lkml.org 
[lkml]   [2020]   [Feb]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 13/27] nvdimm/ocxl: Add support for Admin commands
On Tue, 3 Dec 2019 14:46:41 +1100
Alastair D'Silva <alastair@au1.ibm.com> wrote:

> From: Alastair D'Silva <alastair@d-silva.org>
>
> This patch requests the metadata required to issue admin commands, as well
> as some helper functions to construct and check the completion of the
> commands.
>
> Signed-off-by: Alastair D'Silva <alastair@d-silva.org>

A few trivial bits inline.

Jonathan

> ---
> drivers/nvdimm/ocxl/scm.c | 67 +++++++++++++
> drivers/nvdimm/ocxl/scm_internal.c | 152 +++++++++++++++++++++++++++++
> drivers/nvdimm/ocxl/scm_internal.h | 62 ++++++++++++
> 3 files changed, 281 insertions(+)
>
> diff --git a/drivers/nvdimm/ocxl/scm.c b/drivers/nvdimm/ocxl/scm.c
> index 8088f65c289e..1e175f3c3cf2 100644
> --- a/drivers/nvdimm/ocxl/scm.c
> +++ b/drivers/nvdimm/ocxl/scm.c
> @@ -267,6 +267,58 @@ static int scm_register_lpc_mem(struct scm_data *scm_data)
> return 0;
> }
>
> +/**
> + * scm_extract_command_metadata() - Extract command data from MMIO & save it for further use
> + * @scm_data: a pointer to the SCM device data
> + * @offset: The base address of the command data structures (address of CREQO)
> + * @command_metadata: A pointer to the command metadata to populate
> + * Return: 0 on success, negative on failure
> + */
> +static int scm_extract_command_metadata(struct scm_data *scm_data, u32 offset,
> + struct command_metadata *command_metadata)
> +{
> + int rc;
> + u64 tmp;
> +
> + rc = ocxl_global_mmio_read64(scm_data->ocxl_afu, offset, OCXL_LITTLE_ENDIAN,
> + &tmp);
> + if (rc)
> + return rc;
> +
> + command_metadata->request_offset = tmp >> 32;
> + command_metadata->response_offset = tmp & 0xFFFFFFFF;
> +
> + rc = ocxl_global_mmio_read64(scm_data->ocxl_afu, offset + 8, OCXL_LITTLE_ENDIAN,
> + &tmp);
> + if (rc)
> + return rc;
> +
> + command_metadata->data_offset = tmp >> 32;
> + command_metadata->data_size = tmp & 0xFFFFFFFF;
> +
> + command_metadata->id = 0;
> +
> + return 0;
> +}
> +
> +/**
> + * scm_setup_command_metadata() - Set up the command metadata
> + * @scm_data: a pointer to the SCM device data
> + */
> +static int scm_setup_command_metadata(struct scm_data *scm_data)
> +{
> + int rc;
> +
> + mutex_init(&scm_data->admin_command.lock);
> +
> + rc = scm_extract_command_metadata(scm_data, GLOBAL_MMIO_ACMA_CREQO,
> + &scm_data->admin_command);
> + if (rc)
> + return rc;

Unless you are adding to this later in the series.

return scm_extract_command_metadata(scm_data,...)

> +
> + return 0;
> +}
> +
> /**
> * scm_is_usable() - Is a controller usable?
> * @scm_data: a pointer to the SCM device data
> @@ -276,6 +328,8 @@ static bool scm_is_usable(const struct scm_data *scm_data)
> {
> u64 chi = 0;
> int rc = scm_chi(scm_data, &chi);
> + if (rc)
> + return false;
>
> if (!(chi & GLOBAL_MMIO_CHI_CRDY)) {
> dev_err(&scm_data->dev, "SCM controller is not ready.\n");
> @@ -502,6 +556,14 @@ static int scm_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
> }
> scm_data->pdev = pdev;
>
> + scm_data->timeouts[ADMIN_COMMAND_ERRLOG] = 2000; // ms
> + scm_data->timeouts[ADMIN_COMMAND_HEARTBEAT] = 100; // ms
> + scm_data->timeouts[ADMIN_COMMAND_SMART] = 100; // ms
> + scm_data->timeouts[ADMIN_COMMAND_CONTROLLER_DUMP] = 1000; // ms
> + scm_data->timeouts[ADMIN_COMMAND_CONTROLLER_STATS] = 100; // ms
> + scm_data->timeouts[ADMIN_COMMAND_SHUTDOWN] = 1000; // ms
> + scm_data->timeouts[ADMIN_COMMAND_FW_UPDATE] = 16000; // ms
> +
> pci_set_drvdata(pdev, scm_data);
>
> scm_data->ocxl_fn = ocxl_function_open(pdev);
> @@ -543,6 +605,11 @@ static int scm_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
> goto err;
> }
>
> + if (scm_setup_command_metadata(scm_data)) {
> + dev_err(&pdev->dev, "Could not read OCXL command matada\n");
> + goto err;
> + }
> +
> elapsed = 0;
> timeout = scm_data->readiness_timeout + scm_data->memory_available_timeout;
> while (!scm_is_usable(scm_data)) {
> diff --git a/drivers/nvdimm/ocxl/scm_internal.c b/drivers/nvdimm/ocxl/scm_internal.c
> index 72d3c0e7d846..7b11b56863fb 100644
> --- a/drivers/nvdimm/ocxl/scm_internal.c
> +++ b/drivers/nvdimm/ocxl/scm_internal.c
> @@ -17,3 +17,155 @@ int scm_chi(const struct scm_data *scm_data, u64 *chi)
>
> return 0;
> }
> +
> +static int scm_command_request(const struct scm_data *scm_data,
> + struct command_metadata *cmd, u8 op_code)
> +{
> + u64 val = op_code;
> + int rc;
> + u8 i;
> +
> + cmd->op_code = op_code;
> + cmd->id++;
> +
> + val |= ((u64)cmd->id) << 16;
> +
> + rc = ocxl_global_mmio_write64(scm_data->ocxl_afu, cmd->request_offset,
> + OCXL_LITTLE_ENDIAN, val);
> + if (rc)
> + return rc;
> +
> + for (i = 0x08; i <= 0x38; i += 0x08) {

