lkml.org 
[lkml]   [2020]   [Feb]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5.4 036/135] usb: dwc3: debug: fix string position formatting mixup with ret and len
Date
From: Colin Ian King <colin.king@canonical.com>

commit b32196e35bd7bbc8038db1aba1fbf022dc469b6a upstream.

Currently the string formatting is mixing up the offset of ret and
len. Re-work the code to use just len, remove ret and use scnprintf
instead of snprintf and len position accumulation where required.
Remove the -ve return check since scnprintf never returns a failure
-ve size. Also break overly long lines to clean up checkpatch
warnings.

Addresses-Coverity: ("Unused value")
Fixes: 1381a5113caf ("usb: dwc3: debug: purge usage of strcat")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200210095139.328711-1-colin.king@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
drivers/usb/dwc3/debug.h | 39 +++++++++++++++------------------------
1 file changed, 15 insertions(+), 24 deletions(-)

--- a/drivers/usb/dwc3/debug.h
+++ b/drivers/usb/dwc3/debug.h
@@ -256,86 +256,77 @@ static inline const char *dwc3_ep_event_
u8 epnum = event->endpoint_number;
size_t len;
int status;
- int ret;

- ret = snprintf(str, size, "ep%d%s: ", epnum >> 1,
+ len = scnprintf(str, size, "ep%d%s: ", epnum >> 1,
(epnum & 1) ? "in" : "out");
- if (ret < 0)
- return "UNKNOWN";

status = event->status;

switch (event->endpoint_event) {
case DWC3_DEPEVT_XFERCOMPLETE:
- len = strlen(str);
- snprintf(str + len, size - len, "Transfer Complete (%c%c%c)",
+ len += scnprintf(str + len, size - len,
+ "Transfer Complete (%c%c%c)",
status & DEPEVT_STATUS_SHORT ? 'S' : 's',
status & DEPEVT_STATUS_IOC ? 'I' : 'i',
status & DEPEVT_STATUS_LST ? 'L' : 'l');

- len = strlen(str);
-
if (epnum <= 1)
- snprintf(str + len, size - len, " [%s]",
+ scnprintf(str + len, size - len, " [%s]",
dwc3_ep0_state_string(ep0state));
break;
case DWC3_DEPEVT_XFERINPROGRESS:
- len = strlen(str);
-
- snprintf(str + len, size - len, "Transfer In Progress [%d] (%c%c%c)",
+ scnprintf(str + len, size - len,
+ "Transfer In Progress [%d] (%c%c%c)",
event->parameters,
status & DEPEVT_STATUS_SHORT ? 'S' : 's',
status & DEPEVT_STATUS_IOC ? 'I' : 'i',
status & DEPEVT_STATUS_LST ? 'M' : 'm');
break;
case DWC3_DEPEVT_XFERNOTREADY:
- len = strlen(str);
-
- snprintf(str + len, size - len, "Transfer Not Ready [%d]%s",
+ len += scnprintf(str + len, size - len,
+ "Transfer Not Ready [%d]%s",
event->parameters,
status & DEPEVT_STATUS_TRANSFER_ACTIVE ?
" (Active)" : " (Not Active)");

- len = strlen(str);
-
/* Control Endpoints */
if (epnum <= 1) {
int phase = DEPEVT_STATUS_CONTROL_PHASE(event->status);

switch (phase) {
case DEPEVT_STATUS_CONTROL_DATA:
- snprintf(str + ret, size - ret,
+ scnprintf(str + len, size - len,
" [Data Phase]");
break;
case DEPEVT_STATUS_CONTROL_STATUS:
- snprintf(str + ret, size - ret,
+ scnprintf(str + len, size - len,
" [Status Phase]");
}
}
break;
case DWC3_DEPEVT_RXTXFIFOEVT:
- snprintf(str + ret, size - ret, "FIFO");
+ scnprintf(str + len, size - len, "FIFO");
break;
case DWC3_DEPEVT_STREAMEVT:
status = event->status;

switch (status) {
case DEPEVT_STREAMEVT_FOUND:
- snprintf(str + ret, size - ret, " Stream %d Found",
+ scnprintf(str + len, size - len, " Stream %d Found",
event->parameters);
break;
case DEPEVT_STREAMEVT_NOTFOUND:
default:
- snprintf(str + ret, size - ret, " Stream Not Found");
+ scnprintf(str + len, size - len, " Stream Not Found");
break;
}

break;
case DWC3_DEPEVT_EPCMDCMPLT:
- snprintf(str + ret, size - ret, "Endpoint Command Complete");
+ scnprintf(str + len, size - len, "Endpoint Command Complete");
break;
default:
- snprintf(str, size, "UNKNOWN");
+ scnprintf(str + len, size - len, "UNKNOWN");
}

return str;

\
 
 \ /
  Last update: 2020-02-27 15:28    [W:0.395 / U:1.268 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site