lkml.org 
[lkml]   [2020]   [Mar]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v2 1/5] ntb_perf: refactor code for CPU and DMA transfers


On 2020-03-10 2:54 p.m., Sanjay R Mehta wrote:
> From: Arindam Nath <arindam.nath@amd.com>
>
> This patch creates separate function to handle CPU
> and DMA transfers. Since CPU transfers use memcopy
> and DMA transfers use dmaengine APIs, these changes
> not only allow logical separation between the two,
> but also allows someone to clearly see the difference
> in the way the two are handled.
>
> In the case of DMA, we DMA from system memory to the
> memory window(MW) of NTB, which is a MMIO region, we
> should not use dma_map_page() for mapping MW. The
> correct way to map a MMIO region is to use
> dma_map_resource(), so the code is modified
> accordingly.
>
> dma_map_resource() expects physical address of the
> region to be mapped for DMA, we add a new field,
> outbuf_phys_addr, to struct perf_peer, and also
> another field, outbuf_dma_addr, to store the
> corresponding mapped address returned by the API.
>
> Since the MW is contiguous, rather than mapping
> chunk-by-chunk, we map the entire MW before the
> actual DMA transfer happens. Then for each chunk,
> we simply pass offset into the mapped region and
> DMA to that region. Then later, we unmap the MW
> during perf_clear_test().
>
> The above means that now we need to have different
> function parameters to deal with in the case of
> CPU and DMA transfers. In the case of CPU transfers,
> we simply need the CPU virtual addresses for memcopy,
> but in the case of DMA, we need dma_addr_t, which
> will be different from CPU physical address depending
> on whether IOMMU is enabled or not. Thus we now
> have two separate functions, perf_copy_chunk_cpu(),
> and perf_copy_chunk_dma() to take care of above
> consideration.
>
> Signed-off-by: Arindam Nath <arindam.nath@amd.com>
> Signed-off-by: Sanjay R Mehta <sanju.mehta@amd.com>
> ---
> drivers/ntb/test/ntb_perf.c | 141 +++++++++++++++++++++++++++++++++-----------
> 1 file changed, 105 insertions(+), 36 deletions(-)
>
> diff --git a/drivers/ntb/test/ntb_perf.c b/drivers/ntb/test/ntb_perf.c
> index e9b7c2d..6d16628 100644
> --- a/drivers/ntb/test/ntb_perf.c
> +++ b/drivers/ntb/test/ntb_perf.c
> @@ -149,6 +149,8 @@ struct perf_peer {
> u64 outbuf_xlat;
> resource_size_t outbuf_size;
> void __iomem *outbuf;
> + phys_addr_t outbuf_phys_addr;
> + dma_addr_t outbuf_dma_addr;
>
> /* Inbound MW params */
> dma_addr_t inbuf_xlat;
> @@ -775,26 +777,24 @@ static void perf_dma_copy_callback(void *data)
> wake_up(&pthr->dma_wait);
> }
>
> -static int perf_copy_chunk(struct perf_thread *pthr,
> - void __iomem *dst, void *src, size_t len)
> +static int perf_copy_chunk_cpu(struct perf_thread *pthr,
> + void __iomem *dst, void *src, size_t len)
> +{
> + memcpy_toio(dst, src, len);
> +
> + return likely(atomic_read(&pthr->perf->tsync) > 0) ? 0 : -EINTR;
> +}
> +
> +static int perf_copy_chunk_dma(struct perf_thread *pthr,
> + dma_addr_t dst, void *src, size_t len)
> {
> struct dma_async_tx_descriptor *tx;
> struct dmaengine_unmap_data *unmap;
> struct device *dma_dev;
> int try = 0, ret = 0;
>
> - if (!use_dma) {
> - memcpy_toio(dst, src, len);
> - goto ret_check_tsync;
> - }
> -
> dma_dev = pthr->dma_chan->device->dev;
> -
> - if (!is_dma_copy_aligned(pthr->dma_chan->device, offset_in_page(src),
> - offset_in_page(dst), len))
> - return -EIO;

Can you please split this patch into multiple patches? It is hard to
review and part of the reason this code is such a mess is because we
merged large patches with a bunch of different changes rolled into one,
many of which didn't get sufficient reviewer attention.

Patches that refactor things shouldn't be making functional changes
(like adding dma_map_resources()).


> -static int perf_run_test(struct perf_thread *pthr)
> +static int perf_run_test_cpu(struct perf_thread *pthr)
> {
> struct perf_peer *peer = pthr->perf->test_peer;
> struct perf_ctx *perf = pthr->perf;
> @@ -914,7 +903,7 @@ static int perf_run_test(struct perf_thread *pthr)
>
> /* Copied field is cleared on test launch stage */
> while (pthr->copied < total_size) {
> - ret = perf_copy_chunk(pthr, flt_dst, flt_src, chunk_size);
> + ret = perf_copy_chunk_cpu(pthr, flt_dst, flt_src, chunk_size);
> if (ret) {
> dev_err(&perf->ntb->dev, "%d: Got error %d on test\n",
> pthr->tidx, ret);
> @@ -937,6 +926,74 @@ static int perf_run_test(struct perf_thread *pthr)
> return 0;
> }
>
> +static int perf_run_test_dma(struct perf_thread *pthr)
> +{
> + struct perf_peer *peer = pthr->perf->test_peer;
> + struct perf_ctx *perf = pthr->perf;
> + struct device *dma_dev;
> + dma_addr_t flt_dst, bnd_dst;
> + u64 total_size, chunk_size;
> + void *flt_src;
> + int ret = 0;
> +
> + total_size = 1ULL << total_order;
> + chunk_size = 1ULL << chunk_order;
> + chunk_size = min_t(u64, peer->outbuf_size, chunk_size);
> +
> + /* Map MW for DMA */
> + dma_dev = pthr->dma_chan->device->dev;
> + peer->outbuf_dma_addr = dma_map_resource(dma_dev,
> + peer->outbuf_phys_addr,
> + peer->outbuf_size,
> + DMA_FROM_DEVICE, 0);
> + if (dma_mapping_error(dma_dev, peer->outbuf_dma_addr)) {
> + dma_unmap_resource(dma_dev, peer->outbuf_dma_addr,
> + peer->outbuf_size, DMA_FROM_DEVICE, 0);
> + return -EIO;
> + }
> +
> + flt_src = pthr->src;
> + bnd_dst = peer->outbuf_dma_addr + peer->outbuf_size;
> + flt_dst = peer->outbuf_dma_addr;
> +
> + pthr->duration = ktime_get();
> + /* Copied field is cleared on test launch stage */
> + while (pthr->copied < total_size) {
> + ret = perf_copy_chunk_dma(pthr, flt_dst, flt_src, chunk_size);
> + if (ret) {
> + dev_err(&perf->ntb->dev, "%d: Got error %d on test\n",
> + pthr->tidx, ret);
> + return ret;
> + }
> +

Honestly, this doesn't seem like a good approach to me. Duplicating the
majority of the perf_run_test() function is making the code more
complicated and harder to maintain.

You should be able to just selectively call dma_map_resources() in
perf_run_test(), or even in perf_setup_peer_mw() without needing to add
so much extra duplicate code.

Logan

\
 
 \ /
  Last update: 2020-03-10 22:21    [W:0.128 / U:0.860 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site