lkml.org 
[lkml]   [2020]   [Mar]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5.4 151/168] regulator: stm32-vrefbuf: fix a possible overshoot when re-enabling
Date
From: Fabrice Gasnier <fabrice.gasnier@st.com>

commit 02fbabd5f4ed182d2c616e49309f5a3efd9ec671 upstream.

There maybe an overshoot, when disabling, then re-enabling vrefbuf
too quickly. VREFBUF is used by ADC/DAC on some boards. When re-enabling
too quickly, an overshoot on the reference voltage make the conversions
inaccurate for a short period of time.
- Don't put the VREFBUF in HiZ when disabling, to force an active
discharge.
- Enforce a 1ms OFF/ON delay

Fixes: 0cdbf481e927 ("regulator: Add support for stm32-vrefbuf")

Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Message-Id: <1583312132-20932-1-git-send-email-fabrice.gasnier@st.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
drivers/regulator/stm32-vrefbuf.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/regulator/stm32-vrefbuf.c
+++ b/drivers/regulator/stm32-vrefbuf.c
@@ -88,7 +88,7 @@ static int stm32_vrefbuf_disable(struct
}

val = readl_relaxed(priv->base + STM32_VREFBUF_CSR);
- val = (val & ~STM32_ENVR) | STM32_HIZ;
+ val &= ~STM32_ENVR;
writel_relaxed(val, priv->base + STM32_VREFBUF_CSR);

pm_runtime_mark_last_busy(priv->dev);
@@ -175,6 +175,7 @@ static const struct regulator_desc stm32
.volt_table = stm32_vrefbuf_voltages,
.n_voltages = ARRAY_SIZE(stm32_vrefbuf_voltages),
.ops = &stm32_vrefbuf_volt_ops,
+ .off_on_delay = 1000,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
};

\
 
 \ /
  Last update: 2020-03-10 14:28    [W:0.497 / U:1.244 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site