lkml.org 
[lkml]   [2020]   [Feb]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 7/7] mtd: rawnand: stm32_fmc2: Use dma_request_chan() instead dma_request_slave_channel()
Date
dma_request_slave_channel() is a wrapper on top of dma_request_chan()
eating up the error code.

Use using dma_request_chan() directly and inform user of error in case the
DMA request failed.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
drivers/mtd/nand/raw/stm32_fmc2_nand.c | 44 ++++++++++++++++++++++----
1 file changed, 37 insertions(+), 7 deletions(-)

diff --git a/drivers/mtd/nand/raw/stm32_fmc2_nand.c b/drivers/mtd/nand/raw/stm32_fmc2_nand.c
index 3ba73f18841f..b6d45cd911ae 100644
--- a/drivers/mtd/nand/raw/stm32_fmc2_nand.c
+++ b/drivers/mtd/nand/raw/stm32_fmc2_nand.c
@@ -1606,15 +1606,36 @@ static int stm32_fmc2_setup_interface(struct nand_chip *chip, int chipnr,
/* DMA configuration */
static int stm32_fmc2_dma_setup(struct stm32_fmc2_nfc *fmc2)
{
- int ret;
+ int ret = 0;

- fmc2->dma_tx_ch = dma_request_slave_channel(fmc2->dev, "tx");
- fmc2->dma_rx_ch = dma_request_slave_channel(fmc2->dev, "rx");
- fmc2->dma_ecc_ch = dma_request_slave_channel(fmc2->dev, "ecc");
+ fmc2->dma_tx_ch = dma_request_chan(fmc2->dev, "tx");
+ if (IS_ERR(fmc2->dma_tx_ch)) {
+ ret = PTR_ERR(fmc2->dma_tx_ch);
+ if (ret != -ENODEV)
+ dev_err(fmc2->dev,
+ "failed to request tx DMA channel: %d\n", ret);
+ fmc2->dma_tx_ch = NULL;
+ goto err_dma;
+ }

- if (!fmc2->dma_tx_ch || !fmc2->dma_rx_ch || !fmc2->dma_ecc_ch) {
- dev_warn(fmc2->dev, "DMAs not defined in the device tree, polling mode is used\n");
- return 0;
+ fmc2->dma_rx_ch = dma_request_chan(fmc2->dev, "rx");
+ if (IS_ERR(fmc2->dma_rx_ch)) {
+ ret = PTR_ERR(fmc2->dma_rx_ch);
+ if (ret != -ENODEV)
+ dev_err(fmc2->dev,
+ "failed to request rx DMA channel: %d\n", ret);
+ fmc2->dma_rx_ch = NULL;
+ goto err_dma;
+ }
+
+ fmc2->dma_ecc_ch = dma_request_chan(fmc2->dev, "ecc");
+ if (IS_ERR(fmc2->dma_ecc_ch)) {
+ ret = PTR_ERR(fmc2->dma_ecc_ch);
+ if (ret != -ENODEV)
+ dev_err(fmc2->dev,
+ "failed to request ecc DMA channel: %d\n", ret);
+ fmc2->dma_ecc_ch = NULL;
+ goto err_dma;
}

ret = sg_alloc_table(&fmc2->dma_ecc_sg, FMC2_MAX_SG, GFP_KERNEL);
@@ -1635,6 +1656,15 @@ static int stm32_fmc2_dma_setup(struct stm32_fmc2_nfc *fmc2)
init_completion(&fmc2->dma_ecc_complete);

return 0;
+
+err_dma:
+ if (ret == -ENODEV) {
+ dev_warn(fmc2->dev,
+ "DMAs not defined in the DT, polling mode is used\n");
+ ret = 0;
+ }
+
+ return ret;
}

/* NAND callbacks setup */
--
Peter
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

\
 
 \ /
  Last update: 2020-02-27 13:38    [W:0.111 / U:1.612 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site