perhaps use sizeof(u64) to explain where the 0x08s come from.
For the 0x38, might be worth a define.

> + rc = ocxl_global_mmio_write64(scm_data->ocxl_afu,
> + cmd->request_offset + i,
> + OCXL_LITTLE_ENDIAN, 0);
> + if (rc)
> + return rc;
> + }
> +
> + return 0;
> +}
> +
> +int scm_admin_command_request(struct scm_data *scm_data, u8 op_code)
> +{
> + u64 val;
> + int rc = ocxl_global_mmio_read64(scm_data->ocxl_afu, GLOBAL_MMIO_CHI,
> + OCXL_LITTLE_ENDIAN, &val);
> + if (rc)
> + return rc;
> +
> + return scm_command_request(scm_data, &scm_data->admin_command, op_code);
> +}
> +
> +static int scm_command_response(const struct scm_data *scm_data,
> + const struct command_metadata *cmd)
> +{
> + u64 val;
> + u16 id;
> + u8 status;
> + int rc = ocxl_global_mmio_read64(scm_data->ocxl_afu,
> + cmd->response_offset,
> + OCXL_LITTLE_ENDIAN, &val);
> + if (rc)
> + return rc;
> +
> + status = val & 0xff;
> + id = (val >> 16) & 0xffff;
> +
> + if (id != cmd->id) {
> + dev_warn(&scm_data->dev,
> + "Expected response for command %d, but received response for command %d instead.\n",
> + cmd->id, id);
> + }
> +
> + return status;
> +}
> +
> +int scm_admin_response(const struct scm_data *scm_data)
> +{
> + return scm_command_response(scm_data, &scm_data->admin_command);
> +}
> +
> +
> +int scm_admin_command_execute(const struct scm_data *scm_data)
> +{
> + return ocxl_global_mmio_set64(scm_data->ocxl_afu, GLOBAL_MMIO_HCI,
> + OCXL_LITTLE_ENDIAN, GLOBAL_MMIO_HCI_ACRW);
> +}
> +
> +static bool scm_admin_command_complete(const struct scm_data *scm_data)
> +{
> + u64 val = 0;
> +
> + int rc = scm_chi(scm_data, &val);
> +
> + WARN_ON(rc);
> +
> + return (val & GLOBAL_MMIO_CHI_ACRA) != 0;
> +}
> +
> +int scm_admin_command_complete_timeout(const struct scm_data *scm_data,
> + int command)
> +{
> + u32 timeout = scm_data->timeouts[command];
> + // 32 is the next power of 2 greater than the 20ms minimum for msleep
> +#define TIMEOUT_SLEEP_MILLIS 32
> + timeout /= TIMEOUT_SLEEP_MILLIS;
> + if (!timeout)
> + timeout = SCM_DEFAULT_TIMEOUT / TIMEOUT_SLEEP_MILLIS;
> +
> + while (timeout-- > 0) {
> + if (scm_admin_command_complete(scm_data))
> + return 0;
> + msleep(TIMEOUT_SLEEP_MILLIS);
> + }
> +
> + if (scm_admin_command_complete(scm_data))
> + return 0;
> +
> + return -EBUSY;
> +}
> +
> +int scm_admin_response_handled(const struct scm_data *scm_data)
> +{
> + return ocxl_global_mmio_set64(scm_data->ocxl_afu, GLOBAL_MMIO_CHIC,
> + OCXL_LITTLE_ENDIAN, GLOBAL_MMIO_CHI_ACRA);
> +}
> +
> +void scm_warn_status(const struct scm_data *scm_data, const char *message,
> + u8 status)
> +{
> + const char *text = "Unknown";
> +
> + switch (status) {
> + case STATUS_SUCCESS:
> + text = "Success";
> + break;
> +
> + case STATUS_MEM_UNAVAILABLE:
> + text = "Persistent memory unavailable";
> + break;
> +
> + case STATUS_BAD_OPCODE:
> + text = "Bad opcode";
> + break;
> +
> + case STATUS_BAD_REQUEST_PARM:
> + text = "Bad request parameter";
> + break;
> +
> + case STATUS_BAD_DATA_PARM:
> + text = "Bad data parameter";
> + break;
> +
> + case STATUS_DEBUG_BLOCKED:
> + text = "Debug action blocked";
> + break;
> +
> + case STATUS_FAIL:
> + text = "Failed";
> + break;
> + }
> +
> + dev_warn(&scm_data->dev, "%s: %s (%x)\n", message, text, status);
