORT_RECOVERY_TIMEOUT;
}
pm8001_mw32(address, MAIN_PORT_RECOVERY_TIMER,
pm8001_ha->main_cfg_tbl.pm80xx_tbl.port_recovery_timer);
--- a/drivers/scsi/pm8001/pm80xx_hwi.h
+++ b/drivers/scsi/pm8001/pm80xx_hwi.h
@@ -228,6 +228,8 @@
#define SAS_MAX_AIP 0x200000
#define IT_NEXUS_TIMEOUT 0x7D0
#define PORT_RECOVERY_TIMEOUT ((IT_NEXUS_TIMEOUT/100) + 30)
+/* Port recovery timeout, 10000 ms for PM8006 controller */
+#define CHIP_8006_PORT_RECOVERY_TIMEOUT 0x640000

#ifdef __LITTLE_ENDIAN_BITFIELD
struct sas_identify_frame_local {

\
 
 \ /
  Last update: 2020-03-10 14:15    [W:0.224 / U:1.536 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site