[lkml]   [2020]   [Feb]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH v3 6/6] ASoC: qdsp6: dt-bindings: Add q6afe pcm dt binding documentation

On 12/02/2020 11:01, Adam Serbinski wrote:
>>> +
>>> + - qcom,pcm-slot-mapping
>>> +    Usage: required for pcm interface
>> Are these not specific to 8k and 16k mode ?
>> We should probably list values for both modes here.
> No, this is just the offset that the audio sample is placed in with
> respect to a maximum of 4 slots, 16 bits wide, beginning with the sync
> pulse.

That's not true atleast by the QDSP documentation,
according to it we will use more slots to transfer at higher sample
rate. ex:
16 kHz data can be transferred using 8 kHz samples in two

Also there are 32 slots for each of 4 supported channels for PCM AFE port.

> When switching between 8 and 16k sample rate, it is just the sync pulse
> rate that is changed. The audio sample will be delivered in the same
> slot, just at a different frequency.

 \ /
  Last update: 2020-02-12 12:44    [W:0.079 / U:1.876 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site