lkml.org 
[lkml]   [2020]   [Feb]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2] rtc: zynqmp: Clear alarm interrupt status before interrupt enable
On 12/02/2020 15:54:39+0530, Srinivas Neeli wrote:
> Fix multiple occurring interrupts for alarm interrupt. RTC module doesn't
> clear the alarm interrupt status bit immediately after the interrupt is
> triggered.This is due to the sticky nature of the alarm interrupt status
> register. The alarm interrupt status register can be cleared only after
> the second counter outruns the set alarm value. To fix multiple spurious
> interrupts, disable alarm interrupt in the handler and clear the status
> bit before enabling the alarm interrupt.
>
> Fixes: 11143c19eb57 ("rtc: add xilinx zynqmp rtc driver")
> Signed-off-by: Srinivas Neeli <srinivas.neeli@xilinx.com>
> ---
> Changes in V2:
> Addressed Michal Simek comments
> - Removed new line in declartion part.
> - Added new line before return.
> ---
> drivers/rtc/rtc-zynqmp.c | 27 +++++++++++++++++++++++----
> 1 file changed, 23 insertions(+), 4 deletions(-)
>
Applied, thanks.

--
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

\
 
 \ /
  Last update: 2020-02-12 12:24    [W:0.045 / U:4.460 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site