lkml.org 
[lkml]   [2020]   [Feb]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5.5 083/150] drm/nouveau/kms/gv100-: Re-set LUT after clearing for modesets
Date
From: Lyude Paul <lyude@redhat.com>

commit f287d3d19769b1d22cba4e51fa0487f2697713c9 upstream.

While certain modeset operations on gv100+ need us to temporarily
disable the LUT, we make the mistake of sometimes neglecting to
reprogram the LUT after such modesets. In particular, moving a head from
one encoder to another seems to trigger this quite often. GV100+ is very
picky about having a LUT in most scenarios, so this causes the display
engine to hang with the following error code:

disp: chid 1 stat 00005080 reason 5 [INVALID_STATE] mthd 0200 data
00000001 code 0000002d)

So, fix this by always re-programming the LUT if we're clearing it in a
state where the wndw is still visible, and has a XLUT handle programmed.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: facaed62b4cb ("drm/nouveau/kms/gv100: initial support")
Cc: <stable@vger.kernel.org> # v4.18+
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
drivers/gpu/drm/nouveau/dispnv50/wndw.c | 2 ++
1 file changed, 2 insertions(+)

--- a/drivers/gpu/drm/nouveau/dispnv50/wndw.c
+++ b/drivers/gpu/drm/nouveau/dispnv50/wndw.c
@@ -451,6 +451,8 @@ nv50_wndw_atomic_check(struct drm_plane
asyw->clr.ntfy = armw->ntfy.handle != 0;
asyw->clr.sema = armw->sema.handle != 0;
asyw->clr.xlut = armw->xlut.handle != 0;
+ if (asyw->clr.xlut && asyw->visible)
+ asyw->set.xlut = asyw->xlut.handle != 0;
asyw->clr.csc = armw->csc.valid;
if (wndw->func->image_clr)
asyw->clr.image = armw->image.handle[0] != 0;

\
 
 \ /
  Last update: 2020-02-27 15:23    [W:0.526 / U:0.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site