lkml.org 
[lkml]   [2020]   [Feb]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RFC 0/8] MIPS: CI20: add HDMI out support
Hi Nikolaus.

On Wed, Feb 26, 2020 at 08:12:52PM +0100, H. Nikolaus Schaller wrote:
> This patch series adds HDMI output to the jz4780/CI20 board.
>
> It is based on taking the old 3.18 vendor kernel and trying
> to achieve the same with modern DTS setup and new/modified
> drivers.
>
> Unfortunately, in this first RFC, only EDID and creation of
> /dev/fb0 are working. Also, HDMI hot plugging is detected.
>
> But there is no HDMI output signal. So some tiny piece seems
> to be missing to enable/configure the Synposys HDMI controller.
>
> We need help from the community to fix this.
>
> Note: device tree bindings are from 2015 and still seem to
> fit - except they are not in yaml format.
>
> Original authors of most patches are
> * Paul Boddie <paul@boddie.org.uk>
> * Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
>
>
> H. Nikolaus Schaller (2):
> drm: ingenic-drm: add MODULE_DEVICE_TABLE
> MIPS: CI20: defconfig: configure for DRM_DW_HDMI_JZ4780
>
> Paul Boddie (4):
> drm: ingenic: add jz4780 Synopsys HDMI driver.
> pinctrl: ingenic: add hdmi-ddc pin control group
> MIPS: DTS: jz4780: account for Synopsys HDMI driver and LCD controller
> MIPS: DTS: CI20: add HDMI setup
>
> Zubair Lutfullah Kakakhel (2):
> dt-bindings: video: Add jz4780-lcd binding
> dt-bindings: video: Add jz4780-hdmi binding
>
> .../bindings/display/ingenic-jz4780-hdmi.txt | 41 ++++++
> .../bindings/display/ingenic-jz4780-lcd.txt | 39 ++++++
New bindings in DT Schema format please...
We want to have then in a formal launguage so we can use these
to verify the DT files.

Sam

\
 
 \ /
  Last update: 2020-02-27 13:24    [W:0.106 / U:0.568 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site