lkml.org 
[lkml]   [2020]   [Feb]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v1 2/2] scsi: ufs: Select INITIAL ADAPT type for HS Gear4
On 2020-02-11 21:38, Can Guo wrote:
> ADAPT is added specifically for HS Gear4 mode only, select INITIAL
> ADAPT
> before do power mode change to G4 and select NO ADAPT before switch to
> non-G4 modes.
>
> Signed-off-by: Can Guo <cang@codeaurora.org>
> ---

Reviewed-by: Asutosh Das <asutoshd@codeaurora.org>

> drivers/scsi/ufs/ufs-qcom.c | 14 ++++++++++++++
> drivers/scsi/ufs/unipro.h | 7 +++++++
> 2 files changed, 21 insertions(+)
>
> diff --git a/drivers/scsi/ufs/ufs-qcom.c b/drivers/scsi/ufs/ufs-qcom.c
> index d593523..6a905bb 100644
> --- a/drivers/scsi/ufs/ufs-qcom.c
> +++ b/drivers/scsi/ufs/ufs-qcom.c
> @@ -942,6 +942,20 @@ static int ufs_qcom_pwr_change_notify(struct
> ufs_hba *hba,
> if (!ufshcd_is_hs_mode(&hba->pwr_info) &&
> ufshcd_is_hs_mode(dev_req_params))
> ufs_qcom_dev_ref_clk_ctrl(host, true);
> +
> + if (host->hw_ver.major >= 0x4) {
> + if (dev_req_params->gear_tx == UFS_HS_G4) {
> + /* INITIAL ADAPT */
> + ufshcd_dme_set(hba,
> + UIC_ARG_MIB(PA_TXHSADAPTTYPE),
> + PA_INITIAL_ADAPT);
> + } else {
> + /* NO ADAPT */
> + ufshcd_dme_set(hba,
> + UIC_ARG_MIB(PA_TXHSADAPTTYPE),
> + PA_NO_ADAPT);
> + }
> + }
> break;
> case POST_CHANGE:
> if (ufs_qcom_cfg_timers(hba, dev_req_params->gear_rx,
> diff --git a/drivers/scsi/ufs/unipro.h b/drivers/scsi/ufs/unipro.h
> index 3dc4d8b..766d551 100644
> --- a/drivers/scsi/ufs/unipro.h
> +++ b/drivers/scsi/ufs/unipro.h
> @@ -146,6 +146,12 @@
> #define PA_SLEEPNOCONFIGTIME 0x15A2
> #define PA_STALLNOCONFIGTIME 0x15A3
> #define PA_SAVECONFIGTIME 0x15A4
> +#define PA_TXHSADAPTTYPE 0x15D4
> +
> +/* Adpat type for PA_TXHSADAPTTYPE attribute */
> +#define PA_REFRESH_ADAPT 0x00
> +#define PA_INITIAL_ADAPT 0x01
> +#define PA_NO_ADAPT 0x03
>
> #define PA_TACTIVATE_TIME_UNIT_US 10
> #define PA_HIBERN8_TIME_UNIT_US 100
> @@ -203,6 +209,7 @@ enum ufs_hs_gear_tag {
> UFS_HS_G1, /* HS Gear 1 (default for reset) */
> UFS_HS_G2, /* HS Gear 2 */
> UFS_HS_G3, /* HS Gear 3 */
> + UFS_HS_G4, /* HS Gear 4 */
> };
>
> enum ufs_unipro_ver {

\
 
 \ /
  Last update: 2020-02-12 18:05    [W:0.189 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site