[lkml]   [2020]   [Feb]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Patch in this message
Subject[PATCH v3 3/7] dt-bindings: soc: qcom: Add RSC power domain specifier
In addition to transmitting resource state requests to the remote
processor, the RSC is responsible for powering off/lowering the
requirements from CPUs subsystem for the associated hardware like
buses, clocks, and regulators when all CPUs and cluster is powered down.

The power domain is configured to a low power state and when all the
CPUs are powered down, the RSC can lower resource state requirements
and power down the rails that power the CPUs.

Add PM domain specifier property for RSC controller.

Signed-off-by: Maulik Shah <>
Reviewed-by: Stephen Boyd <>
Documentation/devicetree/bindings/soc/qcom/rpmh-rsc.txt | 9 +++++++++
1 file changed, 9 insertions(+)

diff --git a/Documentation/devicetree/bindings/soc/qcom/rpmh-rsc.txt b/Documentation/devicetree/bindings/soc/qcom/rpmh-rsc.txt
index 9b86d1e..5682806 100644
--- a/Documentation/devicetree/bindings/soc/qcom/rpmh-rsc.txt
+++ b/Documentation/devicetree/bindings/soc/qcom/rpmh-rsc.txt
@@ -83,6 +83,14 @@ Properties:
Value type: <string>
Definition: Name for the RSC. The name would be used in trace logs.

+- #power-domain-cells:
+ Usage: optional
+ Value type: <u32>
+ Definition: Must be 0. Number of cells in power domain specifier.
+ Optional for controllers that may be in 'solver' state
+ where they can be in autonomous mode executing low power
+ modes.
Drivers that want to use the RSC to communicate with RPMH must specify their
bindings as child nodes of the RSC controllers they wish to communicate with.

@@ -112,6 +120,7 @@ TCS-OFFSET: 0xD00
+ #power-domain-cells = <0>;

Example 2:
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
 \ /
  Last update: 2020-02-03 14:37    [W:0.147 / U:0.600 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site