> +}
> diff --git a/drivers/nvdimm/ocxl/scm_internal.h b/drivers/nvdimm/ocxl/scm_internal.h
> index 584450f55e30..9bff684cd069 100644
> --- a/drivers/nvdimm/ocxl/scm_internal.h
> +++ b/drivers/nvdimm/ocxl/scm_internal.h
> @@ -6,6 +6,8 @@
> #include <linux/libnvdimm.h>
> #include <linux/mm.h>
>
> +#define SCM_DEFAULT_TIMEOUT 100
> +
> #define GLOBAL_MMIO_CHI 0x000
> #define GLOBAL_MMIO_CHIC 0x008
> #define GLOBAL_MMIO_CHIE 0x010
> @@ -80,6 +82,16 @@
>
> #define SCM_LABEL_AREA_SIZE (1UL << PA_SECTION_SHIFT)
>
> +struct command_metadata {
> + u32 request_offset;
> + u32 response_offset;
> + u32 data_offset;
> + u32 data_size;
> + struct mutex lock;
> + u16 id;
> + u8 op_code;
> +};
> +
> struct scm_function_0 {
> struct pci_dev *pdev;
> struct ocxl_fn *ocxl_fn;
> @@ -95,9 +107,11 @@ struct scm_data {
> struct ocxl_afu *ocxl_afu;
> struct ocxl_context *ocxl_context;
> void *metadata_addr;
> + struct command_metadata admin_command;
> struct resource scm_res;
> struct nd_region *nd_region;
> char fw_version[8+1];
> + u32 timeouts[ADMIN_COMMAND_MAX+1];
>
> u32 max_controller_dump_size;
> u16 scm_revision; // major/minor
> @@ -122,3 +136,51 @@ struct scm_data {
> * Returns 0 on success, negative on error
> */
> int scm_chi(const struct scm_data *scm_data, u64 *chi);
> +
> +/**
> + * scm_admin_command_request() - Issue an admin command request
> + * @scm_data: a pointer to the SCM device data
> + * @op_code: The op-code for the command
> + *
> + * Returns an identifier for the command, or negative on error
> + */
> +int scm_admin_command_request(struct scm_data *scm_data, u8 op_code);
> +
> +/**
> + * scm_admin_response() - Validate an admin response
> + * @scm_data: a pointer to the SCM device data
> + * Returns the status code of the command, or negative on error
> + */
> +int scm_admin_response(const struct scm_data *scm_data);
> +
> +/**
> + * scm_admin_command_execute() - Notify the controller to start processing a pending admin command
> + * @scm_data: a pointer to the SCM device data
> + * Returns 0 on success, negative on error
> + */
> +int scm_admin_command_execute(const struct scm_data *scm_data);
> +
> +/**
> + * scm_admin_command_complete_timeout() - Wait for an admin command to finish executing
> + * @scm_data: a pointer to the SCM device data
> + * @command: the admin command to wait for completion (determines the timeout)
> + * Returns 0 on success, -EBUSY on timeout
> + */
> +int scm_admin_command_complete_timeout(const struct scm_data *scm_data,
> + int command);
> +
> +/**
> + * scm_admin_response_handled() - Notify the controller that the admin response has been handled
> + * @scm_data: a pointer to the SCM device data
> + * Returns 0 on success, negative on failure
> + */
> +int scm_admin_response_handled(const struct scm_data *scm_data);
> +
> +/**
> + * scm_warn_status() - Emit a kernel warning showing a command status.
> + * @scm_data: a pointer to the SCM device data
> + * @message: A message to accompany the warning
> + * @status: The command status
> + */
> +void scm_warn_status(const struct scm_data *scm_data, const char *message,
> + u8 status);


\
 
 \ /
  Last update: 2020-02-03 15:19    [W:0.280 / U:9.332 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site