lkml.org 
[lkml]   [2020]   [Feb]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH net-next 3/3] net: phy: broadcom: Wire suspend/resume for BCM54810
On Fri, Feb 14, 2020 at 03:38:53PM -0800, Florian Fainelli wrote:
> The BCM54810 PHY can use the standard BMCR Power down suspend, but needs
> a custom resume routine which first clear the Power down bit, and then
> re-initializes the PHY. While in low-power mode, the PHY only accepts
> writes to the BMCR register. The datasheet clearly says it:
>
> Reads or writes to any MII register other than MII Control register
> (address 00h) while the device is in the standby power-down mode may
> cause unpredictable results.
>
> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

Reviewed-by: Andrew Lunn <andrew@lunn.ch>

Andrew

\
 
 \ /
  Last update: 2020-02-15 17:12    [W:0.052 / U:6.948 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site