[lkml]   [2020]   [Feb]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH] ASoC: ti: Allocate dais dynamically for TDM and audio graph card
* Peter Ujfalusi <> [200220 14:08]:
> On 18/02/2020 17.28, Tony Lindgren wrote:
> > Right. I'm not attached to the dummy dai, but looks like currently
> > snd-soc-audio-graph-card won't work without it.
> The generic cards will link up a dummy dai/codec when it is needed by DPMC.

Not sure what should be fixed here..

> > And we potentially
> > do need a place to configure TDM slot specific stuff for mcbsp.
> Yes, but you still have one port and one endpoint should not change the
> configuration which is already in used for the other endpoint.

OK so what's the fix for snd-soc-audio-graph-card expecting a
separate DAI then?

> > Oh, I think there are Android apps to do that though.. Never tried
> > if they work on droid4. But if they do, doing a register dump of
> > mcbsp3 would show up how it's configured.
> I don't see how you could record the data from the line which is
> connected to McBSP_DX pin (the pin is output).
> But I might be missing something.

Yeah I don't know either, but the pins we have muxed for
mcbsp3 are:

/* 0x4a100106 abe_pdm_ul_data.abe_mcbsp3_dr ag25 */

/* 0x4a100108 abe_pdm_dl_data.abe_mcbsp3_dx af25 */

/* 0x4a10010a abe_pdm_frame.abe_mcbsp3_clkx ae25 */

/* 0x4a10010c abe_pdm_lb_clk.abe_mcbsp3_fsx af26 */

Isn't the data receive there as mcbsp3_dr?

> > I think the link for the patches you posted is patching the
> > snd-soc-audio-graph-card already?
> Yes it does, but the functionality is there via custom machine drivers.
> What I afraid is that such a complex wiring as the Droid4 have it might
> be not possible to use a generic - fits everything - driver without
> making it a customized one ;)
> Otho, if the only thing is the machine level DAPM switching and linking
> the paths then it might be relatively straight forward to extend the
> simple-card family.

Yeah or maybe it just needs to be handled directly in the cpcap,
mdm6600 codec drivers?

> > Right. So right now it seems that for snd-soc-audio-graph-card
> > needs the dummy dai, but it's unclear what would need to be
> > changed to not use a dummy dai for mcbsp.
> Since simple-card family can and will connect up dummy dai/codec when
> needed based on the setup, I would look at that and make it do so.

Oh so make simple-card spin up the dummy dai instead of mcbsp?

> > The dts snippets I posted earlier do follow the graph bindings
> > as far as I know. But just to confirm, do you see any need to
> > move things around there?
> It also states that a port is a physical port which can have multiple
> endpoints. But multiple endpoint != DAI. port == dai.

I guess I'm getting really confused now.. Are you saying
the dts needs to be changed too now?



 \ /
  Last update: 2020-02-20 21:15    [W:0.064 / U:0.284 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site