lkml.org 
[lkml]   [2020]   [Feb]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] mmc: host: sdhci-sprd: Set the missing MMC_CAP_WAIT_WHILE_BUSY flag
From
Date
On 24/02/20 11:08 am, Baolin Wang wrote:
> The Spreadtrum host controller supports HW busy detection for I/O
> operations, which means when the host gets a transfer complete event,
> that always indicates the busy signal is released. Thus we can set
> the MMC_CAP_WAIT_WHILE_BUSY flag to remove some redundant software
> busy polling.
>
> Signed-off-by: Baolin Wang <baolin.wang7@gmail.com>

Acked-by: Adrian Hunter <adrian.hunter@intel.com>

> ---
> drivers/mmc/host/sdhci-sprd.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/mmc/host/sdhci-sprd.c b/drivers/mmc/host/sdhci-sprd.c
> index d346223..2ab42c5 100644
> --- a/drivers/mmc/host/sdhci-sprd.c
> +++ b/drivers/mmc/host/sdhci-sprd.c
> @@ -556,7 +556,7 @@ static int sdhci_sprd_probe(struct platform_device *pdev)
> sdhci_sprd_voltage_switch;
>
> host->mmc->caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED |
> - MMC_CAP_ERASE | MMC_CAP_CMD23;
> + MMC_CAP_ERASE | MMC_CAP_CMD23 | MMC_CAP_WAIT_WHILE_BUSY;
> ret = mmc_of_parse(host->mmc);
> if (ret)
> goto pltfm_free;
>

\
 
 \ /
  Last update: 2020-02-27 14:20    [W:0.089 / U:2.380 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site