lkml.org 
[lkml]   [2020]   [Feb]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH net-next v3 1/2] net: mscc: ocelot: Add support for tcam
Hi Vladimir,

The 02/24/2020 12:38, Vladimir Oltean wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
>
> Hi Horatiu,
>
> On Fri, 31 May 2019 at 10:18, Horatiu Vultur
> <horatiu.vultur@microchip.com> wrote:
> >
> > Add ACL support using the TCAM. Using ACL it is possible to create rules
> > in hardware to filter/redirect frames.
> >
> > Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
> > ---
> > arch/mips/boot/dts/mscc/ocelot.dtsi | 5 +-
> > drivers/net/ethernet/mscc/Makefile | 2 +-
> > drivers/net/ethernet/mscc/ocelot.c | 13 +
> > drivers/net/ethernet/mscc/ocelot.h | 8 +
> > drivers/net/ethernet/mscc/ocelot_ace.c | 777 +++++++++++++++++++++++++++++++
> > drivers/net/ethernet/mscc/ocelot_ace.h | 227 +++++++++
> > drivers/net/ethernet/mscc/ocelot_board.c | 1 +
> > drivers/net/ethernet/mscc/ocelot_regs.c | 11 +
> > drivers/net/ethernet/mscc/ocelot_s2.h | 64 +++
> > drivers/net/ethernet/mscc/ocelot_vcap.h | 403 ++++++++++++++++
> > 10 files changed, 1508 insertions(+), 3 deletions(-)
> > create mode 100644 drivers/net/ethernet/mscc/ocelot_ace.c
> > create mode 100644 drivers/net/ethernet/mscc/ocelot_ace.h
> > create mode 100644 drivers/net/ethernet/mscc/ocelot_s2.h
> > create mode 100644 drivers/net/ethernet/mscc/ocelot_vcap.h
> >
>
> I was testing this functionality and it looks like the MAC_ETYPE keys
> (src_mac, dst_mac) only match non-IP frames.
> Example, this rule doesn't drop ping traffic:
>
> tc qdisc add dev swp0 clsact
> tc filter add dev swp0 ingress flower skip_sw dst_mac
> 96:e1:ef:64:1b:44 action drop
>
> Would it be possible to do anything about that?

What you could do is to configure each port in such a way, to treat IP
frames as MAC_ETYPE frames. Have a look in ANA:PORT[0-11]:VCAP_S2_CFG.

There might be a problem with this approach. If you configure the port
in such a way, then all your rules with the keys IP6, IP4 will not be
match on that port.

>
> Thanks,
> -Vladimir

--
/Horatiu

\
 
 \ /
  Last update: 2020-02-24 12:05    [W:0.096 / U:1.932 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site