lkml.org 
[lkml]   [2020]   [Feb]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 05/27] powerpc: Map & release OpenCAPI LPC memory
From
Date
On Fri, 2020-02-14 at 12:09 +0100, Frederic Barrat wrote:
>
> Le 03/12/2019 à 04:46, Alastair D'Silva a écrit :
> > From: Alastair D'Silva <alastair@d-silva.org>
> >
> > This patch adds platform support to map & release LPC memory.
> >
> > Signed-off-by: Alastair D'Silva <alastair@d-silva.org>
> > ---
> > arch/powerpc/include/asm/pnv-ocxl.h | 2 ++
> > arch/powerpc/platforms/powernv/ocxl.c | 42
> > +++++++++++++++++++++++++++
> > 2 files changed, 44 insertions(+)
> >
> > diff --git a/arch/powerpc/include/asm/pnv-ocxl.h
> > b/arch/powerpc/include/asm/pnv-ocxl.h
> > index 7de82647e761..f8f8ffb48aa8 100644
> > --- a/arch/powerpc/include/asm/pnv-ocxl.h
> > +++ b/arch/powerpc/include/asm/pnv-ocxl.h
> > @@ -32,5 +32,7 @@ extern int pnv_ocxl_spa_remove_pe_from_cache(void
> > *platform_data, int pe_handle)
> >
> > extern int pnv_ocxl_alloc_xive_irq(u32 *irq, u64 *trigger_addr);
> > extern void pnv_ocxl_free_xive_irq(u32 irq);
> > +extern u64 pnv_ocxl_platform_lpc_setup(struct pci_dev *pdev, u64
> > size);
> > +extern void pnv_ocxl_platform_lpc_release(struct pci_dev *pdev);
> >
> > #endif /* _ASM_PNV_OCXL_H */
> > diff --git a/arch/powerpc/platforms/powernv/ocxl.c
> > b/arch/powerpc/platforms/powernv/ocxl.c
> > index 8c65aacda9c8..b56a48daf48c 100644
> > --- a/arch/powerpc/platforms/powernv/ocxl.c
> > +++ b/arch/powerpc/platforms/powernv/ocxl.c
> > @@ -475,6 +475,48 @@ void pnv_ocxl_spa_release(void *platform_data)
> > }
> > EXPORT_SYMBOL_GPL(pnv_ocxl_spa_release);
> >
> > +u64 pnv_ocxl_platform_lpc_setup(struct pci_dev *pdev, u64 size)
> > +{
> > + struct pci_controller *hose = pci_bus_to_host(pdev->bus);
> > + struct pnv_phb *phb = hose->private_data;
> > + u32 bdfn = pci_dev_id(pdev);
> > + __be64 base_addr_be64;
> > + u64 base_addr;
> > + int rc;
> > +
> > + rc = opal_npu_mem_alloc(phb->opal_id, bdfn, size,
> > &base_addr_be64);
> > + if (rc) {
> > + dev_warn(&pdev->dev,
> > + "OPAL could not allocate LPC memory, rc=%d\n",
> > rc);
> > + return 0;
> > + }
> > +
> > + base_addr = be64_to_cpu(base_addr_be64);
> > +
> > + rc = check_hotplug_memory_addressable(base_addr >> PAGE_SHIFT,
> > + size >> PAGE_SHIFT);
>
> check_hotplug_memory_addressable() is only declared if
> CONFIG_MEMORY_HOTPLUG_SPARSE is selected.
> I think we also need a #ifdef here.
>

Agreed. I think that since any actual use of the memory is going to be
dependant on both hotplug & sparse, moving the ifdef to wrap the
functions & declarations makes sense.


> Fred
>
>
> > + if (rc)
> > + return 0;
> > +
> > + return base_addr;
> > +}
> > +EXPORT_SYMBOL_GPL(pnv_ocxl_platform_lpc_setup);
> > +
> > +void pnv_ocxl_platform_lpc_release(struct pci_dev *pdev)
> > +{
> > + struct pci_controller *hose = pci_bus_to_host(pdev->bus);
> > + struct pnv_phb *phb = hose->private_data;
> > + u32 bdfn = pci_dev_id(pdev);
> > + int rc;
> > +
> > + rc = opal_npu_mem_release(phb->opal_id, bdfn);
> > + if (rc)
> > + dev_warn(&pdev->dev,
> > + "OPAL reported rc=%d when releasing LPC
> > memory\n", rc);
> > +}
> > +EXPORT_SYMBOL_GPL(pnv_ocxl_platform_lpc_release);
> > +
> > +
> > int pnv_ocxl_spa_remove_pe_from_cache(void *platform_data, int
> > pe_handle)
> > {
> > struct spa_data *data = (struct spa_data *) platform_data;
> >
--
Alastair D'Silva
Open Source Developer
Linux Technology Centre, IBM Australia
mob: 0423 762 819

\
 
 \ /
  Last update: 2020-02-19 00:45    [W:0.087 / U:8.100 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site