[lkml]   [2020]   [Feb]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Patch in this message
Subject[PATCH 1/2] arm64: dts: imx8mm-evk: add phy-reset-gpios for fec1
imx8mm-evk has a GPIO connected to AR8031 Ethernet PHY's reset pin.

Describe it in the device tree, following phy's datasheet reset duration of 10ms.

Tested booting via NFS.

Signed-off-by: Alifer Moraes <>

Originally sent by Peng Fan <>

Back then CONFIG_AT803X_PHY was set as "m" in defconfig so the boot process hung
at nfs boot, now that CONFIG_AT803X_PHY is set as "y" by default, the patch works

Peng's original patch missed to pass the phy-reset-duration, according to the AR8031
datasheet the reset GPIO needs to stay low for 10ms.

Original thread:

arch/arm64/boot/dts/freescale/imx8mm-evk.dts | 2 ++
1 file changed, 2 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evk.dts b/arch/arm64/boot/dts/freescale/imx8mm-evk.dts
index 28ab17a277bb..11903ca86f0e 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-evk.dts
@@ -82,6 +82,8 @@
pinctrl-0 = <&pinctrl_fec1>;
phy-mode = "rgmii-id";
phy-handle = <&ethphy0>;
+ phy-reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
+ phy-reset-duration = <10>;
status = "okay";

 \ /
  Last update: 2020-02-14 20:28    [W:0.067 / U:2.536 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site