lkml.org 
[lkml]   [2020]   [Feb]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] arm64: dts: mt8183: adjust cpuidle target residency
Date
Split a cluster level cpuidle state into two, so mt8183 variant
boards can adjust parameters for each cluster, and reduce cluster0's
default target residency to 1000us as power measurements showed that
its minimum residency is slightly less than cluster1's 1300us.

Signed-off-by: Ikjoon Jang <ikjn@chromium.org>
---
arch/arm64/boot/dts/mediatek/mt8183.dtsi | 26 ++++++++++++++++--------
1 file changed, 17 insertions(+), 9 deletions(-)

diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
index f1381e77918b..5c7dd262eaf3 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
@@ -74,7 +74,7 @@ cpu0: cpu@0 {
reg = <0x000>;
enable-method = "psci";
capacity-dmips-mhz = <741>;
- cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+ cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP0>;
};

cpu1: cpu@1 {
@@ -83,7 +83,7 @@ cpu1: cpu@1 {
reg = <0x001>;
enable-method = "psci";
capacity-dmips-mhz = <741>;
- cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+ cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP0>;
};

cpu2: cpu@2 {
@@ -92,7 +92,7 @@ cpu2: cpu@2 {
reg = <0x002>;
enable-method = "psci";
capacity-dmips-mhz = <741>;
- cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+ cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP0>;
};

cpu3: cpu@3 {
@@ -101,7 +101,7 @@ cpu3: cpu@3 {
reg = <0x003>;
enable-method = "psci";
capacity-dmips-mhz = <741>;
- cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+ cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP0>;
};

cpu4: cpu@100 {
@@ -110,7 +110,7 @@ cpu4: cpu@100 {
reg = <0x100>;
enable-method = "psci";
capacity-dmips-mhz = <1024>;
- cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+ cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP1>;
};

cpu5: cpu@101 {
@@ -119,7 +119,7 @@ cpu5: cpu@101 {
reg = <0x101>;
enable-method = "psci";
capacity-dmips-mhz = <1024>;
- cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+ cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP1>;
};

cpu6: cpu@102 {
@@ -128,7 +128,7 @@ cpu6: cpu@102 {
reg = <0x102>;
enable-method = "psci";
capacity-dmips-mhz = <1024>;
- cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+ cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP1>;
};

cpu7: cpu@103 {
@@ -137,7 +137,7 @@ cpu7: cpu@103 {
reg = <0x103>;
enable-method = "psci";
capacity-dmips-mhz = <1024>;
- cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+ cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP1>;
};

idle-states {
@@ -152,7 +152,15 @@ CPU_SLEEP: cpu-sleep {
min-residency-us = <800>;
};

- CLUSTER_SLEEP: cluster-sleep {
+ CLUSTER_SLEEP0: cluster-sleep@0 {
+ compatible = "arm,idle-state";
+ local-timer-stop;
+ arm,psci-suspend-param = <0x01010001>;
+ entry-latency-us = <250>;
+ exit-latency-us = <400>;
+ min-residency-us = <1000>;
+ };
+ CLUSTER_SLEEP1: cluster-sleep@1 {
compatible = "arm,idle-state";
local-timer-stop;
arm,psci-suspend-param = <0x01010001>;
--
2.25.0.265.gbab2e86ba0-goog
\
 
 \ /
  Last update: 2020-02-25 09:11    [W:0.039 / U:0.756 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site