lkml.org 
[lkml]   [2020]   [Feb]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] iio: adc: ti-tlc4541: Use new structure for SPI transfer delays
Date
In a recent change to the SPI subsystem [1], a new `delay` struct was added
to replace the `delay_usecs`. This change replaces the current
`delay_usecs` with `delay` for this driver.

The `spi_transfer_delay_exec()` function [in the SPI framework] makes sure
that both `delay_usecs` & `delay` are used (in this order to preserve
backwards compatibility).

[1] commit bebcfd272df6 ("spi: introduce `delay` field for
`spi_transfer` + spi_transfer_delay_exec()")

Signed-off-by: Sergiu Cuciurean <sergiu.cuciurean@analog.com>
---
drivers/iio/adc/ti-tlc4541.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/iio/adc/ti-tlc4541.c b/drivers/iio/adc/ti-tlc4541.c
index 4965246808bd..77620359b54c 100644
--- a/drivers/iio/adc/ti-tlc4541.c
+++ b/drivers/iio/adc/ti-tlc4541.c
@@ -189,7 +189,8 @@ static int tlc4541_probe(struct spi_device *spi)
/* Setup default message */
st->scan_single_xfer[0].rx_buf = &st->rx_buf[0];
st->scan_single_xfer[0].len = 3;
- st->scan_single_xfer[1].delay_usecs = 3;
+ st->scan_single_xfer[1].delay.value = 3;
+ st->scan_single_xfer[1].delay.unit = SPI_DELAY_UNIT_NSECS;
st->scan_single_xfer[2].rx_buf = &st->rx_buf[0];
st->scan_single_xfer[2].len = 2;

--
2.17.1
\
 
 \ /
  Last update: 2020-02-27 13:35    [W:0.027 / U:0.704 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site