lkml.org 
[lkml]   [2020]   [Mar]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] dt-bindings: input: atmel_mxt_ts: convert atmel,maxtouch.txt to yaml
On Tue, Mar 03, 2020 at 07:25:33PM +0200, Dafna Hirschfeld wrote:
> Convert the binding file atmel,maxtouch.txt to yaml format.
> Also change the file name in the MAINTAINERS file.
>
> This was tested and verified on ARM and ARM64 with:
>
> make dt_binding_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/input/atmel,maxtouch.yaml
> make dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/input/atmel,maxtouch.yaml
>
> Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
> ---
> .../bindings/input/atmel,maxtouch.txt | 41 ------------
> .../bindings/input/atmel,maxtouch.yaml | 64 +++++++++++++++++++
> MAINTAINERS | 2 +-
> 3 files changed, 65 insertions(+), 42 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/input/atmel,maxtouch.txt
> create mode 100644 Documentation/devicetree/bindings/input/atmel,maxtouch.yaml
>
> diff --git a/Documentation/devicetree/bindings/input/atmel,maxtouch.txt b/Documentation/devicetree/bindings/input/atmel,maxtouch.txt
> deleted file mode 100644
> index c88919480d37..000000000000
> --- a/Documentation/devicetree/bindings/input/atmel,maxtouch.txt
> +++ /dev/null
> @@ -1,41 +0,0 @@
> -Atmel maXTouch touchscreen/touchpad
> -
> -Required properties:
> -- compatible:
> - atmel,maxtouch
> -
> - The following compatibles have been used in various products but are
> - deprecated:
> - atmel,qt602240_ts
> - atmel,atmel_mxt_ts
> - atmel,atmel_mxt_tp
> - atmel,mXT224
> -
> -- reg: The I2C address of the device
> -
> -- interrupts: The sink for the touchpad's IRQ output
> - See ../interrupt-controller/interrupts.txt
> -
> -Optional properties for main touchpad device:
> -
> -- linux,gpio-keymap: When enabled, the SPT_GPIOPWN_T19 object sends messages
> - on GPIO bit changes. An array of up to 8 entries can be provided
> - indicating the Linux keycode mapped to each bit of the status byte,
> - starting at the LSB. Linux keycodes are defined in
> - <dt-bindings/input/input.h>.
> -
> - Note: the numbering of the GPIOs and the bit they start at varies between
> - maXTouch devices. You must either refer to the documentation, or
> - experiment to determine which bit corresponds to which input. Use
> - KEY_RESERVED for unused padding values.
> -
> -- reset-gpios: GPIO specifier for the touchscreen's reset pin (active low)
> -
> -Example:
> -
> - touch@4b {
> - compatible = "atmel,maxtouch";
> - reg = <0x4b>;
> - interrupt-parent = <&gpio>;
> - interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_LEVEL_LOW>;
> - };
> diff --git a/Documentation/devicetree/bindings/input/atmel,maxtouch.yaml b/Documentation/devicetree/bindings/input/atmel,maxtouch.yaml
> new file mode 100644
> index 000000000000..024dc4ded4f3
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/input/atmel,maxtouch.yaml
> @@ -0,0 +1,64 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/input/atmel,maxtouch.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Atmel maXTouch touchscreen/touchpad
> +
> +maintainers:
> + - Nick Dyer <nick@shmanahar.org>
> +
> +description: |
> + Atmel maXTouch touchscreen/touchpad
> +
> +properties:
> + compatible:
> + const: atmel,maxtouch
> +
> + reg:
> + description: The I2C address of the device
> + maxItems: 1
> +
> + interrupts:
> + description: The sink for the touchpad's IRQ output

How many? Needs 'maxItems: 1'?

You can drop the description.

> +
> + linux,gpio-keymap:
> + description:
> + When enabled, the SPT_GPIOPWN_T19 object sends messages
> + on GPIO bit changes. An array of up to 8 entries can be provided
> + indicating the Linux keycode mapped to each bit of the status byte,
> + starting at the LSB. Linux keycodes are defined in
> + <dt-bindings/input/input.h>.
> + Note, the numbering of the GPIOs and the bit they start at varies between
> + maXTouch devices. You must either refer to the documentation, or
> + experiment to determine which bit corresponds to which input. Use
> + KEY_RESERVED for unused padding values.
> + $ref: /schemas/types.yaml#/definitions/uint32-array
> + maxItems: 8
> +
> + reset-gpios:
> + description: GPIO specifier for the touchscreen's reset pin (active low)
> + maxItems: 1
> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> +
> +additionalProperties: true

That's the default and we generally want this to be 'false'.

> +
> +examples:
> + - |
> + #include <dt-bindings/interrupt-controller/irq.h>
> + #include <dt-bindings/gpio/tegra-gpio.h>
> + i2c {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + touch@4b {
> + compatible = "atmel,maxtouch";
> + reg = <0x4b>;
> + interrupt-parent = <&gpio>;
> + interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_LEVEL_LOW>;
> + };
> + };
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 46fdb834d1fb..d553aa315734 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -2877,7 +2877,7 @@ ATMEL MAXTOUCH DRIVER
> M: Nick Dyer <nick@shmanahar.org>
> T: git git://github.com/ndyer/linux.git
> S: Maintained
> -F: Documentation/devicetree/bindings/input/atmel,maxtouch.txt
> +F: Documentation/devicetree/bindings/input/atmel,maxtouch.yaml
> F: drivers/input/touchscreen/atmel_mxt_ts.c
>
> ATMEL WIRELESS DRIVER
> --
> 2.17.1
>

\
 
 \ /
  Last update: 2020-03-10 22:15    [W:0.097 / U:2.160 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site