lkml.org 
[lkml]   [2020]   [Feb]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [Patch v4 7/7] arm64: dts: qcom: Indicate rpmhpd hosts a power domain that can be used as a warming device.
On Wed, 20 Nov 2019 at 13:57, Thara Gopinath <thara.gopinath@linaro.org> wrote:
>
> RPMh hosts mx power domain that can be used to warm up the SoC. Indicate
> this by using #cooling-cells property.
>
> Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org>

Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>

Kind regards
Uffe


> ---
> v3->v4:
> - Removed subnode to indicate that mx power domain is a warming
> device. Instead #cooling-cells is used as a power domain
> provider property to indicate if the provider hosts a power
> domain that can be used as a warming device.
>
> arch/arm64/boot/dts/qcom/sdm845.dtsi | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> index 23260a0..71d6f91 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> @@ -3118,6 +3118,7 @@
> rpmhpd: power-controller {
> compatible = "qcom,sdm845-rpmhpd";
> #power-domain-cells = <1>;
> + #cooling-cells = <2>;
> operating-points-v2 = <&rpmhpd_opp_table>;
>
> rpmhpd_opp_table: opp-table {
> --
> 2.1.4
>

\
 
 \ /
  Last update: 2020-02-04 18:41    [W:0.194 / U:1.060 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site