lkml.org 
[lkml]   [2020]   [Feb]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RFT PATCH 2/4] usb: dwc2: Do not update data length if it is 0 on inbound transfers
Date
The DWC2 documentation states that transfers with zero data length should
set the number of packets to 1 and the transfer length to 0. This is not
currently the case for inbound transfers: the transfer length is set to
the maximum packet length. This can have adverse effects if the chip
actually does transfer data as it is programmed to do. Follow chip
documentation and keep the transfer length set to 0 in that situation.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
---
drivers/usb/dwc2/hcd.c | 15 ++++++++-------
1 file changed, 8 insertions(+), 7 deletions(-)

diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c
index f6d8cc9cee34..506fdffd82ab 100644
--- a/drivers/usb/dwc2/hcd.c
+++ b/drivers/usb/dwc2/hcd.c
@@ -1313,19 +1313,20 @@ static void dwc2_hc_start_transfer(struct dwc2_hsotg *hsotg,
if (num_packets > max_hc_pkt_count) {
num_packets = max_hc_pkt_count;
chan->xfer_len = num_packets * chan->max_packet;
+ } else if (chan->ep_is_in) {
+ /*
+ * Always program an integral # of max packets
+ * for IN transfers.
+ * Note: This assumes that the input buffer is
+ * aligned and sized accordingly.
+ */
+ chan->xfer_len = num_packets * chan->max_packet;
}
} else {
/* Need 1 packet for transfer length of 0 */
num_packets = 1;
}

- if (chan->ep_is_in)
- /*
- * Always program an integral # of max packets for IN
- * transfers
- */
- chan->xfer_len = num_packets * chan->max_packet;
-
if (chan->ep_type == USB_ENDPOINT_XFER_INT ||
chan->ep_type == USB_ENDPOINT_XFER_ISOC)
/*
--
2.17.1
\
 
 \ /
  Last update: 2020-02-26 22:05    [W:0.149 / U:1.912 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site