lkml.org 
[lkml]   [2020]   [Feb]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v2 6/7] clk: qcom: gcc: Add global clock controller driver for SM8250
Date
Quoting Venkata Narendra Kumar Gutta (2020-01-24 14:32:26)
> diff --git a/drivers/clk/qcom/gcc-sm8250.c b/drivers/clk/qcom/gcc-sm8250.c
> new file mode 100644
> index 0000000..300187e
> --- /dev/null
> +++ b/drivers/clk/qcom/gcc-sm8250.c
> @@ -0,0 +1,3720 @@
[...]
> +
> +static const struct parent_map gcc_parent_map_0[] = {
> + { P_BI_TCXO, 0 },
> + { P_GPLL0_OUT_MAIN, 1 },
> + { P_GPLL0_OUT_EVEN, 6 },
> + { P_CORE_BI_PLL_TEST_SE, 7 },
> +};
> +
> +static const struct clk_parent_data gcc_parent_data_0[] = {
> + { .fw_name = "bi_tcxo" },
> + { .hw = &gpll0.clkr.hw },
> + { .hw = &gpll0_out_even.clkr.hw },
> + { .fw_name = "core_bi_pll_test_se", .name = "core_bi_pll_test_se" },
> +};
> +
> +static const struct clk_parent_data gcc_parent_data_0_ao[] = {
> + { .fw_name = "bi_tcxo_ao" },
> + { .hw = &gpll0.clkr.hw },
> + { .hw = &gpll0_out_even.clkr.hw },
> + { .fw_name = "core_bi_pll_test_se", .name = "core_bi_pll_test_se" },
> +};
> +
> +static const struct parent_map gcc_parent_map_1[] = {
> + { P_BI_TCXO, 0 },
> + { P_GPLL0_OUT_MAIN, 1 },
> + { P_SLEEP_CLK, 5 },
> + { P_GPLL0_OUT_EVEN, 6 },
> + { P_CORE_BI_PLL_TEST_SE, 7 },
> +};
> +
> +static const struct clk_parent_data gcc_parent_data_1[] = {
> + { .fw_name = "bi_tcxo" },
> + { .hw = &gpll0.clkr.hw },
> + { .fw_name = "sleep_clk", .name = "sleep_clk" },

Please drop .name

> + { .hw = &gpll0_out_even.clkr.hw },
> + { .fw_name = "core_bi_pll_test_se", .name = "core_bi_pll_test_se" },
> +};
> +
> +static const struct parent_map gcc_parent_map_2[] = {
> + { P_BI_TCXO, 0 },
> + { P_SLEEP_CLK, 5 },
> + { P_CORE_BI_PLL_TEST_SE, 7 },
> +};
> +
> +static const struct clk_parent_data gcc_parent_data_2[] = {
> + { .fw_name = "bi_tcxo" },
> + { .fw_name = "sleep_clk", .name = "sleep_clk" },

Please drop .name

> + { .fw_name = "core_bi_pll_test_se", .name = "core_bi_pll_test_se" },
> +};
> +
[...]
> +static const struct clk_parent_data gcc_parent_data_5[] = {
> + { .fw_name = "bi_tcxo" },
> + { .hw = &gpll0.clkr.hw },
> + { .fw_name = "aud_ref_clk", .name = "aud_ref_clk" },

Why have .name? Pleas remove it.

> + { .hw = &gpll0_out_even.clkr.hw },
> + { .fw_name = "core_bi_pll_test_se", .name = "core_bi_pll_test_se" },

Please drop these test inputs. I don't see any reason why they're listed.

> +};
> +
> +static const struct freq_tbl ftbl_gcc_cpuss_ahb_clk_src[] = {
> + F(19200000, P_BI_TCXO, 1, 0, 0),
> + { }
> +};
> +
> +static struct clk_branch gcc_sys_noc_cpuss_ahb_clk = {
> + .halt_reg = 0x48198,
> + .halt_check = BRANCH_HALT_VOTED,
> + .clkr = {
> + .enable_reg = 0x52000,
> + .enable_mask = BIT(0),
> + .hw.init = &(struct clk_init_data){
> + .name = "gcc_sys_noc_cpuss_ahb_clk",
> + .parent_data = &(const struct clk_parent_data){
> + .hw = &gcc_cpuss_ahb_postdiv_clk_src.clkr.hw,
> + },
> + .num_parents = 1,
> + .flags = CLK_IS_CRITICAL | CLK_SET_RATE_PARENT,
> + .ops = &clk_branch2_ops,
> + },
> + },
> +};

Is there a need for this clk to be exposed? Why can't we just turn the
bit on in probe and ignore it after that? I'd prefer to not have
CLK_IS_CRITICAL in this driver unless necessary.

> +
> +static struct clk_branch gcc_tsif_ahb_clk = {
> + .halt_reg = 0x36004,
> + .halt_check = BRANCH_HALT_VOTED,
> + .clkr = {
> + .enable_reg = 0x36004,
> + .enable_mask = BIT(0),
> + .hw.init = &(struct clk_init_data){
> + .name = "gcc_tsif_ahb_clk",
> + .ops = &clk_branch2_ops,
> + },
> + },
> +};
> +
[...]
> +
> +
> +static int gcc_sm8250_probe(struct platform_device *pdev)
> +{
> + struct regmap *regmap;
> + int ret;
> +
> + regmap = qcom_cc_map(pdev, &gcc_sm8250_desc);
> + if (IS_ERR(regmap))
> + return PTR_ERR(regmap);
> +
> + /*
> + * Disable the GPLL0 active input to NPU and GPU
> + * via MISC registers.
> + */
> + regmap_update_bits(regmap, 0x4d110, 0x3, 0x3);
> + regmap_update_bits(regmap, 0x71028, 0x3, 0x3);
> +
> + /*
> + * Keep the clocks always-ON
> + * GCC_VIDEO_AHB_CLK, GCC_CAMERA_AHB_CLK, GCC_DISP_AHB_CLK,
> + * GCC_CPUSS_DVM_BUS_CLK, GCC_GPU_CFG_AHB_CLK
> + */
> + regmap_update_bits(regmap, 0x0b004, BIT(0), BIT(0));
> + regmap_update_bits(regmap, 0x0b008, BIT(0), BIT(0));
> + regmap_update_bits(regmap, 0x0b00c, BIT(0), BIT(0));
> + regmap_update_bits(regmap, 0x4818c, BIT(0), BIT(0));
> + regmap_update_bits(regmap, 0x71004, BIT(0), BIT(0));

These look like the AHB clks above that we just enabled and then ignore.

> +
> + ret = qcom_cc_register_rcg_dfs(regmap, gcc_dfs_clocks,
> + ARRAY_SIZE(gcc_dfs_clocks));
> + if (ret)
> + return ret;
> +
> + return qcom_cc_really_probe(pdev, &gcc_sm8250_desc, regmap);
> +}

\
 
 \ /
  Last update: 2020-02-05 20:41    [W:0.180 / U:7.412 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site